Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 eb250942 编写于 作者: M Michael Krufky 提交者： Mauro Carvalho Chehab
浏览文件
操作

V4L/DVB (8296): sms1xxx: always show error messages 

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 f14d56a9
隐藏空白更改
内联 并排
Showing with 37 addition and 43 deletion
drivers/media/dvb/siano/smscoreapi.c
浏览文件 @ eb250942
......@@ -777,7 +777,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
PDEBUG("set device mode to %d", mode);
if (coredev->device_flags & SMS_DEVICE_FAMILY2) {
if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_RAW_TUNER) {
sms_info("invalid mode specified %d", mode);
sms_err("invalid mode specified %d", mode);
return -EINVAL;
}
......@@ -786,7 +786,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
if (!(coredev->device_flags & SMS_DEVICE_NOT_READY)) {
rc = smscore_detect_mode(coredev);
if (rc < 0) {
sms_info("mode detect failed %d", rc);
sms_err("mode detect failed %d", rc);
return rc;
}
}
......@@ -801,8 +801,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
rc = smscore_load_firmware_from_file(
coredev, smscore_fw_lkup[mode][type], NULL);
if (rc < 0) {
sms_info("load firmware "
"failed %d", rc);
sms_err("load firmware failed %d", rc);
return rc;
}
} else
......@@ -826,13 +825,13 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
kfree(buffer);
} else {
sms_info("Could not allocate buffer for "
"init device message.");
sms_err("Could not allocate buffer for "
"init device message.");
rc = -ENOMEM;
}
} else {
if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) {
sms_info("invalid mode specified %d", mode);
sms_err("invalid mode specified %d", mode);
return -EINVAL;
}
......@@ -852,7 +851,7 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
}
if (rc != 0)
sms_info("return error code %d.", rc);
sms_err("return error code %d.", rc);
return rc;
}
......@@ -1211,12 +1210,12 @@ int smscore_map_common_buffer(struct smscore_device_t *coredev,
if (!(vma->vm_flags & (VM_READ | VM_SHARED)) ||
(vma->vm_flags & VM_WRITE)) {
sms_info("invalid vm flags");
sms_err("invalid vm flags");
return -EINVAL;
}
if ((end - start) != size) {
sms_info("invalid size %d expected %d",
sms_err("invalid size %d expected %d",
(int)(end - start), (int) size);
return -EINVAL;
}
......@@ -1224,7 +1223,7 @@ int smscore_map_common_buffer(struct smscore_device_t *coredev,
if (remap_pfn_range(vma, start,
coredev->common_buffer_phys >> PAGE_SHIFT,
size, pgprot_noncached(vma->vm_page_prot))) {
sms_info("remap_page_range failed");
sms_err("remap_page_range failed");
return -EAGAIN;
}
......
drivers/media/dvb/siano/smsdvb.c
浏览文件 @ eb250942
......@@ -329,7 +329,7 @@ int smsdvb_hotplug(struct smscore_device_t *coredev,
client = kzalloc(sizeof(struct smsdvb_client_t), GFP_KERNEL);
if (!client) {
sms_info("kmalloc() failed");
sms_err("kmalloc() failed");
return -ENOMEM;
}
......@@ -385,7 +385,7 @@ int smsdvb_hotplug(struct smscore_device_t *coredev,
rc = smscore_register_client(coredev, &params, &client->smsclient);
if (rc < 0) {
sms_info("smscore_register_client() failed %d", rc);
sms_err("smscore_register_client() failed %d", rc);
goto client_error;
}
......
drivers/media/dvb/siano/smsusb.c
浏览文件 @ eb250942
......@@ -60,8 +60,8 @@ void smsusb_onresponse(struct urb *urb)
struct smsusb_device_t *dev = surb->dev;
if (urb->status < 0) {
sms_info("error, urb status %d, %d bytes",
urb->status, urb->actual_length);
sms_err("error, urb status %d, %d bytes",
urb->status, urb->actual_length);
return;
}
......@@ -81,12 +81,12 @@ void smsusb_onresponse(struct urb *urb)
/* sanity check */
if (((int) phdr->msgLength +
surb->cb->offset) > urb->actual_length) {
sms_info("invalid response "
"msglen %d offset %d "
"size %d",
phdr->msgLength,
surb->cb->offset,
urb->actual_length);
sms_err("invalid response "
"msglen %d offset %d "
"size %d",
phdr->msgLength,
surb->cb->offset,
urb->actual_length);
goto exit_and_resubmit;
}
......@@ -100,9 +100,9 @@ void smsusb_onresponse(struct urb *urb)
smscore_onresponse(dev->coredev, surb->cb);
surb->cb = NULL;
} else {
sms_info("invalid response "
"msglen %d actual %d",
phdr->msgLength, urb->actual_length);
sms_err("invalid response "
"msglen %d actual %d",
phdr->msgLength, urb->actual_length);
}
}
......@@ -115,8 +115,7 @@ int smsusb_submit_urb(struct smsusb_device_t *dev, struct smsusb_urb_t *surb)
if (!surb->cb) {
surb->cb = smscore_getbuffer(dev->coredev);
if (!surb->cb) {
sms_info("smscore_getbuffer(...) "
"returned NULL");
sms_err("smscore_getbuffer(...) returned NULL");
return -ENOMEM;
}
}
......@@ -157,8 +156,7 @@ int smsusb_start_streaming(struct smsusb_device_t *dev)
for (i = 0; i < MAX_URBS; i++) {
rc = smsusb_submit_urb(dev, &dev->surbs[i]);
if (rc < 0) {
sms_info("smsusb_submit_urb(...) "
"failed");
sms_err("smsusb_submit_urb(...) failed");
smsusb_stop_streaming(dev);
break;
}
......@@ -191,14 +189,14 @@ int smsusb1_load_firmware(struct usb_device *udev, int id)
int rc, dummy;
if (id < DEVICE_MODE_DVBT || id > DEVICE_MODE_DVBT_BDA) {
sms_info("invalid firmware id specified %d", id);
sms_err("invalid firmware id specified %d", id);
return -EINVAL;
}
rc = request_firmware(&fw, smsusb1_fw_lkup[id], &udev->dev);
if (rc < 0) {
sms_info("failed to open \"%s\" mode %d",
smsusb1_fw_lkup[id], id);
sms_err("failed to open \"%s\" mode %d",
smsusb1_fw_lkup[id], id);
return rc;
}
......@@ -213,7 +211,7 @@ int smsusb1_load_firmware(struct usb_device *udev, int id)
kfree(fw_buffer);
} else {
sms_info("failed to allocate firmware buffer");
sms_err("failed to allocate firmware buffer");
rc = -ENOMEM;
}
......@@ -250,7 +248,7 @@ int smsusb1_setmode(void *context, int mode)
sizeof(struct SmsMsgHdr_ST), 0 };
if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) {
sms_info("invalid firmware id specified %d", mode);
sms_err("invalid firmware id specified %d", mode);
return -EINVAL;
}
......@@ -287,8 +285,7 @@ int smsusb_init_device(struct usb_interface *intf, int board_id)
/* create device object */
dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
if (!dev) {
sms_info("kzalloc(sizeof(struct smsusb_device_t) "
"failed");
sms_err("kzalloc(sizeof(struct smsusb_device_t) failed");
return -ENOMEM;
}
......@@ -346,8 +343,7 @@ int smsusb_init_device(struct usb_interface *intf, int board_id)
/* register in smscore */
rc = smscore_register_device(&params, &dev->coredev);
if (rc < 0) {
sms_info("smscore_register_device(...) failed, "
"rc %d", rc);
sms_err("smscore_register_device(...) failed, rc %d", rc);
smsusb_term_device(intf);
return rc;
}
......@@ -363,14 +359,14 @@ int smsusb_init_device(struct usb_interface *intf, int board_id)
sms_info("smsusb_start_streaming(...).");
rc = smsusb_start_streaming(dev);
if (rc < 0) {
sms_info("smsusb_start_streaming(...) failed");
sms_err("smsusb_start_streaming(...) failed");
smsusb_term_device(intf);
return rc;
}
rc = smscore_start_device(dev->coredev);
if (rc < 0) {
sms_info("smscore_start_device(...) failed");
sms_err("smscore_start_device(...) failed");
smsusb_term_device(intf);
return rc;
}
......@@ -393,8 +389,7 @@ int smsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
rc = usb_set_interface(
udev, intf->cur_altsetting->desc.bInterfaceNumber, 0);
if (rc < 0) {
sms_info("usb_set_interface failed, "
"rc %d", rc);
sms_err("usb_set_interface failed, rc %d", rc);
return rc;
}
}
......@@ -409,7 +404,7 @@ int smsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
if ((udev->actconfig->desc.bNumInterfaces == 2) &&
(intf->cur_altsetting->desc.bInterfaceNumber == 0)) {
sms_info("rom interface 0 is not used");
sms_err("rom interface 0 is not used");
return -ENODEV;
}
......@@ -442,7 +437,7 @@ int smsusb_register(void)
{
int rc = usb_register(&smsusb_driver);
if (rc)
sms_info("usb_register failed. Error number %d", rc);
sms_err("usb_register failed. Error number %d", rc);
sms_debug("");
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或