powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/

This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/
directory. The new location suggested by Kumar Gala: as the driver is
83xx specific it's placed into arch/powerpc/platforms/83xx/.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/83xx/Makefile

@@ -3,6 +3,7 @@
 #
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o

arch/powerpc/platforms/Kconfig

@@ -323,4 +323,15 @@ config SIMPLE_GPIO
 	  chip-selects, Ethernet/USB PHY's power and various other small
 	  on-board peripherals.
 
+config MCU_MPC8349EMITX
+	tristate "MPC8349E-mITX MCU driver"
+	depends on I2C && PPC_83xx
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here to enable soft power-off functionality on the Freescale
+	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+	  also register MCU GPIOs with the generic GPIO API, so you'll able
+	  to use MCU pins as GPIOs.
+
 endmenu

drivers/i2c/chips/Kconfig

@@ -139,15 +139,4 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
-config MCU_MPC8349EMITX
-	tristate "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here to enable soft power-off functionality on the Freescale
-	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-	  also register MCU GPIOs with the generic GPIO API, so you'll able
-	  to use MCU pins as GPIOs.
-
 endmenu

drivers/i2c/chips/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG