提交 ec67624d 编写于 作者: L Lopez Cruz, Misael 提交者: Mark Brown

ASoC: Add GPIO support for jack reporting interface

Add GPIO support to jack reporting framework in ASoC using gpiolib calls.
The gpio support exports two new functions: snd_soc_jack_add_gpios and
snd_soc_jack_free_gpios.

Client drivers using gpio feature must pass an array of jack_gpio pins
belonging to a specific jack to the snd_soc_jack_add_gpios function. The
framework will request the gpios, set the data direction and request irq.
The framework will update power status of related jack_pins when an event on
the gpio pins comes according to the reporting bits defined for each gpio.

All gpio resources allocated when adding jack_gpio pins can be released
using snd_soc_jack_free_gpios function.
Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 5f2a9384
......@@ -16,6 +16,8 @@
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/control.h>
......@@ -168,6 +170,9 @@ struct soc_enum;
struct snd_soc_ac97_ops;
struct snd_soc_jack;
struct snd_soc_jack_pin;
#ifdef CONFIG_GPIOLIB
struct snd_soc_jack_gpio;
#endif
typedef int (*hw_write_t)(void *,const char* ,int);
typedef int (*hw_read_t)(void *,char* ,int);
......@@ -194,6 +199,12 @@ int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type,
void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_pin *pins);
#ifdef CONFIG_GPIOLIB
int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios);
void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios);
#endif
/* codec IO */
#define snd_soc_read(codec, reg) codec->read(codec, reg)
......@@ -264,6 +275,27 @@ struct snd_soc_jack_pin {
bool invert;
};
/**
* struct snd_soc_jack_gpio - Describes a gpio pin for jack detection
*
* @gpio: gpio number
* @name: gpio name
* @report: value to report when jack detected
* @invert: report presence in low state
* @debouce_time: debouce time in ms
*/
#ifdef CONFIG_GPIOLIB
struct snd_soc_jack_gpio {
unsigned int gpio;
const char *name;
int report;
int invert;
int debounce_time;
struct snd_soc_jack *jack;
struct work_struct work;
};
#endif
struct snd_soc_jack {
struct snd_jack *jack;
struct snd_soc_card *card;
......
......@@ -14,6 +14,10 @@
#include <sound/jack.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
/**
* snd_soc_jack_new - Create a new jack
......@@ -136,3 +140,128 @@ int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins);
#ifdef CONFIG_GPIOLIB
/* gpio detect */
void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio)
{
struct snd_soc_jack *jack = gpio->jack;
int enable;
int report;
if (gpio->debounce_time > 0)
mdelay(gpio->debounce_time);
enable = gpio_get_value(gpio->gpio);
if (gpio->invert)
enable = !enable;
if (enable)
report = gpio->report;
else
report = 0;
snd_soc_jack_report(jack, report, gpio->report);
}
/* irq handler for gpio pin */
static irqreturn_t gpio_handler(int irq, void *data)
{
struct snd_soc_jack_gpio *gpio = data;
schedule_work(&gpio->work);
return IRQ_HANDLED;
}
/* gpio work */
static void gpio_work(struct work_struct *work)
{
struct snd_soc_jack_gpio *gpio;
gpio = container_of(work, struct snd_soc_jack_gpio, work);
snd_soc_jack_gpio_detect(gpio);
}
/**
* snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack
*
* @jack: ASoC jack
* @count: number of pins
* @gpios: array of gpio pins
*
* This function will request gpio, set data direction and request irq
* for each gpio in the array.
*/
int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
int i, ret;
for (i = 0; i < count; i++) {
if (!gpio_is_valid(gpios[i].gpio)) {
printk(KERN_ERR "Invalid gpio %d\n",
gpios[i].gpio);
ret = -EINVAL;
goto undo;
}
if (!gpios[i].name) {
printk(KERN_ERR "No name for gpio %d\n",
gpios[i].gpio);
ret = -EINVAL;
goto undo;
}
ret = gpio_request(gpios[i].gpio, gpios[i].name);
if (ret)
goto undo;
ret = gpio_direction_input(gpios[i].gpio);
if (ret)
goto err;
ret = request_irq(gpio_to_irq(gpios[i].gpio),
gpio_handler,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
jack->card->dev->driver->name,
&gpios[i]);
if (ret)
goto err;
INIT_WORK(&gpios[i].work, gpio_work);
gpios[i].jack = jack;
}
return 0;
err:
gpio_free(gpios[i].gpio);
undo:
snd_soc_jack_free_gpios(jack, i, gpios);
return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios);
/**
* snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack
*
* @jack: ASoC jack
* @count: number of pins
* @gpios: array of gpio pins
*
* Release gpio and irq resources for gpio pins associated with an ASoC jack.
*/
void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
int i;
for (i = 0; i < count; i++) {
free_irq(gpio_to_irq(gpios[i].gpio), &gpios[i]);
gpio_free(gpios[i].gpio);
gpios[i].jack = NULL;
}
}
EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios);
#endif /* CONFIG_GPIOLIB */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册