提交 e99a187b 编写于 作者: R Ray Jui 提交者: Bjorn Helgaas

PCI: iproc: Add outbound mapping support

Certain SoCs require the PCIe outbound mapping to be configured in
software.  Add support for those chips.

[jonmason: Use %pap format when printing size_t to avoid warnings in 32-bit
build.]
[arnd: Use div64_u64() instead of "%" to avoid __aeabi_uldivmod link error
in 32-bit build.]
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NJon Mason <jonmason@broadcom.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
上级 8d0afa1a
......@@ -54,6 +54,33 @@ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
return -ENOMEM;
}
if (of_property_read_bool(np, "brcm,pcie-ob")) {
u32 val;
ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset",
&val);
if (ret) {
dev_err(pcie->dev,
"missing brcm,pcie-ob-axi-offset property\n");
return ret;
}
pcie->ob.axi_offset = val;
ret = of_property_read_u32(np, "brcm,pcie-ob-window-size",
&val);
if (ret) {
dev_err(pcie->dev,
"missing brcm,pcie-ob-window-size property\n");
return ret;
}
pcie->ob.window_size = (resource_size_t)val * SZ_1M;
if (of_property_read_bool(np, "brcm,pcie-ob-oarr-size"))
pcie->ob.set_oarr_size = true;
pcie->need_ob_cfg = true;
}
/* PHY use is optional */
pcie->phy = devm_phy_get(&pdev->dev, "pcie-phy");
if (IS_ERR(pcie->phy)) {
......
......@@ -66,6 +66,18 @@
#define PCIE_DL_ACTIVE_SHIFT 2
#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT)
#define OARR_VALID_SHIFT 0
#define OARR_VALID BIT(OARR_VALID_SHIFT)
#define OARR_SIZE_CFG_SHIFT 1
#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
#define OARR_LO(window) (0xd20 + (window) * 8)
#define OARR_HI(window) (0xd24 + (window) * 8)
#define OMAP_LO(window) (0xd40 + (window) * 8)
#define OMAP_HI(window) (0xd44 + (window) * 8)
#define MAX_NUM_OB_WINDOWS 2
static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
{
struct iproc_pcie *pcie;
......@@ -212,6 +224,101 @@ static void iproc_pcie_enable(struct iproc_pcie *pcie)
writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
}
/**
* Some iProc SoCs require the SW to configure the outbound address mapping
*
* Outbound address translation:
*
* iproc_pcie_address = axi_address - axi_offset
* OARR = iproc_pcie_address
* OMAP = pci_addr
*
* axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
*/
static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
u64 pci_addr, resource_size_t size)
{
struct iproc_pcie_ob *ob = &pcie->ob;
unsigned i;
u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS;
u64 remainder;
if (size > max_size) {
dev_err(pcie->dev,
"res size 0x%pap exceeds max supported size 0x%llx\n",
&size, max_size);
return -EINVAL;
}
div64_u64_rem(size, ob->window_size, &remainder);
if (remainder) {
dev_err(pcie->dev,
"res size %pap needs to be multiple of window size %pap\n",
&size, &ob->window_size);
return -EINVAL;
}
if (axi_addr < ob->axi_offset) {
dev_err(pcie->dev,
"axi address %pap less than offset %pap\n",
&axi_addr, &ob->axi_offset);
return -EINVAL;
}
/*
* Translate the AXI address to the internal address used by the iProc
* PCIe core before programming the OARR
*/
axi_addr -= ob->axi_offset;
for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
writel(lower_32_bits(axi_addr) | OARR_VALID |
(ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i));
writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i));
writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i));
writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i));
size -= ob->window_size;
if (size == 0)
break;
axi_addr += ob->window_size;
pci_addr += ob->window_size;
}
return 0;
}
static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
struct list_head *resources)
{
struct resource_entry *window;
int ret;
resource_list_for_each_entry(window, resources) {
struct resource *res = window->res;
u64 res_type = resource_type(res);
switch (res_type) {
case IORESOURCE_IO:
case IORESOURCE_BUS:
break;
case IORESOURCE_MEM:
ret = iproc_pcie_setup_ob(pcie, res->start,
res->start - window->offset,
resource_size(res));
if (ret)
return ret;
break;
default:
dev_err(pcie->dev, "invalid resource %pR\n", res);
return -EINVAL;
}
}
return 0;
}
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
int ret;
......@@ -235,6 +342,14 @@ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
iproc_pcie_reset(pcie);
if (pcie->need_ob_cfg) {
ret = iproc_pcie_map_ranges(pcie, res);
if (ret) {
dev_err(pcie->dev, "map failed\n");
goto err_power_off_phy;
}
}
#ifdef CONFIG_ARM
pcie->sysdata.private_data = pcie;
sysdata = &pcie->sysdata;
......
......@@ -14,6 +14,19 @@
#ifndef _PCIE_IPROC_H
#define _PCIE_IPROC_H
/**
* iProc PCIe outbound mapping
* @set_oarr_size: indicates the OARR size bit needs to be set
* @axi_offset: offset from the AXI address to the internal address used by
* the iProc PCIe core
* @window_size: outbound window size
*/
struct iproc_pcie_ob {
bool set_oarr_size;
resource_size_t axi_offset;
resource_size_t window_size;
};
/**
* iProc PCIe device
* @dev: pointer to device data structure
......@@ -23,6 +36,8 @@
* @phy: optional PHY device that controls the Serdes
* @irqs: interrupt IDs
* @map_irq: function callback to map interrupts
* @need_ob_cfg: indidates SW needs to configure the outbound mapping window
* @ob: outbound mapping parameters
*/
struct iproc_pcie {
struct device *dev;
......@@ -33,6 +48,8 @@ struct iproc_pcie {
struct pci_bus *root_bus;
struct phy *phy;
int (*map_irq)(const struct pci_dev *, u8, u8);
bool need_ob_cfg;
struct iproc_pcie_ob ob;
};
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册