提交 eaae4b3a 编写于 作者: S Steven Cole 提交者: Greg KH

[PATCH] PCI: Spelling fixes for drivers/pci.

Here are some spelling corrections for drivers/pci.

CONTROLER -> CONTROLLER
Regisetr -> Register
harware -> hardware
inital -> initial
Initilize -> Initialize
funtion -> function
funciton -> function
occured -> occurred
Signed-off-by: NSteven Cole <elenstev@mesatop.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 3aa8c4fe
......@@ -196,7 +196,7 @@ struct ebda_hpc_bus {
/********************************************************************
* THREE TYPE OF HOT PLUG CONTROLER *
* THREE TYPE OF HOT PLUG CONTROLLER *
********************************************************************/
struct isa_ctlr_access {
......
......@@ -64,7 +64,7 @@ static int to_debug = FALSE;
#define WPG_I2C_OR 0x2000 // I2C OR operation
//----------------------------------------------------------------------------
// Command set for I2C Master Operation Setup Regisetr
// Command set for I2C Master Operation Setup Register
//----------------------------------------------------------------------------
#define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
#define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
......@@ -835,7 +835,7 @@ static void poll_hpc (void)
if (ibmphp_shutdown)
break;
/* try to get the lock to do some kind of harware access */
/* try to get the lock to do some kind of hardware access */
down (&semOperations);
switch (poll_state) {
......@@ -906,7 +906,7 @@ static void poll_hpc (void)
poll_state = POLL_LATCH_REGISTER;
break;
}
/* give up the harware semaphore */
/* give up the hardware semaphore */
up (&semOperations);
/* sleep for a short time just for good measure */
msleep(100);
......
......@@ -150,7 +150,7 @@ struct hotplug_slot_info {
* @name: the name of the slot being registered. This string must
* be unique amoung slots registered on this system.
* @ops: pointer to the &struct hotplug_slot_ops to be used for this slot
* @info: pointer to the &struct hotplug_slot_info for the inital values for
* @info: pointer to the &struct hotplug_slot_info for the initial values for
* this slot.
* @release: called during pci_hp_deregister to free memory allocated in a
* hotplug_slot structure.
......
......@@ -297,7 +297,7 @@ static int __init init_slots(void)
hotplug_slot->ops = &skel_hotplug_slot_ops;
/*
* Initilize the slot info structure with some known
* Initialize the slot info structure with some known
* good values.
*/
info->power_status = get_power_status(slot);
......
......@@ -522,7 +522,7 @@ void pci_scan_msi_device(struct pci_dev *dev)
* msi_capability_init - configure device's MSI capability structure
* @dev: pointer to the pci_dev data structure of MSI device function
*
* Setup the MSI capability structure of device funtion with a single
* Setup the MSI capability structure of device function with a single
* MSI vector, regardless of device function is capable of handling
* multiple messages. A return of zero indicates the successful setup
* of an entry zero with the new MSI vector or non-zero for otherwise.
......@@ -599,7 +599,7 @@ static int msi_capability_init(struct pci_dev *dev)
* msix_capability_init - configure device's MSI-X capability
* @dev: pointer to the pci_dev data structure of MSI-X device function
*
* Setup the MSI-X capability structure of device funtion with a
* Setup the MSI-X capability structure of device function with a
* single MSI-X vector. A return of zero indicates the successful setup of
* requested MSI-X entries with allocated vectors or non-zero for otherwise.
**/
......@@ -1074,7 +1074,7 @@ void pci_disable_msix(struct pci_dev* dev)
* msi_remove_pci_irq_vectors - reclaim MSI(X) vectors to unused state
* @dev: pointer to the pci_dev data structure of MSI(X) device function
*
* Being called during hotplug remove, from which the device funciton
* Being called during hotplug remove, from which the device function
* is hot-removed. All previous assigned MSI/MSI-X vectors, if
* allocated for this device function, are reclaimed to unused state,
* which may be used later on.
......
......@@ -381,7 +381,7 @@ pci_populate_driver_dir(struct pci_driver *drv)
*
* Adds the driver structure to the list of registered drivers.
* Returns a negative value on error, otherwise 0.
* If no error occured, the driver remains registered even if
* If no error occurred, the driver remains registered even if
* no device was claimed during registration.
*/
int pci_register_driver(struct pci_driver *drv)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册