提交 ec03e6a8 编写于 作者: M Mugunthan V N 提交者: David S. Miller

drivers: net: ethernet: davince_mdio: device tree implementation

device tree implementation for davinci mdio driver
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 aae06bf5
TI SoC Davinci MDIO Controller Device Tree Bindings
---------------------------------------------------
Required properties:
- compatible : Should be "ti,davinci_mdio"
- reg : physical base address and size of the davinci mdio
registers map
- bus_freq : Mdio Bus frequency
Optional properties:
- ti,hwmods : Must be "davinci_mdio"
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
Future plan is to migrate hwmod data base contents into device tree
blob so that, all the required data will be used from device tree dts
file.
Examples:
mdio: davinci_mdio@4A101000 {
compatible = "ti,cpsw";
reg = <0x4A101000 0x1000>;
bus_freq = <1000000>;
};
(or)
mdio: davinci_mdio@4A101000 {
compatible = "ti,cpsw";
ti,hwmods = "davinci_mdio";
bus_freq = <1000000>;
};
......@@ -36,6 +36,8 @@
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <linux/davinci_emac.h>
#include <linux/of.h>
#include <linux/of_device.h>
/*
* This timeout definition is a worst-case ultra defensive measure against
......@@ -289,6 +291,25 @@ static int davinci_mdio_write(struct mii_bus *bus, int phy_id,
return 0;
}
static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
u32 prop;
if (!node)
return -EINVAL;
if (of_property_read_u32(node, "bus_freq", &prop)) {
pr_err("Missing bus_freq property in the DT.\n");
return -EINVAL;
}
data->bus_freq = prop;
return 0;
}
static int __devinit davinci_mdio_probe(struct platform_device *pdev)
{
struct mdio_platform_data *pdata = pdev->dev.platform_data;
......@@ -304,8 +325,6 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev)
return -ENOMEM;
}
data->pdata = pdata ? (*pdata) : default_pdata;
data->bus = mdiobus_alloc();
if (!data->bus) {
dev_err(dev, "failed to alloc mii bus\n");
......@@ -313,14 +332,22 @@ static int __devinit davinci_mdio_probe(struct platform_device *pdev)
goto bail_out;
}
if (dev->of_node) {
if (davinci_mdio_probe_dt(&data->pdata, pdev))
data->pdata = default_pdata;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s", pdev->name);
} else {
data->pdata = pdata ? (*pdata) : default_pdata;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
pdev->name, pdev->id);
}
data->bus->name = dev_name(dev);
data->bus->read = davinci_mdio_read,
data->bus->write = davinci_mdio_write,
data->bus->reset = davinci_mdio_reset,
data->bus->parent = dev;
data->bus->priv = data;
snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
pdev->name, pdev->id);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
......@@ -454,11 +481,17 @@ static const struct dev_pm_ops davinci_mdio_pm_ops = {
.resume = davinci_mdio_resume,
};
static const struct of_device_id davinci_mdio_of_mtable[] = {
{ .compatible = "ti,davinci_mdio", },
{ /* sentinel */ },
};
static struct platform_driver davinci_mdio_driver = {
.driver = {
.name = "davinci_mdio",
.owner = THIS_MODULE,
.pm = &davinci_mdio_pm_ops,
.of_match_table = of_match_ptr(davinci_mdio_of_mtable),
},
.probe = davinci_mdio_probe,
.remove = __devexit_p(davinci_mdio_remove),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册