Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 e9b72e43 编写于 作者: L Lennert Buytenhek 提交者： Russell King
浏览文件
操作

[ARM] 3064/1: start using ixp2000_reg_wrb 

Patch from Lennert Buytenhek

Switch the users of ixp2000_reg_write that depend on writes being
flushed out of the write buffer by the time that function returns
over to ixp2000_reg_wrb.

When using XCB=101, writes to the same functional unit are still
guaranteed to complete in order, so we only need to protect against:
- reordering of writes to different functional units
- masking an interrupt and then reenabling the IRQ bit in CPSR
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 69a85761
隐藏空白更改
内联 并排
Showing with 33 addition and 32 deletion
arch/arm/mach-ixp2000/core.c
浏览文件 @ e9b72e43
......@@ -62,7 +62,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg
ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC);
ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC);
ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR);
ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC);
}
void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
......@@ -71,7 +71,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC);
ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC);
ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR);
ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC);
spin_unlock_irqrestore(&ixp2000_slowport_lock,
ixp2000_slowport_irq_flags);
......@@ -145,7 +145,7 @@ void __init ixp2000_map_io(void)
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
/* Set slowport to 8-bit mode. */
ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1);
ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1);
}
......@@ -209,7 +209,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
write_seqlock(&xtime_lock);
/* clear timer 1 */
ixp2000_reg_write(IXP2000_T1_CLR, 1);
ixp2000_reg_wrb(IXP2000_T1_CLR, 1);
while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
timer_tick(regs);
......@@ -252,12 +252,12 @@ void __init ixp2000_init_time(unsigned long tick_rate)
ixp2000_reg_write(IXP2000_T4_CLR, 0);
ixp2000_reg_write(IXP2000_T4_CLD, -1);
ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7));
missing_jiffy_timer_csr = IXP2000_T4_CSR;
} else {
ixp2000_reg_write(IXP2000_T2_CLR, 0);
ixp2000_reg_write(IXP2000_T2_CLD, -1);
ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7));
ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7));
missing_jiffy_timer_csr = IXP2000_T2_CSR;
}
next_jiffy_time = 0xffffffff;
......@@ -279,7 +279,7 @@ static void update_gpio_int_csrs(void)
ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge);
ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge);
ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low);
ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high);
}
void gpio_line_config(int line, int direction)
......@@ -297,9 +297,9 @@ void gpio_line_config(int line, int direction)
GPIO_IRQ_level_high &= ~(1 << line);
update_gpio_int_csrs();
ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line);
ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line);
} else if (direction == GPIO_IN) {
ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line);
ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line);
}
local_irq_restore(flags);
}
......@@ -365,12 +365,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq)
ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0)));
}
static void ixp2000_GPIO_irq_mask(unsigned int irq)
{
ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0)));
}
static void ixp2000_GPIO_irq_unmask(unsigned int irq)
......@@ -389,9 +389,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq)
{
unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE;
if (irq == IRQ_IXP2000_PCIA)
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26)));
else if (irq == IRQ_IXP2000_PCIB)
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27)));
}
static void ixp2000_pci_irq_unmask(unsigned int irq)
......@@ -411,7 +411,7 @@ static struct irqchip ixp2000_pci_irq_chip = {
static void ixp2000_irq_mask(unsigned int irq)
{
ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq));
}
static void ixp2000_irq_unmask(unsigned int irq)
......@@ -443,7 +443,7 @@ void __init ixp2000_init_irq(void)
ixp2000_reg_write(IXP2000_GPIO_INCR, -1);
/* clear PCI interrupt sources */
ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0);
/*
* Certain bits in the IRQ status register of the
......
arch/arm/mach-ixp2000/ixdp2x00.c
浏览文件 @ e9b72e43
......@@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq)
dummy = *board_irq_mask;
dummy |= IXP2000_BOARD_IRQ_MASK(irq);
ixp2000_reg_write(board_irq_mask, dummy);
ixp2000_reg_wrb(board_irq_mask, dummy);
#ifdef CONFIG_ARCH_IXDP2400
if (machine_is_ixdp2400())
......@@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq)
dummy = *board_irq_mask;
dummy &= ~IXP2000_BOARD_IRQ_MASK(irq);
ixp2000_reg_write(board_irq_mask, dummy);
ixp2000_reg_wrb(board_irq_mask, dummy);
if (machine_is_ixdp2400())
ixp2000_release_slowport(&old_cfg);
......
arch/arm/mach-ixp2000/ixdp2x01.c
浏览文件 @ e9b72e43
......@@ -51,7 +51,7 @@
*************************************************************************/
static void ixdp2x01_irq_mask(unsigned int irq)
{
ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG,
ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG,
IXP2000_BOARD_IRQ_MASK(irq));
}
......@@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void)
/* Mask all interrupts from CPLD, disable simulation */
ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff);
ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0);
ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0);
for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) {
if (irq & valid_irq_mask) {
......@@ -316,7 +316,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = {
static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs)
{
ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN));
return (ofs & IXDP2X01_FLASH_WINDOW_MASK);
}
......@@ -363,7 +363,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = {
static void __init ixdp2x01_init_machine(void)
{
ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG,
(IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN));
ixdp2x01_flash_data.nr_banks =
......
arch/arm/mach-ixp2000/pci.c
浏览文件 @ e9b72e43
......@@ -148,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re
local_irq_save(flags);
temp = *(IXP2000_PCI_CONTROL);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
}
temp = *(IXP2000_PCI_CMDSTAT);
......@@ -178,8 +178,8 @@ clear_master_aborts(void)
local_irq_save(flags);
temp = *(IXP2000_PCI_CONTROL);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_write(IXP2000_PCI_CONTROL, temp);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
}
temp = *(IXP2000_PCI_CMDSTAT);
......
include/asm-arm/arch-ixp2000/system.h
浏览文件 @ e9b72e43
......@@ -26,23 +26,24 @@ static inline void arch_reset(char mode)
* RedBoot bank.
*/
if (machine_is_ixdp2401()) {
*IXDP2X01_CPLD_FLASH_REG = ((0 >> IXDP2X01_FLASH_WINDOW_BITS)
| IXDP2X01_CPLD_FLASH_INTERN);
*IXDP2X01_CPLD_RESET_REG = 0xffffffff;
ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
((0 >> IXDP2X01_FLASH_WINDOW_BITS)
| IXDP2X01_CPLD_FLASH_INTERN));
ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
}
/*
* On IXDP2801 we need to write this magic sequence to the CPLD
* to cause a complete reset of the CPU and all external devices
* and moves the flash bank register back to 0.
* and move the flash bank register back to 0.
*/
if (machine_is_ixdp2801()) {
unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
*IXDP2X01_CPLD_RESET_REG = reset_reg;
mb();
*IXDP2X01_CPLD_RESET_REG = 0x80000000;
ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
}
*IXP2000_RESET0 = RSTALL;
ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或