提交 ec669696 编写于 作者: K Krzysztof Hałasa

IXP4xx: move AVILA platform macros to the platform code.

Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
上级 9bf4d676
...@@ -22,12 +22,26 @@ ...@@ -22,12 +22,26 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <asm/mach/pci.h> #include <asm/mach/pci.h>
#include <asm/irq.h> #include <asm/irq.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#define AVILA_PCI_MAX_DEV 4
#define LOFT_PCI_MAX_DEV 6
#define AVILA_PCI_IRQ_LINES 4
/* PCI controller GPIO to IRQ pin mappings */
#define AVILA_PCI_INTA_PIN 11
#define AVILA_PCI_INTB_PIN 10
#define AVILA_PCI_INTC_PIN 9
#define AVILA_PCI_INTD_PIN 8
#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
void __init avila_pci_preinit(void) void __init avila_pci_preinit(void)
{ {
set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW); set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
......
...@@ -19,7 +19,6 @@ ...@@ -19,7 +19,6 @@
#include <linux/serial_8250.h> #include <linux/serial_8250.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/i2c-gpio.h> #include <linux/i2c-gpio.h>
#include <asm/types.h> #include <asm/types.h>
#include <asm/setup.h> #include <asm/setup.h>
#include <asm/memory.h> #include <asm/memory.h>
...@@ -29,6 +28,9 @@ ...@@ -29,6 +28,9 @@
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#define AVILA_SDA_PIN 7
#define AVILA_SCL_PIN 6
static struct flash_platform_data avila_flash_data = { static struct flash_platform_data avila_flash_data = {
.map_name = "cfi_probe", .map_name = "cfi_probe",
.width = 2, .width = 2,
......
/*
* arch/arm/mach-ixp4xx/include/mach/avila.h
*
* Gateworks Avila platform specific definitions
*
* Author: Michael-Luke Jones <mlj28@cam.ac.uk>
*
* Based on ixdp425.h
* Author: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2004 (c) MontaVista, Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H__
#error "Do not include this directly, instead #include <mach/hardware.h>"
#endif
#define AVILA_SDA_PIN 7
#define AVILA_SCL_PIN 6
/*
* AVILA PCI IRQs
*/
#define AVILA_PCI_MAX_DEV 4
#define LOFT_PCI_MAX_DEV 6
#define AVILA_PCI_IRQ_LINES 4
/* PCI controller GPIO to IRQ pin mappings */
#define AVILA_PCI_INTA_PIN 11
#define AVILA_PCI_INTB_PIN 10
#define AVILA_PCI_INTC_PIN 9
#define AVILA_PCI_INTD_PIN 8
...@@ -44,7 +44,6 @@ ...@@ -44,7 +44,6 @@
#include "platform.h" #include "platform.h"
/* Platform specific details */ /* Platform specific details */
#include "avila.h"
#include "coyote.h" #include "coyote.h"
#include "prpmc1100.h" #include "prpmc1100.h"
#include "nslu2.h" #include "nslu2.h"
......
...@@ -70,15 +70,6 @@ ...@@ -70,15 +70,6 @@
#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) #define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU)
/*
* Gateworks Avila board IRQs
*/
#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
/* /*
* PrPMC1100 Board IRQs * PrPMC1100 Board IRQs
*/ */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册