提交 ec20a63a 编写于 作者: F Fugang Duan 提交者: David S. Miller

net: fec: don't dump RX FIFO register when not available

Commit db65f35f ("net: fec: add support of ethtool get_regs") introduce
ethool "--register-dump" interface to dump all FEC registers.

But not all silicon implementations of the Freescale FEC hardware module
have the FRBR (FIFO Receive Bound Register) and FRSR (FIFO Receive Start
Register) register, so we should not be trying to dump them on those that
don't.

To fix it we create a quirk flag, FEC_QUIRK_HAS_RFREG, and check it before
dump those RX FIFO registers.
Signed-off-by: NFugang Duan <fugang.duan@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 fbe1222c
......@@ -452,6 +452,10 @@ struct bufdesc_ex {
* initialisation.
*/
#define FEC_QUIRK_MIB_CLEAR (1 << 15)
/* Only i.MX25/i.MX27/i.MX28 controller supports FRBR,FRSR registers,
* those FIFO receive registers are resolved in other platforms.
*/
#define FEC_QUIRK_HAS_FRREG (1 << 16)
struct bufdesc_prop {
int qid;
......
......@@ -91,14 +91,16 @@ static struct platform_device_id fec_devtype[] = {
.driver_data = 0,
}, {
.name = "imx25-fec",
.driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR,
.driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
FEC_QUIRK_HAS_FRREG,
}, {
.name = "imx27-fec",
.driver_data = FEC_QUIRK_MIB_CLEAR,
.driver_data = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
}, {
.name = "imx28-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC,
FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
FEC_QUIRK_HAS_FRREG,
}, {
.name = "imx6q-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
......@@ -2164,7 +2166,13 @@ static void fec_enet_get_regs(struct net_device *ndev,
memset(buf, 0, regs->len);
for (i = 0; i < ARRAY_SIZE(fec_enet_register_offset); i++) {
off = fec_enet_register_offset[i] / 4;
off = fec_enet_register_offset[i];
if ((off == FEC_R_BOUND || off == FEC_R_FSTART) &&
!(fep->quirks & FEC_QUIRK_HAS_FRREG))
continue;
off >>= 2;
buf[off] = readl(&theregs[off]);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册