提交 ecb3c2bb 编写于 作者: C Catalin Marinas

Merge tag 'deps-irqchip-gic-3.17' of git://git.infradead.org/users/jcooper/linux

* tag 'deps-irqchip-gic-3.17' of git://git.infradead.org/users/jcooper/linux:
  irqchip: gic-v3: Initial support for GICv3
  irqchip: gic: Move some bits of GICv2 to a library-type file

Conflicts:
	arch/arm64/Kconfig
......@@ -10,6 +10,7 @@ config ARM64
select ARM_ARCH_TIMER
select ARM_GIC
select AUDIT_ARCH_COMPAT_GENERIC
select ARM_GIC_V3
select BUILDTIME_EXTABLE_SORT
select CLONE_BACKWARDS
select COMMON_CLK
......
......@@ -22,6 +22,7 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
......@@ -289,6 +290,23 @@ CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
msr cnthctl_el2, x0
msr cntvoff_el2, xzr // Clear virtual offset
#ifdef CONFIG_ARM_GIC_V3
/* GICv3 system register access */
mrs x0, id_aa64pfr0_el1
ubfx x0, x0, #24, #4
cmp x0, #1
b.ne 3f
mrs x0, ICC_SRE_EL2
orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1
msr ICC_SRE_EL2, x0
isb // Make sure SRE is now set
msr ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
3:
#endif
/* Populate ID registers. */
mrs x0, midr_el1
mrs x1, mpidr_el1
......
......@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
......
......@@ -10,6 +10,11 @@ config ARM_GIC
config GIC_NON_BANKED
bool
config ARM_GIC_V3
bool
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
config ARM_NVIC
bool
select IRQ_DOMAIN
......
......@@ -15,7 +15,8 @@ obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-common.o
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
......
/*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip/arm-gic.h>
#include "irq-gic-common.h"
void gic_configure_irq(unsigned int irq, unsigned int type,
void __iomem *base, void (*sync_access)(void))
{
u32 enablemask = 1 << (irq % 32);
u32 enableoff = (irq / 32) * 4;
u32 confmask = 0x2 << ((irq % 16) * 2);
u32 confoff = (irq / 16) * 4;
bool enabled = false;
u32 val;
/*
* Read current configuration register, and insert the config
* for "irq", depending on "type".
*/
val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
if (type == IRQ_TYPE_LEVEL_HIGH)
val &= ~confmask;
else if (type == IRQ_TYPE_EDGE_RISING)
val |= confmask;
/*
* As recommended by the spec, disable the interrupt before changing
* the configuration
*/
if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
if (sync_access)
sync_access();
enabled = true;
}
/*
* Write back the new configuration, and possibly re-enable
* the interrupt.
*/
writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
if (enabled)
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
if (sync_access)
sync_access();
}
void __init gic_dist_config(void __iomem *base, int gic_irqs,
void (*sync_access)(void))
{
unsigned int i;
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
writel_relaxed(0, base + GIC_DIST_CONFIG + i / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as they are enabled by redistributor registers.
*/
for (i = 32; i < gic_irqs; i += 32)
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i / 8);
if (sync_access)
sync_access();
}
void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
{
int i;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
*/
writel_relaxed(0xffff0000, base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(0x0000ffff, base + GIC_DIST_ENABLE_SET);
/*
* Set priority on PPI and SGI interrupts
*/
for (i = 0; i < 32; i += 4)
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
if (sync_access)
sync_access();
}
/*
* Copyright (C) 2002 ARM Limited, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _IRQ_GIC_COMMON_H
#define _IRQ_GIC_COMMON_H
#include <linux/of.h>
#include <linux/irqdomain.h>
void gic_configure_irq(unsigned int irq, unsigned int type,
void __iomem *base, void (*sync_access)(void));
void gic_dist_config(void __iomem *base, int gic_irqs,
void (*sync_access)(void));
void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
#endif /* _IRQ_GIC_COMMON_H */
/*
* Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/cputype.h>
#include <asm/exception.h>
#include <asm/smp_plat.h>
#include "irq-gic-common.h"
#include "irqchip.h"
struct gic_chip_data {
void __iomem *dist_base;
void __iomem **redist_base;
void __percpu __iomem **rdist;
struct irq_domain *domain;
u64 redist_stride;
u32 redist_regions;
unsigned int irq_nr;
};
static struct gic_chip_data gic_data __read_mostly;
#define gic_data_rdist() (this_cpu_ptr(gic_data.rdist))
#define gic_data_rdist_rd_base() (*gic_data_rdist())
#define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K)
/* Our default, arbitrary priority value. Linux only uses one anyway. */
#define DEFAULT_PMR_VALUE 0xf0
static inline unsigned int gic_irq(struct irq_data *d)
{
return d->hwirq;
}
static inline int gic_irq_in_rdist(struct irq_data *d)
{
return gic_irq(d) < 32;
}
static inline void __iomem *gic_dist_base(struct irq_data *d)
{
if (gic_irq_in_rdist(d)) /* SGI+PPI -> SGI_base for this CPU */
return gic_data_rdist_sgi_base();
if (d->hwirq <= 1023) /* SPI -> dist_base */
return gic_data.dist_base;
if (d->hwirq >= 8192)
BUG(); /* LPI Detected!!! */
return NULL;
}
static void gic_do_wait_for_rwp(void __iomem *base)
{
u32 count = 1000000; /* 1s! */
while (readl_relaxed(base + GICD_CTLR) & GICD_CTLR_RWP) {
count--;
if (!count) {
pr_err_ratelimited("RWP timeout, gone fishing\n");
return;
}
cpu_relax();
udelay(1);
};
}
/* Wait for completion of a distributor change */
static void gic_dist_wait_for_rwp(void)
{
gic_do_wait_for_rwp(gic_data.dist_base);
}
/* Wait for completion of a redistributor change */
static void gic_redist_wait_for_rwp(void)
{
gic_do_wait_for_rwp(gic_data_rdist_rd_base());
}
/* Low level accessors */
static u64 gic_read_iar(void)
{
u64 irqstat;
asm volatile("mrs %0, " __stringify(ICC_IAR1_EL1) : "=r" (irqstat));
return irqstat;
}
static void gic_write_pmr(u64 val)
{
asm volatile("msr " __stringify(ICC_PMR_EL1) ", %0" : : "r" (val));
}
static void gic_write_ctlr(u64 val)
{
asm volatile("msr " __stringify(ICC_CTLR_EL1) ", %0" : : "r" (val));
isb();
}
static void gic_write_grpen1(u64 val)
{
asm volatile("msr " __stringify(ICC_GRPEN1_EL1) ", %0" : : "r" (val));
isb();
}
static void gic_write_sgi1r(u64 val)
{
asm volatile("msr " __stringify(ICC_SGI1R_EL1) ", %0" : : "r" (val));
}
static void gic_enable_sre(void)
{
u64 val;
asm volatile("mrs %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
val |= ICC_SRE_EL1_SRE;
asm volatile("msr " __stringify(ICC_SRE_EL1) ", %0" : : "r" (val));
isb();
/*
* Need to check that the SRE bit has actually been set. If
* not, it means that SRE is disabled at EL2. We're going to
* die painfully, and there is nothing we can do about it.
*
* Kindly inform the luser.
*/
asm volatile("mrs %0, " __stringify(ICC_SRE_EL1) : "=r" (val));
if (!(val & ICC_SRE_EL1_SRE))
pr_err("GIC: unable to set SRE (disabled at EL2), panic ahead\n");
}
static void gic_enable_redist(void)
{
void __iomem *rbase;
u32 count = 1000000; /* 1s! */
u32 val;
rbase = gic_data_rdist_rd_base();
/* Wake up this CPU redistributor */
val = readl_relaxed(rbase + GICR_WAKER);
val &= ~GICR_WAKER_ProcessorSleep;
writel_relaxed(val, rbase + GICR_WAKER);
while (readl_relaxed(rbase + GICR_WAKER) & GICR_WAKER_ChildrenAsleep) {
count--;
if (!count) {
pr_err_ratelimited("redist didn't wake up...\n");
return;
}
cpu_relax();
udelay(1);
};
}
/*
* Routines to disable, enable, EOI and route interrupts
*/
static void gic_poke_irq(struct irq_data *d, u32 offset)
{
u32 mask = 1 << (gic_irq(d) % 32);
void (*rwp_wait)(void);
void __iomem *base;
if (gic_irq_in_rdist(d)) {
base = gic_data_rdist_sgi_base();
rwp_wait = gic_redist_wait_for_rwp;
} else {
base = gic_data.dist_base;
rwp_wait = gic_dist_wait_for_rwp;
}
writel_relaxed(mask, base + offset + (gic_irq(d) / 32) * 4);
rwp_wait();
}
static int gic_peek_irq(struct irq_data *d, u32 offset)
{
u32 mask = 1 << (gic_irq(d) % 32);
void __iomem *base;
if (gic_irq_in_rdist(d))
base = gic_data_rdist_sgi_base();
else
base = gic_data.dist_base;
return !!(readl_relaxed(base + offset + (gic_irq(d) / 32) * 4) & mask);
}
static void gic_mask_irq(struct irq_data *d)
{
gic_poke_irq(d, GICD_ICENABLER);
}
static void gic_unmask_irq(struct irq_data *d)
{
gic_poke_irq(d, GICD_ISENABLER);
}
static void gic_eoi_irq(struct irq_data *d)
{
gic_write_eoir(gic_irq(d));
}
static int gic_set_type(struct irq_data *d, unsigned int type)
{
unsigned int irq = gic_irq(d);
void (*rwp_wait)(void);
void __iomem *base;
/* Interrupt configuration for SGIs can't be changed */
if (irq < 16)
return -EINVAL;
if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
return -EINVAL;
if (gic_irq_in_rdist(d)) {
base = gic_data_rdist_sgi_base();
rwp_wait = gic_redist_wait_for_rwp;
} else {
base = gic_data.dist_base;
rwp_wait = gic_dist_wait_for_rwp;
}
gic_configure_irq(irq, type, base, rwp_wait);
return 0;
}
static u64 gic_mpidr_to_affinity(u64 mpidr)
{
u64 aff;
aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 32 |
MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 |
MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 |
MPIDR_AFFINITY_LEVEL(mpidr, 0));
return aff;
}
static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
{
u64 irqnr;
do {
irqnr = gic_read_iar();
if (likely(irqnr > 15 && irqnr < 1020)) {
u64 irq = irq_find_mapping(gic_data.domain, irqnr);
if (likely(irq)) {
handle_IRQ(irq, regs);
continue;
}
WARN_ONCE(true, "Unexpected SPI received!\n");
gic_write_eoir(irqnr);
}
if (irqnr < 16) {
gic_write_eoir(irqnr);
#ifdef CONFIG_SMP
handle_IPI(irqnr, regs);
#else
WARN_ONCE(true, "Unexpected SGI received!\n");
#endif
continue;
}
} while (irqnr != ICC_IAR1_EL1_SPURIOUS);
}
static void __init gic_dist_init(void)
{
unsigned int i;
u64 affinity;
void __iomem *base = gic_data.dist_base;
/* Disable the distributor */
writel_relaxed(0, base + GICD_CTLR);
gic_dist_wait_for_rwp();
gic_dist_config(base, gic_data.irq_nr, gic_dist_wait_for_rwp);
/* Enable distributor with ARE, Group1 */
writel_relaxed(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1,
base + GICD_CTLR);
/*
* Set all global interrupts to the boot CPU only. ARE must be
* enabled.
*/
affinity = gic_mpidr_to_affinity(cpu_logical_map(smp_processor_id()));
for (i = 32; i < gic_data.irq_nr; i++)
writeq_relaxed(affinity, base + GICD_IROUTER + i * 8);
}
static int gic_populate_rdist(void)
{
u64 mpidr = cpu_logical_map(smp_processor_id());
u64 typer;
u32 aff;
int i;
/*
* Convert affinity to a 32bit value that can be matched to
* GICR_TYPER bits [63:32].
*/
aff = (MPIDR_AFFINITY_LEVEL(mpidr, 3) << 24 |
MPIDR_AFFINITY_LEVEL(mpidr, 2) << 16 |
MPIDR_AFFINITY_LEVEL(mpidr, 1) << 8 |
MPIDR_AFFINITY_LEVEL(mpidr, 0));
for (i = 0; i < gic_data.redist_regions; i++) {
void __iomem *ptr = gic_data.redist_base[i];
u32 reg;
reg = readl_relaxed(ptr + GICR_PIDR2) & GIC_PIDR2_ARCH_MASK;
if (reg != GIC_PIDR2_ARCH_GICv3 &&
reg != GIC_PIDR2_ARCH_GICv4) { /* We're in trouble... */
pr_warn("No redistributor present @%p\n", ptr);
break;
}
do {
typer = readq_relaxed(ptr + GICR_TYPER);
if ((typer >> 32) == aff) {
gic_data_rdist_rd_base() = ptr;
pr_info("CPU%d: found redistributor %llx @%p\n",
smp_processor_id(),
(unsigned long long)mpidr, ptr);
return 0;
}
if (gic_data.redist_stride) {
ptr += gic_data.redist_stride;
} else {
ptr += SZ_64K * 2; /* Skip RD_base + SGI_base */
if (typer & GICR_TYPER_VLPIS)
ptr += SZ_64K * 2; /* Skip VLPI_base + reserved page */
}
} while (!(typer & GICR_TYPER_LAST));
}
/* We couldn't even deal with ourselves... */
WARN(true, "CPU%d: mpidr %llx has no re-distributor!\n",
smp_processor_id(), (unsigned long long)mpidr);
return -ENODEV;
}
static void gic_cpu_init(void)
{
void __iomem *rbase;
/* Register ourselves with the rest of the world */
if (gic_populate_rdist())
return;
gic_enable_redist();
rbase = gic_data_rdist_sgi_base();
gic_cpu_config(rbase, gic_redist_wait_for_rwp);
/* Enable system registers */
gic_enable_sre();
/* Set priority mask register */
gic_write_pmr(DEFAULT_PMR_VALUE);
/* EOI deactivates interrupt too (mode 0) */
gic_write_ctlr(ICC_CTLR_EL1_EOImode_drop_dir);
/* ... and let's hit the road... */
gic_write_grpen1(1);
}
#ifdef CONFIG_SMP
static int gic_secondary_init(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
gic_cpu_init();
return NOTIFY_OK;
}
/*
* Notifier for enabling the GIC CPU interface. Set an arbitrarily high
* priority because the GIC needs to be up before the ARM generic timers.
*/
static struct notifier_block gic_cpu_notifier = {
.notifier_call = gic_secondary_init,
.priority = 100,
};
static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask,
u64 cluster_id)
{
int cpu = *base_cpu;
u64 mpidr = cpu_logical_map(cpu);
u16 tlist = 0;
while (cpu < nr_cpu_ids) {
/*
* If we ever get a cluster of more than 16 CPUs, just
* scream and skip that CPU.
*/
if (WARN_ON((mpidr & 0xff) >= 16))
goto out;
tlist |= 1 << (mpidr & 0xf);
cpu = cpumask_next(cpu, mask);
if (cpu == nr_cpu_ids)
goto out;
mpidr = cpu_logical_map(cpu);
if (cluster_id != (mpidr & ~0xffUL)) {
cpu--;
goto out;
}
}
out:
*base_cpu = cpu;
return tlist;
}
static void gic_send_sgi(u64 cluster_id, u16 tlist, unsigned int irq)
{
u64 val;
val = (MPIDR_AFFINITY_LEVEL(cluster_id, 3) << 48 |
MPIDR_AFFINITY_LEVEL(cluster_id, 2) << 32 |
irq << 24 |
MPIDR_AFFINITY_LEVEL(cluster_id, 1) << 16 |
tlist);
pr_debug("CPU%d: ICC_SGI1R_EL1 %llx\n", smp_processor_id(), val);
gic_write_sgi1r(val);
}
static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
int cpu;
if (WARN_ON(irq >= 16))
return;
/*
* Ensure that stores to Normal memory are visible to the
* other CPUs before issuing the IPI.
*/
smp_wmb();
for_each_cpu_mask(cpu, *mask) {
u64 cluster_id = cpu_logical_map(cpu) & ~0xffUL;
u16 tlist;
tlist = gic_compute_target_list(&cpu, mask, cluster_id);
gic_send_sgi(cluster_id, tlist, irq);
}
/* Force the above writes to ICC_SGI1R_EL1 to be executed */
isb();
}
static void gic_smp_init(void)
{
set_smp_cross_call(gic_raise_softirq);
register_cpu_notifier(&gic_cpu_notifier);
}
static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
bool force)
{
unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
void __iomem *reg;
int enabled;
u64 val;
if (gic_irq_in_rdist(d))
return -EINVAL;
/* If interrupt was enabled, disable it first */
enabled = gic_peek_irq(d, GICD_ISENABLER);
if (enabled)
gic_mask_irq(d);
reg = gic_dist_base(d) + GICD_IROUTER + (gic_irq(d) * 8);
val = gic_mpidr_to_affinity(cpu_logical_map(cpu));
writeq_relaxed(val, reg);
/*
* If the interrupt was enabled, enabled it again. Otherwise,
* just wait for the distributor to have digested our changes.
*/
if (enabled)
gic_unmask_irq(d);
else
gic_dist_wait_for_rwp();
return IRQ_SET_MASK_OK;
}
#else
#define gic_set_affinity NULL
#define gic_smp_init() do { } while(0)
#endif
static struct irq_chip gic_chip = {
.name = "GICv3",
.irq_mask = gic_mask_irq,
.irq_unmask = gic_unmask_irq,
.irq_eoi = gic_eoi_irq,
.irq_set_type = gic_set_type,
.irq_set_affinity = gic_set_affinity,
};
static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
/* SGIs are private to the core kernel */
if (hw < 16)
return -EPERM;
/* PPIs */
if (hw < 32) {
irq_set_percpu_devid(irq);
irq_set_chip_and_handler(irq, &gic_chip,
handle_percpu_devid_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN);
}
/* SPIs */
if (hw >= 32 && hw < gic_data.irq_nr) {
irq_set_chip_and_handler(irq, &gic_chip,
handle_fasteoi_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
irq_set_chip_data(irq, d->host_data);
return 0;
}
static int gic_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
if (d->of_node != controller)
return -EINVAL;
if (intsize < 3)
return -EINVAL;
switch(intspec[0]) {
case 0: /* SPI */
*out_hwirq = intspec[1] + 32;
break;
case 1: /* PPI */
*out_hwirq = intspec[1] + 16;
break;
default:
return -EINVAL;
}
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
return 0;
}
static const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
.xlate = gic_irq_domain_xlate,
};
static int __init gic_of_init(struct device_node *node, struct device_node *parent)
{
void __iomem *dist_base;
void __iomem **redist_base;
u64 redist_stride;
u32 redist_regions;
u32 reg;
int gic_irqs;
int err;
int i;
dist_base = of_iomap(node, 0);
if (!dist_base) {
pr_err("%s: unable to map gic dist registers\n",
node->full_name);
return -ENXIO;
}
reg = readl_relaxed(dist_base + GICD_PIDR2) & GIC_PIDR2_ARCH_MASK;
if (reg != GIC_PIDR2_ARCH_GICv3 && reg != GIC_PIDR2_ARCH_GICv4) {
pr_err("%s: no distributor detected, giving up\n",
node->full_name);
err = -ENODEV;
goto out_unmap_dist;
}
if (of_property_read_u32(node, "#redistributor-regions", &redist_regions))
redist_regions = 1;
redist_base = kzalloc(sizeof(*redist_base) * redist_regions, GFP_KERNEL);
if (!redist_base) {
err = -ENOMEM;
goto out_unmap_dist;
}
for (i = 0; i < redist_regions; i++) {
redist_base[i] = of_iomap(node, 1 + i);
if (!redist_base[i]) {
pr_err("%s: couldn't map region %d\n",
node->full_name, i);
err = -ENODEV;
goto out_unmap_rdist;
}
}
if (of_property_read_u64(node, "redistributor-stride", &redist_stride))
redist_stride = 0;
gic_data.dist_base = dist_base;
gic_data.redist_base = redist_base;
gic_data.redist_regions = redist_regions;
gic_data.redist_stride = redist_stride;
/*
* Find out how many interrupts are supported.
* The GIC only supports up to 1020 interrupt sources (SGI+PPI+SPI)
*/
gic_irqs = readl_relaxed(gic_data.dist_base + GICD_TYPER) & 0x1f;
gic_irqs = (gic_irqs + 1) * 32;
if (gic_irqs > 1020)
gic_irqs = 1020;
gic_data.irq_nr = gic_irqs;
gic_data.domain = irq_domain_add_tree(node, &gic_irq_domain_ops,
&gic_data);
gic_data.rdist = alloc_percpu(typeof(*gic_data.rdist));
if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdist)) {
err = -ENOMEM;
goto out_free;
}
set_handle_irq(gic_handle_irq);
gic_smp_init();
gic_dist_init();
gic_cpu_init();
return 0;
out_free:
if (gic_data.domain)
irq_domain_remove(gic_data.domain);
free_percpu(gic_data.rdist);
out_unmap_rdist:
for (i = 0; i < redist_regions; i++)
if (redist_base[i])
iounmap(redist_base[i]);
kfree(redist_base);
out_unmap_dist:
iounmap(dist_base);
return err;
}
IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init);
......@@ -46,6 +46,7 @@
#include <asm/exception.h>
#include <asm/smp_plat.h>
#include "irq-gic-common.h"
#include "irqchip.h"
union gic_base {
......@@ -188,12 +189,6 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
{
void __iomem *base = gic_dist_base(d);
unsigned int gicirq = gic_irq(d);
u32 enablemask = 1 << (gicirq % 32);
u32 enableoff = (gicirq / 32) * 4;
u32 confmask = 0x2 << ((gicirq % 16) * 2);
u32 confoff = (gicirq / 16) * 4;
bool enabled = false;
u32 val;
/* Interrupt configuration for SGIs can't be changed */
if (gicirq < 16)
......@@ -207,25 +202,7 @@ static int gic_set_type(struct irq_data *d, unsigned int type)
if (gic_arch_extn.irq_set_type)
gic_arch_extn.irq_set_type(d, type);
val = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
if (type == IRQ_TYPE_LEVEL_HIGH)
val &= ~confmask;
else if (type == IRQ_TYPE_EDGE_RISING)
val |= confmask;
/*
* As recommended by the spec, disable the interrupt before changing
* the configuration
*/
if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
enabled = true;
}
writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
if (enabled)
writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
gic_configure_irq(gicirq, type, base, NULL);
raw_spin_unlock(&irq_controller_lock);
......@@ -386,12 +363,6 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
writel_relaxed(0, base + GIC_DIST_CTRL);
/*
* Set all global interrupts to be level triggered, active low.
*/
for (i = 32; i < gic_irqs; i += 16)
writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
......@@ -401,18 +372,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
for (i = 32; i < gic_irqs; i += 4)
writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 32; i < gic_irqs; i += 32)
writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
gic_dist_config(base, gic_irqs, NULL);
writel_relaxed(1, base + GIC_DIST_CTRL);
}
......@@ -439,18 +399,7 @@ static void gic_cpu_init(struct gic_chip_data *gic)
if (i != cpu)
gic_cpu_map[i] &= ~cpu_mask;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
*/
writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
/*
* Set priority on PPI and SGI interrupts
*/
for (i = 0; i < 32; i += 4)
writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
gic_cpu_config(dist_base, NULL);
writel_relaxed(0xf0, base + GIC_CPU_PRIMASK);
writel_relaxed(1, base + GIC_CPU_CTRL);
......
/*
* Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
* Author: Marc Zyngier <marc.zyngier@arm.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __LINUX_IRQCHIP_ARM_GIC_V3_H
#define __LINUX_IRQCHIP_ARM_GIC_V3_H
/*
* Distributor registers. We assume we're running non-secure, with ARE
* being set. Secure-only and non-ARE registers are not described.
*/
#define GICD_CTLR 0x0000
#define GICD_TYPER 0x0004
#define GICD_IIDR 0x0008
#define GICD_STATUSR 0x0010
#define GICD_SETSPI_NSR 0x0040
#define GICD_CLRSPI_NSR 0x0048
#define GICD_SETSPI_SR 0x0050
#define GICD_CLRSPI_SR 0x0058
#define GICD_SEIR 0x0068
#define GICD_ISENABLER 0x0100
#define GICD_ICENABLER 0x0180
#define GICD_ISPENDR 0x0200
#define GICD_ICPENDR 0x0280
#define GICD_ISACTIVER 0x0300
#define GICD_ICACTIVER 0x0380
#define GICD_IPRIORITYR 0x0400
#define GICD_ICFGR 0x0C00
#define GICD_IROUTER 0x6000
#define GICD_PIDR2 0xFFE8
#define GICD_CTLR_RWP (1U << 31)
#define GICD_CTLR_ARE_NS (1U << 4)
#define GICD_CTLR_ENABLE_G1A (1U << 1)
#define GICD_CTLR_ENABLE_G1 (1U << 0)
#define GICD_IROUTER_SPI_MODE_ONE (0U << 31)
#define GICD_IROUTER_SPI_MODE_ANY (1U << 31)
#define GIC_PIDR2_ARCH_MASK 0xf0
#define GIC_PIDR2_ARCH_GICv3 0x30
#define GIC_PIDR2_ARCH_GICv4 0x40
/*
* Re-Distributor registers, offsets from RD_base
*/
#define GICR_CTLR GICD_CTLR
#define GICR_IIDR 0x0004
#define GICR_TYPER 0x0008
#define GICR_STATUSR GICD_STATUSR
#define GICR_WAKER 0x0014
#define GICR_SETLPIR 0x0040
#define GICR_CLRLPIR 0x0048
#define GICR_SEIR GICD_SEIR
#define GICR_PROPBASER 0x0070
#define GICR_PENDBASER 0x0078
#define GICR_INVLPIR 0x00A0
#define GICR_INVALLR 0x00B0
#define GICR_SYNCR 0x00C0
#define GICR_MOVLPIR 0x0100
#define GICR_MOVALLR 0x0110
#define GICR_PIDR2 GICD_PIDR2
#define GICR_WAKER_ProcessorSleep (1U << 1)
#define GICR_WAKER_ChildrenAsleep (1U << 2)
/*
* Re-Distributor registers, offsets from SGI_base
*/
#define GICR_ISENABLER0 GICD_ISENABLER
#define GICR_ICENABLER0 GICD_ICENABLER
#define GICR_ISPENDR0 GICD_ISPENDR
#define GICR_ICPENDR0 GICD_ICPENDR
#define GICR_ISACTIVER0 GICD_ISACTIVER
#define GICR_ICACTIVER0 GICD_ICACTIVER
#define GICR_IPRIORITYR0 GICD_IPRIORITYR
#define GICR_ICFGR0 GICD_ICFGR
#define GICR_TYPER_VLPIS (1U << 1)
#define GICR_TYPER_LAST (1U << 4)
/*
* CPU interface registers
*/
#define ICC_CTLR_EL1_EOImode_drop_dir (0U << 1)
#define ICC_CTLR_EL1_EOImode_drop (1U << 1)
#define ICC_SRE_EL1_SRE (1U << 0)
/*
* Hypervisor interface registers (SRE only)
*/
#define ICH_LR_VIRTUAL_ID_MASK ((1UL << 32) - 1)
#define ICH_LR_EOI (1UL << 41)
#define ICH_LR_GROUP (1UL << 60)
#define ICH_LR_STATE (3UL << 62)
#define ICH_LR_PENDING_BIT (1UL << 62)
#define ICH_LR_ACTIVE_BIT (1UL << 63)
#define ICH_MISR_EOI (1 << 0)
#define ICH_MISR_U (1 << 1)
#define ICH_HCR_EN (1 << 0)
#define ICH_HCR_UIE (1 << 1)
#define ICH_VMCR_CTLR_SHIFT 0
#define ICH_VMCR_CTLR_MASK (0x21f << ICH_VMCR_CTLR_SHIFT)
#define ICH_VMCR_BPR1_SHIFT 18
#define ICH_VMCR_BPR1_MASK (7 << ICH_VMCR_BPR1_SHIFT)
#define ICH_VMCR_BPR0_SHIFT 21
#define ICH_VMCR_BPR0_MASK (7 << ICH_VMCR_BPR0_SHIFT)
#define ICH_VMCR_PMR_SHIFT 24
#define ICH_VMCR_PMR_MASK (0xffUL << ICH_VMCR_PMR_SHIFT)
#define ICC_EOIR1_EL1 S3_0_C12_C12_1
#define ICC_IAR1_EL1 S3_0_C12_C12_0
#define ICC_SGI1R_EL1 S3_0_C12_C11_5
#define ICC_PMR_EL1 S3_0_C4_C6_0
#define ICC_CTLR_EL1 S3_0_C12_C12_4
#define ICC_SRE_EL1 S3_0_C12_C12_5
#define ICC_GRPEN1_EL1 S3_0_C12_C12_7
#define ICC_IAR1_EL1_SPURIOUS 0x3ff
#define ICC_SRE_EL2 S3_4_C12_C9_5
#define ICC_SRE_EL2_SRE (1 << 0)
#define ICC_SRE_EL2_ENABLE (1 << 3)
/*
* System register definitions
*/
#define ICH_VSEIR_EL2 S3_4_C12_C9_4
#define ICH_HCR_EL2 S3_4_C12_C11_0
#define ICH_VTR_EL2 S3_4_C12_C11_1
#define ICH_MISR_EL2 S3_4_C12_C11_2
#define ICH_EISR_EL2 S3_4_C12_C11_3
#define ICH_ELSR_EL2 S3_4_C12_C11_5
#define ICH_VMCR_EL2 S3_4_C12_C11_7
#define __LR0_EL2(x) S3_4_C12_C12_ ## x
#define __LR8_EL2(x) S3_4_C12_C13_ ## x
#define ICH_LR0_EL2 __LR0_EL2(0)
#define ICH_LR1_EL2 __LR0_EL2(1)
#define ICH_LR2_EL2 __LR0_EL2(2)
#define ICH_LR3_EL2 __LR0_EL2(3)
#define ICH_LR4_EL2 __LR0_EL2(4)
#define ICH_LR5_EL2 __LR0_EL2(5)
#define ICH_LR6_EL2 __LR0_EL2(6)
#define ICH_LR7_EL2 __LR0_EL2(7)
#define ICH_LR8_EL2 __LR8_EL2(0)
#define ICH_LR9_EL2 __LR8_EL2(1)
#define ICH_LR10_EL2 __LR8_EL2(2)
#define ICH_LR11_EL2 __LR8_EL2(3)
#define ICH_LR12_EL2 __LR8_EL2(4)
#define ICH_LR13_EL2 __LR8_EL2(5)
#define ICH_LR14_EL2 __LR8_EL2(6)
#define ICH_LR15_EL2 __LR8_EL2(7)
#define __AP0Rx_EL2(x) S3_4_C12_C8_ ## x
#define ICH_AP0R0_EL2 __AP0Rx_EL2(0)
#define ICH_AP0R1_EL2 __AP0Rx_EL2(1)
#define ICH_AP0R2_EL2 __AP0Rx_EL2(2)
#define ICH_AP0R3_EL2 __AP0Rx_EL2(3)
#define __AP1Rx_EL2(x) S3_4_C12_C9_ ## x
#define ICH_AP1R0_EL2 __AP1Rx_EL2(0)
#define ICH_AP1R1_EL2 __AP1Rx_EL2(1)
#define ICH_AP1R2_EL2 __AP1Rx_EL2(2)
#define ICH_AP1R3_EL2 __AP1Rx_EL2(3)
#ifndef __ASSEMBLY__
#include <linux/stringify.h>
static inline void gic_write_eoir(u64 irq)
{
asm volatile("msr " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" (irq));
isb();
}
#endif
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册