提交 f01aa633 编写于 作者: H Hariprasad Shenai 提交者: David S. Miller

cxgb4: Fix PCI-E Memory window interface for big-endian systems

When doing reads and writes to adapter memory via the PCI-E Memory Window
interface, data gets swizzled on 4-byte boundaries on Big-Endian systems
because we need to account for the register read/write interface which
incorporates a swizzle onto the Little-Endian PCI-E Bus.

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 2b0c2e2d
...@@ -1103,7 +1103,7 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port); ...@@ -1103,7 +1103,7 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port);
#define T4_MEMORY_WRITE 0 #define T4_MEMORY_WRITE 0
#define T4_MEMORY_READ 1 #define T4_MEMORY_READ 1
int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, u32 len, int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, u32 len,
__be32 *buf, int dir); void *buf, int dir);
static inline int t4_memory_write(struct adapter *adap, int mtype, u32 addr, static inline int t4_memory_write(struct adapter *adap, int mtype, u32 addr,
u32 len, __be32 *buf) u32 len, __be32 *buf)
{ {
......
...@@ -449,7 +449,7 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) ...@@ -449,7 +449,7 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc)
* @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC * @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
* @addr: address within indicated memory type * @addr: address within indicated memory type
* @len: amount of memory to transfer * @len: amount of memory to transfer
* @buf: host memory buffer * @hbuf: host memory buffer
* @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0) * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
* *
* Reads/writes an [almost] arbitrary memory region in the firmware: the * Reads/writes an [almost] arbitrary memory region in the firmware: the
...@@ -460,15 +460,17 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) ...@@ -460,15 +460,17 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc)
* caller's responsibility to perform appropriate byte order conversions. * caller's responsibility to perform appropriate byte order conversions.
*/ */
int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
u32 len, __be32 *buf, int dir) u32 len, void *hbuf, int dir)
{ {
u32 pos, offset, resid, memoffset; u32 pos, offset, resid, memoffset;
u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base; u32 edc_size, mc_size, win_pf, mem_reg, mem_aperture, mem_base;
u32 *buf;
/* Argument sanity checks ... /* Argument sanity checks ...
*/ */
if (addr & 0x3) if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
return -EINVAL; return -EINVAL;
buf = (u32 *)hbuf;
/* It's convenient to be able to handle lengths which aren't a /* It's convenient to be able to handle lengths which aren't a
* multiple of 32-bits because we often end up transferring files to * multiple of 32-bits because we often end up transferring files to
...@@ -532,14 +534,45 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, ...@@ -532,14 +534,45 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
/* Transfer data to/from the adapter as long as there's an integral /* Transfer data to/from the adapter as long as there's an integral
* number of 32-bit transfers to complete. * number of 32-bit transfers to complete.
*
* A note on Endianness issues:
*
* The "register" reads and writes below from/to the PCI-E Memory
* Window invoke the standard adapter Big-Endian to PCI-E Link
* Little-Endian "swizzel." As a result, if we have the following
* data in adapter memory:
*
* Memory: ... | b0 | b1 | b2 | b3 | ...
* Address: i+0 i+1 i+2 i+3
*
* Then a read of the adapter memory via the PCI-E Memory Window
* will yield:
*
* x = readl(i)
* 31 0
* [ b3 | b2 | b1 | b0 ]
*
* If this value is stored into local memory on a Little-Endian system
* it will show up correctly in local memory as:
*
* ( ..., b0, b1, b2, b3, ... )
*
* But on a Big-Endian system, the store will show up in memory
* incorrectly swizzled as:
*
* ( ..., b3, b2, b1, b0, ... )
*
* So we need to account for this in the reads and writes to the
* PCI-E Memory Window below by undoing the register read/write
* swizzels.
*/ */
while (len > 0) { while (len > 0) {
if (dir == T4_MEMORY_READ) if (dir == T4_MEMORY_READ)
*buf++ = (__force __be32) t4_read_reg(adap, *buf++ = le32_to_cpu((__force __le32)t4_read_reg(adap,
mem_base + offset); mem_base + offset));
else else
t4_write_reg(adap, mem_base + offset, t4_write_reg(adap, mem_base + offset,
(__force u32) *buf++); (__force u32)cpu_to_le32(*buf++));
offset += sizeof(__be32); offset += sizeof(__be32);
len -= sizeof(__be32); len -= sizeof(__be32);
...@@ -568,15 +601,16 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, ...@@ -568,15 +601,16 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
*/ */
if (resid) { if (resid) {
union { union {
__be32 word; u32 word;
char byte[4]; char byte[4];
} last; } last;
unsigned char *bp; unsigned char *bp;
int i; int i;
if (dir == T4_MEMORY_READ) { if (dir == T4_MEMORY_READ) {
last.word = (__force __be32) t4_read_reg(adap, last.word = le32_to_cpu(
mem_base + offset); (__force __le32)t4_read_reg(adap,
mem_base + offset));
for (bp = (unsigned char *)buf, i = resid; i < 4; i++) for (bp = (unsigned char *)buf, i = resid; i < 4; i++)
bp[i] = last.byte[i]; bp[i] = last.byte[i];
} else { } else {
...@@ -584,7 +618,7 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr, ...@@ -584,7 +618,7 @@ int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
for (i = resid; i < 4; i++) for (i = resid; i < 4; i++)
last.byte[i] = 0; last.byte[i] = 0;
t4_write_reg(adap, mem_base + offset, t4_write_reg(adap, mem_base + offset,
(__force u32) last.word); (__force u32)cpu_to_le32(last.word));
} }
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册