ARM: ux500: make irqs.h local to platform

With the PRCMU out of the way, nothing outside of mach-ux500
uses mach/irqs.h any more, so we can make it a local header file,
including the two sub-headers.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/board-mop500-audio.c

@@ -11,7 +11,7 @@
 #include <linux/platform_data/dma-ste-dma40.h>
 
 #include <mach/devices.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 
 #include "ste-dma40-db8500.h"

arch/arm/mach-ux500/board-mop500-u8500uib.c

@@ -12,7 +12,7 @@
 #include <linux/mfd/tc3589x.h>
 #include <linux/input/matrix_keypad.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "board-mop500.h"
 

arch/arm/mach-ux500/board-mop500.c

@@ -43,7 +43,7 @@
 
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"

arch/arm/mach-ux500/board-mop500.h

@@ -8,7 +8,7 @@
 #define __BOARD_MOP500_H
 
 /* For NOMADIK_NR_GPIO */
-#include <mach/irqs.h>
+#include "irqs.h"
 #include <linux/platform_data/asoc-ux500-msp.h>
 #include <linux/amba/mmci.h>
 

arch/arm/mach-ux500/cpu-db8500.c

@@ -30,7 +30,7 @@
 
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"

arch/arm/mach-ux500/devices-common.c

@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "devices-common.h"
 

arch/arm/mach-ux500/devices-db8500.c

@@ -16,7 +16,7 @@
 #include <linux/mfd/dbx500-prcmu.h>
 
 #include <mach/setup.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "db8500-regs.h"
 #include "devices-db8500.h"

arch/arm/mach-ux500/devices-db8500.h

@@ -9,7 +9,7 @@
 #define __DEVICES_DB8500_H
 
 #include <linux/platform_data/usb-musb-ux500.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 #include "db8500-regs.h"
 #include "devices-common.h"
 

arch/arm/mach-ux500/include/mach/irqs.h → arch/arm/mach-ux500/irqs.h

@@ -34,14 +34,14 @@
 /* This will be overridden by SoC-specific irq headers */
 #define IRQ_SOC_END		IRQ_SOC_START
 
-#include <mach/irqs-db8500.h>
+#include "irqs-db8500.h"
 
 #define IRQ_BOARD_START		IRQ_SOC_END
 /* This will be overridden by board-specific irq headers */
 #define IRQ_BOARD_END		IRQ_BOARD_START
 
 #ifdef CONFIG_MACH_MOP500
-#include <mach/irqs-board-mop500.h>
+#include "irqs-board-mop500.h"
 #endif
 
 #define UX500_NR_IRQS		IRQ_BOARD_END

arch/arm/mach-ux500/timer.c

@@ -14,7 +14,7 @@
 #include <asm/smp_twd.h>
 
 #include <mach/setup.h>
-#include <mach/irqs.h>
+#include "irqs.h"
 
 #include "db8500-regs.h"
 #include "id.h"