提交 eee47b7c 编写于 作者: A Andrew Lunn 提交者: Jason Cooper

ARM: Kirkwood: Add support for another ZyXEL NSA310 variant

There are a number of variants of the ZyXEL NSA310, with slightly
different LEDs, buttons and i2c devices. Add a DTS file to support one
more of these variants.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Tested-by: NTibor Hársszegi <tibor@harsszegi.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>
上级 2344a29a
......@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
kirkwood-nsa310a.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
......
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
model = "ZyXEL NSA310";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_usb_power_off: pmx-usb-power-off {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
nand@3000000 {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
gpios = <&gpio1 16 0>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_off>;
pinctrl-names = "default";
usb0_power_off: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power Off";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 21 0>;
};
};
};
/dts-v1/;
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/include/ "kirkwood-nsa310-common.dtsi"
/ {
model = "ZyXEL NSA310";
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
......@@ -41,11 +39,6 @@
marvell,function = "gpio";
};
pmx_usb_power_off: pmx-usb-power-off {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
......@@ -95,20 +88,6 @@
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
i2c@11000 {
......@@ -119,57 +98,6 @@
reg = <0x2e>;
};
};
nand@3000000 {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio_keys {
......@@ -246,30 +174,4 @@
gpios = <&gpio1 8 0>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
gpios = <&gpio1 16 0>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_off>;
pinctrl-names = "default";
usb0_power_off: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power Off";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 21 0>;
};
};
};
/dts-v1/;
/include/ "kirkwood-nsa310-common.dtsi"
/*
* There are at least two different NSA310 designs. This variant does
* not have the red USB Led.
*/
/ {
compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-names = "default";
pmx_led_esata_green: pmx-led-esata-green {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_led_esata_red: pmx-led-esata-red {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_led_usb_green: pmx-led-usb-green {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_usb_power_off: pmx-usb-power-off {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_led_sys_red: pmx-led-sys-red {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_btn_reset: pmx-btn-reset {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_btn_copy: pmx-btn-copy {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_led_copy_green: pmx-led-copy-green {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_led_copy_red: pmx-led-copy-red {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_hdd_green: pmx-led-hdd-green {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_hdd_red: pmx-led-hdd-red {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_btn_power: pmx-btn-power {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm85: lm85@2e {
compatible = "lm85";
reg = <0x2e>;
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
label = "Power Button";
linux,code = <116>;
gpios = <&gpio1 14 0>;
};
button@2 {
label = "Copy Button";
linux,code = <133>;
gpios = <&gpio1 5 1>;
};
button@3 {
label = "Reset Button";
linux,code = <0x198>;
gpios = <&gpio1 4 1>;
};
};
gpio-leds {
compatible = "gpio-leds";
green-sys {
label = "nsa310:green:sys";
gpios = <&gpio0 28 0>;
};
red-sys {
label = "nsa310:red:sys";
gpios = <&gpio0 29 0>;
};
green-hdd {
label = "nsa310:green:hdd";
gpios = <&gpio1 9 0>;
};
red-hdd {
label = "nsa310:red:hdd";
gpios = <&gpio1 10 0>;
};
green-esata {
label = "nsa310:green:esata";
gpios = <&gpio0 12 0>;
};
red-esata {
label = "nsa310:red:esata";
gpios = <&gpio0 13 0>;
};
green-usb {
label = "nsa310:green:usb";
gpios = <&gpio0 15 0>;
};
green-copy {
label = "nsa310:green:copy";
gpios = <&gpio1 7 0>;
};
red-copy {
label = "nsa310:red:copy";
gpios = <&gpio1 8 0>;
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册