提交 ecb7dece 编写于 作者: P Peter Ujfalusi 提交者: Vinod Koul

dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type

This change makes the DT file to be easier to read since the memcpy
channels array does not need the '/bits/ 16' to be specified, which might
confuse some people.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
上级 8005c49d
......@@ -22,8 +22,7 @@ Required properties:
Optional properties:
- ti,hwmods: Name of the hwmods associated to the eDMA CC
- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
these channels will be SW triggered channels. The list must
contain 16 bits numbers, see example.
these channels will be SW triggered channels. See example.
- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
the driver, they are allocated to be used by for example the
DSP. See example.
......@@ -56,7 +55,7 @@ edma: edma@49000000 {
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
/* Channel 20 and 21 is allocated for memcpy */
ti,edma-memcpy-channels = /bits/ 16 <20 21>;
ti,edma-memcpy-channels = <20 21>;
/* The following PaRAM slots are reserved: 35-45 and 100-110 */
ti,edma-reserved-slot-ranges = /bits/ 16 <35 10>,
/bits/ 16 <100 10>;
......
......@@ -1752,16 +1752,14 @@ static enum dma_status edma_tx_status(struct dma_chan *chan,
return ret;
}
static bool edma_is_memcpy_channel(int ch_num, u16 *memcpy_channels)
static bool edma_is_memcpy_channel(int ch_num, s32 *memcpy_channels)
{
s16 *memcpy_ch = memcpy_channels;
if (!memcpy_channels)
return false;
while (*memcpy_ch != -1) {
if (*memcpy_ch == ch_num)
while (*memcpy_channels != -1) {
if (*memcpy_channels == ch_num)
return true;
memcpy_ch++;
memcpy_channels++;
}
return false;
}
......@@ -1775,7 +1773,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
{
struct dma_device *s_ddev = &ecc->dma_slave;
struct dma_device *m_ddev = NULL;
s16 *memcpy_channels = ecc->info->memcpy_channels;
s32 *memcpy_channels = ecc->info->memcpy_channels;
int i, j;
dma_cap_zero(s_ddev->cap_mask);
......@@ -1996,16 +1994,16 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev,
prop = of_find_property(dev->of_node, "ti,edma-memcpy-channels", &sz);
if (prop) {
const char pname[] = "ti,edma-memcpy-channels";
size_t nelm = sz / sizeof(s16);
s16 *memcpy_ch;
size_t nelm = sz / sizeof(s32);
s32 *memcpy_ch;
memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s16),
memcpy_ch = devm_kcalloc(dev, nelm + 1, sizeof(s32),
GFP_KERNEL);
if (!memcpy_ch)
return ERR_PTR(-ENOMEM);
ret = of_property_read_u16_array(dev->of_node, pname,
(u16 *)memcpy_ch, nelm);
ret = of_property_read_u32_array(dev->of_node, pname,
(u32 *)memcpy_ch, nelm);
if (ret)
return ERR_PTR(ret);
......
......@@ -72,7 +72,7 @@ struct edma_soc_info {
struct edma_rsv_info *rsv;
/* List of channels allocated for memcpy, terminated with -1 */
s16 *memcpy_channels;
s32 *memcpy_channels;
s8 (*queue_priority_mapping)[2];
const s16 (*xbar_chans)[2];
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册