usb: dwc3: Update speed checks for SuperSpeedPlus

Update various places where the speed is checked so that it takes into
account SuperSpeedPlus properly.
Signed-off-by: NJohn Youn <johnyoun@synopsys.com>
Signed-off-by: NFelipe Balbi <balbi@kernel.org>

drivers/usb/dwc3/ep0.c

@@ -356,7 +356,8 @@ static int dwc3_ep0_handle_status(struct dwc3 *dwc,
 		 */
 		usb_status |= dwc->gadget.is_selfpowered;
 
-		if (dwc->speed == DWC3_DSTS_SUPERSPEED) {
+		if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
+		    (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
 			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 			if (reg & DWC3_DCTL_INITU1ENA)
 				usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
@@ -426,7 +427,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 		case USB_DEVICE_U1_ENABLE:
 			if (state != USB_STATE_CONFIGURED)
 				return -EINVAL;
-			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+			if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+			    (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
 				return -EINVAL;
 
 			reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -440,7 +442,8 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 		case USB_DEVICE_U2_ENABLE:
 			if (state != USB_STATE_CONFIGURED)
 				return -EINVAL;
-			if (dwc->speed != DWC3_DSTS_SUPERSPEED)
+			if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
+			    (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
 				return -EINVAL;
 
 			reg = dwc3_readl(dwc->regs, DWC3_DCTL);

drivers/usb/dwc3/gadget.c

@@ -463,7 +463,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
 
 	/* Burst size is only needed in SuperSpeed mode */
-	if (dwc->gadget.speed == USB_SPEED_SUPER) {
+	if (dwc->gadget.speed >= USB_SPEED_SUPER) {
 		u32 burst = dep->endpoint.maxburst - 1;
 
 		params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst);
@@ -1441,7 +1441,8 @@ static int dwc3_gadget_wakeup(struct usb_gadget *g)
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
 	speed = reg & DWC3_DSTS_CONNECTSPD;
-	if (speed == DWC3_DSTS_SUPERSPEED) {
+	if ((speed == DWC3_DSTS_SUPERSPEED) ||
+	    (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
 		dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
 		ret = -EINVAL;
 		goto out;
@@ -2340,7 +2341,8 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
 	 * this. Maybe it becomes part of the power saving plan.
 	 */
 
-	if (speed != DWC3_DSTS_SUPERSPEED)
+	if ((speed != DWC3_DSTS_SUPERSPEED) &&
+	    (speed != DWC3_DSTS_SUPERSPEED_PLUS))
 		return;
 
 	/*
@@ -2410,8 +2412,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 
 	/* Enable USB2 LPM Capability */
 
-	if ((dwc->revision > DWC3_REVISION_194A)
-			&& (speed != DWC3_DCFG_SUPERSPEED)) {
+	if ((dwc->revision > DWC3_REVISION_194A) &&
+	    (speed != DWC3_DCFG_SUPERSPEED) &&
+	    (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
 		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 		reg |= DWC3_DCFG_LPM_CAP;
 		dwc3_writel(dwc->regs, DWC3_DCFG, reg);