ARM: dts: kirkwood: Fixup pcie DT warnings

PCIe has a range property, so the unit name should contain an address.
Make use of the label to enable individual PCIe busses. Also, fixup
the synology dtsi file which added a label pcie2 rather than using the
existing pcie1 label.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm/boot/dts/kirkwood-6192.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-6281.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-6282.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-98dx4122.dtsi

 / {
 	mbus {
-		pciec: pcie-controller {
+		pciec: pcie-controller@82000000 {
 			compatible = "marvell,kirkwood-pcie";
 			status = "disabled";
 			device_type = "pci";

arch/arm/boot/dts/kirkwood-b3.dts

@@ -33,17 +33,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Wifi model has Atheros chipset on pcie port */
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -199,3 +188,11 @@
 	};
 };
 
+/* Wifi model has Atheros chipset on pcie port */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-db-88f6281.dts

@@ -17,14 +17,12 @@
 / {
 	model = "Marvell DB-88F6281-BP Development Board";
 	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
+&pciec {
+        status = "okay";
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
+&pcie0 {
+	status = "okay";
 };

arch/arm/boot/dts/kirkwood-db-88f6282.dts

@@ -17,18 +17,16 @@
 / {
 	model = "Marvell DB-88F6282-BP Development Board";
 	compatible = "marvell,db-88f6282-bp", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
+&pciec {
+        status = "okay";
+};
 
-			pcie@1,0 {
-				status = "okay";
-			};
+&pcie0 {
+	status = "okay";
+};
 
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
+&pcie1 {
+	status = "okay";
 };

arch/arm/boot/dts/kirkwood-dir665.dts

@@ -25,16 +25,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 =< &pmx_led_usb
@@ -276,3 +266,11 @@
 &rtc {
 	status = "disabled";
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-ds111.dts

@@ -40,6 +40,6 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds112.dts

@@ -44,6 +44,10 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds212.dts

@@ -43,6 +43,6 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds411.dts

@@ -48,6 +48,10 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-ds411slim.dts

@@ -44,6 +44,6 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -19,16 +19,6 @@
 		linux,initrd-end   = <0x4800000>;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_reset: pmx-button-reset {
@@ -194,3 +184,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-km_common.dtsi

@@ -4,16 +4,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
@@ -46,3 +36,11 @@
 	status = "okay";
 	chip-delay = <25>;
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-laplug.dts

@@ -27,15 +27,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		serial@12000 {
 			status = "okay";
@@ -169,3 +160,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-linkstation.dtsi

@@ -49,15 +49,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_power_hdd0: pmx-power-hdd0 {
@@ -200,3 +191,11 @@
 		};
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-mplcec4.dts

@@ -17,16 +17,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_led_health: pmx-led-health {
@@ -215,3 +205,11 @@
 		phy-handle = <&ethphy1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -31,16 +31,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-        };
-
 	ocp@f1000000 {
 		pin-controller@10000 {
 			pmx_usb_led: pmx-usb-led {
@@ -179,3 +169,11 @@
 		duplex = <1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-nas2big.dts

@@ -28,16 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		rtc@10300 {
 			/* The on-chip RTC is not powered (no supercap). */
@@ -141,3 +131,11 @@
 		reg = <0x9100000 0x6f00000>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts

@@ -28,16 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -251,3 +241,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts

@@ -28,18 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to NEC uPD720200 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_button_power: pmx-button-power {
@@ -265,3 +253,12 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+/* Connected to NEC uPD720200 USB 3.0 controller */
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-nsa310.dts

@@ -15,16 +15,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_unknown>;
@@ -138,3 +128,11 @@
 		};
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-nsa320.dts

@@ -27,16 +27,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
@@ -222,3 +212,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-nsa325.dts

@@ -28,16 +28,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
@@ -236,3 +226,10 @@
 	};
 };
 
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi

@@ -4,16 +4,6 @@
 / {
 	model = "ZyXEL NSA310";
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 
@@ -157,3 +147,11 @@
 		reg = <0x5040000 0x2fc0000>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-openrd.dtsi

@@ -25,16 +25,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>;
@@ -125,3 +115,7 @@
 		reg = <0x0600000 0x1FA00000>;
 	};
 };
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-rd88f6192.dts

@@ -29,16 +29,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_usb_power>;
@@ -108,4 +98,12 @@
         ethernet0-port@0 {
                 phy-handle = <&ethphy0>;
         };
-};
\ No newline at end of file
+};
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-rd88f6281.dtsi

@@ -25,16 +25,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-names = "default";
@@ -134,3 +124,11 @@
 		duplex = <1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-rs212.dts

@@ -44,6 +44,10 @@
 	status = "okay";
 };
 
-&pcie2 {
+&pciec {
+        status = "okay";
+};
+
+&pcie1 {
 	status = "okay";
 };

arch/arm/boot/dts/kirkwood-synology.dtsi

@@ -10,20 +10,6 @@
  */
 
 / {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-
-			pcie2: pcie@2,0 {
-				status = "disabled";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pmx_alarmled_12: pmx-alarmled-12 {
@@ -861,3 +847,11 @@
 		phy-handle = <&ethphy1>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-t5325.dts

@@ -30,16 +30,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_i2s &pmx_sysrst>;
@@ -229,3 +219,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-ts219-6282.dts

@@ -5,16 +5,6 @@
 #include "kirkwood-ts219.dtsi"
 
 / {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 
@@ -63,3 +53,5 @@
 };
 
 &ethphy0 { reg = <0>; };
+
+&pcie1 { status = "okay"; };

arch/arm/boot/dts/kirkwood-ts219.dtsi

@@ -12,16 +12,6 @@
 		stdout-path = &uart0;
 	};
 
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
-	};
-
 	ocp@f1000000 {
 		i2c@11000 {
 			status = "okay";
@@ -105,3 +95,11 @@
 		phy-handle = <&ethphy0>;
 	};
 };
+
+&pciec {
+        status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};

arch/arm/boot/dts/kirkwood-ts419-6282.dts

@@ -16,17 +16,8 @@
 #include "kirkwood-ts219.dtsi"
 #include "kirkwood-ts419.dtsi"
 
-/ {
-	mbus {
-		pcie-controller {
-			status = "okay";
-
-			pcie@2,0 {
-				status = "okay";
-			};
-		};
-	};
-};
-
 &ethphy0 { reg = <0>; };
 &ethphy1 { reg = <1>; };
+
+&pciec { status = "okay"; };
+&pcie1 { status = "okay"; };