提交 e8975581 编写于 作者: J Johannes Berg 提交者: John W. Linville

mac80211: introduce hw config change flags

This makes mac80211 notify the driver which configuration
actually changed, e.g. channel etc.

No driver changes, this is just plumbing, driver authors are
expected to act on this if they want to.

Also remove the HW CONFIG debug printk, it's incorrect, often
we configure something else.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 0f4ac38b
......@@ -1314,9 +1314,10 @@ static int adm8211_set_ssid(struct ieee80211_hw *dev, u8 *ssid, size_t ssid_len)
return 0;
}
static int adm8211_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
{
struct adm8211_priv *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
if (channel != priv->channel) {
......
......@@ -219,8 +219,7 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
static void ath5k_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
static int ath5k_config(struct ieee80211_hw *hw,
struct ieee80211_conf *conf);
static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
static int ath5k_config_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf);
......@@ -2780,10 +2779,10 @@ ath5k_remove_interface(struct ieee80211_hw *hw,
* TODO: Phy disable/diversity etc
*/
static int
ath5k_config(struct ieee80211_hw *hw,
struct ieee80211_conf *conf)
ath5k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath5k_softc *sc = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
sc->bintval = conf->beacon_int;
sc->power_level = conf->power_level;
......
......@@ -1230,11 +1230,11 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
__func__, error);
}
static int ath9k_config(struct ieee80211_hw *hw,
struct ieee80211_conf *conf)
static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
{
struct ath_softc *sc = hw->priv;
struct ieee80211_channel *curchan = hw->conf.channel;
struct ieee80211_conf *conf = &hw->conf;
int pos;
DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n",
......
......@@ -3320,11 +3320,12 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
return err;
}
static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
static int b43_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev;
struct b43_phy *phy;
struct ieee80211_conf *conf = &hw->conf;
unsigned long flags;
int antenna;
int err = 0;
......
......@@ -2557,11 +2557,12 @@ static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
}
static int b43legacy_op_dev_config(struct ieee80211_hw *hw,
struct ieee80211_conf *conf)
u32 changed)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
struct b43legacy_phy *phy;
struct ieee80211_conf *conf = &hw->conf;
unsigned long flags;
unsigned int new_phymode = 0xFFFF;
int antenna_tx;
......
......@@ -2734,10 +2734,11 @@ static int iwl4965_mac_add_interface(struct ieee80211_hw *hw,
* be set inappropriately and the driver currently sets the hardware up to
* use it whenever needed.
*/
static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
static int iwl4965_mac_config(struct ieee80211_hw *hw, u32 changed)
{
struct iwl_priv *priv = hw->priv;
const struct iwl_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
unsigned long flags;
int ret = 0;
u16 channel;
......
......@@ -6415,7 +6415,7 @@ static void iwl3945_bg_abort_scan(struct work_struct *work)
mutex_unlock(&priv->mutex);
}
static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
static void iwl3945_bg_scan_completed(struct work_struct *work)
{
......@@ -6428,7 +6428,7 @@ static void iwl3945_bg_scan_completed(struct work_struct *work)
return;
if (test_bit(STATUS_CONF_PENDING, &priv->status))
iwl3945_mac_config(priv->hw, ieee80211_get_hw_conf(priv->hw));
iwl3945_mac_config(priv->hw, 0);
ieee80211_scan_completed(priv->hw);
......@@ -6616,10 +6616,11 @@ static int iwl3945_mac_add_interface(struct ieee80211_hw *hw,
* be set inappropriately and the driver currently sets the hardware up to
* use it whenever needed.
*/
static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed)
{
struct iwl3945_priv *priv = hw->priv;
const struct iwl3945_channel_info *ch_info;
struct ieee80211_conf *conf = &hw->conf;
unsigned long flags;
int ret = 0;
......
......@@ -354,9 +354,11 @@ static void lbtf_op_remove_interface(struct ieee80211_hw *hw,
priv->vif = NULL;
}
static int lbtf_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct lbtf_private *priv = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
if (conf->channel->center_freq != priv->cur_freq) {
priv->cur_freq = conf->channel->center_freq;
lbtf_set_channel(priv, conf->channel->hw_value);
......
......@@ -359,10 +359,10 @@ static void mac80211_hwsim_beacon(unsigned long arg)
}
static int mac80211_hwsim_config(struct ieee80211_hw *hw,
struct ieee80211_conf *conf)
static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
{
struct mac80211_hwsim_data *data = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
printk(KERN_DEBUG "%s:%s (freq=%d radio_enabled=%d beacon_int=%d)\n",
wiphy_name(hw->wiphy), __func__,
......
......@@ -1192,10 +1192,11 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
p54_set_filter(dev, 0, NULL);
}
static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
static int p54_config(struct ieee80211_hw *dev, u32 changed)
{
int ret;
struct p54_common *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
mutex_lock(&priv->conf_mutex);
priv->rx_antenna = 2; /* automatic */
......
......@@ -997,7 +997,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
int rt2x00mac_config_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf);
......
......@@ -1245,7 +1245,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
/*
* Reconfigure device.
*/
retval = rt2x00mac_config(rt2x00dev->hw, &rt2x00dev->hw->conf);
retval = rt2x00mac_config(rt2x00dev->hw, ~0);
if (retval)
goto exit;
......
......@@ -335,9 +335,10 @@ void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
int radio_on;
int status;
......
......@@ -692,9 +692,10 @@ static void rtl8180_remove_interface(struct ieee80211_hw *dev,
priv->vif = NULL;
}
static int rtl8180_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
{
struct rtl8180_priv *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
priv->rf->set_chan(dev, conf);
......
......@@ -873,9 +873,10 @@ static void rtl8187_remove_interface(struct ieee80211_hw *dev,
mutex_unlock(&priv->conf_mutex);
}
static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
static int rtl8187_config(struct ieee80211_hw *dev, u32 changed)
{
struct rtl8187_priv *priv = dev->priv;
struct ieee80211_conf *conf = &dev->conf;
u32 reg;
mutex_lock(&priv->conf_mutex);
......
......@@ -743,9 +743,11 @@ static void zd_op_remove_interface(struct ieee80211_hw *hw,
zd_write_mac_addr(&mac->chip, NULL);
}
static int zd_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
static int zd_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct zd_mac *mac = zd_hw_mac(hw);
struct ieee80211_conf *conf = &hw->conf;
return zd_chip_set_channel(&mac->chip, conf->channel->hw_value);
}
......
......@@ -463,13 +463,33 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
}
#define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
/**
* enum ieee80211_conf_changed - denotes which configuration changed
*
* @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed
* @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed
* @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed
* @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed
* @IEEE80211_CONF_CHANGE_PS: the PS flag changed
* @IEEE80211_CONF_CHANGE_POWER: the TX power changed
* @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
*/
enum ieee80211_conf_changed {
IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0),
IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1),
IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2),
IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3),
IEEE80211_CONF_CHANGE_PS = BIT(4),
IEEE80211_CONF_CHANGE_POWER = BIT(5),
IEEE80211_CONF_CHANGE_CHANNEL = BIT(6),
};
/**
* struct ieee80211_conf - configuration of the device
*
* This struct indicates how the driver shall configure the hardware.
*
* @radio_enabled: when zero, driver is required to switch off the radio.
* TODO make a flag
* @beacon_int: beacon interval (TODO make interface config)
* @listen_interval: listen interval in units of beacon interval
* @flags: configuration flags defined above
......@@ -479,13 +499,13 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
* @channel: the channel to tune to
*/
struct ieee80211_conf {
int radio_enabled;
int beacon_int;
u16 listen_interval;
u32 flags;
int power_level;
u16 listen_interval;
bool radio_enabled;
struct ieee80211_channel *channel;
struct ieee80211_sta_ht_cap ht_cap;
......@@ -1214,7 +1234,7 @@ struct ieee80211_ops {
struct ieee80211_if_init_conf *conf);
void (*remove_interface)(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
int (*config)(struct ieee80211_hw *hw, struct ieee80211_conf *conf);
int (*config)(struct ieee80211_hw *hw, u32 changed);
int (*config_interface)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_if_conf *conf);
......
......@@ -394,7 +394,8 @@ static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
*/
if (params->interval) {
sdata->local->hw.conf.beacon_int = params->interval;
ieee80211_hw_config(sdata->local);
ieee80211_hw_config(sdata->local,
IEEE80211_CONF_CHANGE_BEACON_INTERVAL);
/*
* We updated some parameter so if below bails out
* it's not an error.
......
......@@ -875,7 +875,7 @@ static inline int ieee80211_bssid_match(const u8 *raddr, const u8 *addr)
}
int ieee80211_hw_config(struct ieee80211_local *local);
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed);
int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed);
void ieee80211_tx_set_protected(struct ieee80211_tx_data *tx);
void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
......
......@@ -65,7 +65,7 @@ static int ieee80211_open(struct net_device *dev)
struct ieee80211_if_init_conf conf;
u32 changed = 0;
int res;
bool need_hw_reconfig = 0;
u32 hw_reconf_flags = 0;
u8 null_addr[ETH_ALEN] = {0};
/* fail early if user set an invalid address */
......@@ -152,7 +152,8 @@ static int ieee80211_open(struct net_device *dev)
res = local->ops->start(local_to_hw(local));
if (res)
goto err_del_bss;
need_hw_reconfig = 1;
/* we're brought up, everything changes */
hw_reconf_flags = ~0;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
......@@ -198,8 +199,10 @@ static int ieee80211_open(struct net_device *dev)
/* must be before the call to ieee80211_configure_filter */
local->monitors++;
if (local->monitors == 1)
if (local->monitors == 1) {
local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
}
if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
local->fif_fcsfail++;
......@@ -279,8 +282,8 @@ static int ieee80211_open(struct net_device *dev)
atomic_inc(&local->iff_promiscs);
local->open_count++;
if (need_hw_reconfig) {
ieee80211_hw_config(local);
if (hw_reconf_flags) {
ieee80211_hw_config(local, hw_reconf_flags);
/*
* set default queue parameters so drivers don't
* need to initialise the hardware if the hardware
......@@ -322,6 +325,7 @@ static int ieee80211_stop(struct net_device *dev)
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_init_conf conf;
struct sta_info *sta;
u32 hw_reconf_flags = 0;
/*
* Stop TX on this interface first.
......@@ -405,8 +409,10 @@ static int ieee80211_stop(struct net_device *dev)
}
local->monitors--;
if (local->monitors == 0)
if (local->monitors == 0) {
local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
hw_reconf_flags |= IEEE80211_CONF_CHANGE_RADIOTAP;
}
if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
local->fif_fcsfail--;
......@@ -504,8 +510,15 @@ static int ieee80211_stop(struct net_device *dev)
tasklet_disable(&local->tx_pending_tasklet);
tasklet_disable(&local->tasklet);
/* no reconfiguring after stop! */
hw_reconf_flags = 0;
}
/* do after stop to avoid reconfiguring when we stop anyway */
if (hw_reconf_flags)
ieee80211_hw_config(local, hw_reconf_flags);
return 0;
}
......
......@@ -197,31 +197,34 @@ int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
&sdata->vif, &conf);
}
int ieee80211_hw_config(struct ieee80211_local *local)
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
struct ieee80211_channel *chan;
int ret = 0;
int power;
if (local->sw_scanning)
chan = local->scan_channel;
else
chan = local->oper_channel;
local->hw.conf.channel = chan;
if (chan != local->hw.conf.channel) {
local->hw.conf.channel = chan;
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
if (!local->hw.conf.power_level)
local->hw.conf.power_level = chan->max_power;
power = chan->max_power;
else
local->hw.conf.power_level = min(chan->max_power,
local->hw.conf.power_level);
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
wiphy_name(local->hw.wiphy), chan->center_freq);
#endif
power = min(chan->max_power, local->hw.conf.power_level);
if (local->hw.conf.power_level != power) {
changed |= IEEE80211_CONF_CHANGE_POWER;
local->hw.conf.power_level = power;
}
if (local->open_count) {
ret = local->ops->config(local_to_hw(local), &local->hw.conf);
if (changed && local->open_count) {
ret = local->ops->config(local_to_hw(local), changed);
/*
* HW reconfiguration should never fail, the driver has told
* us what it can support so it should live up to that promise.
......@@ -672,7 +675,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
local->short_retry_limit = 7;
local->long_retry_limit = 4;
local->hw.conf.radio_enabled = 1;
local->hw.conf.radio_enabled = true;
INIT_LIST_HEAD(&local->interfaces);
......
......@@ -448,12 +448,17 @@ void ieee80211_scan_completed(struct ieee80211_hw *hw)
if (local->hw_scanning) {
local->hw_scanning = false;
ieee80211_hw_config(local);
/*
* Somebody might have requested channel change during scan
* that we won't have acted upon, try now. ieee80211_hw_config
* will set the flag based on actual changes.
*/
ieee80211_hw_config(local, 0);
goto done;
}
local->sw_scanning = false;
ieee80211_hw_config(local);
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
netif_tx_lock_bh(local->mdev);
netif_addr_lock(local->mdev);
......@@ -540,7 +545,8 @@ void ieee80211_scan_work(struct work_struct *work)
if (!skip) {
local->scan_channel = chan;
if (ieee80211_hw_config(local))
if (ieee80211_hw_config(local,
IEEE80211_CONF_CHANGE_CHANNEL))
skip = 1;
}
......
......@@ -645,7 +645,8 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
if (local->sw_scanning || local->hw_scanning)
ret = 0;
else
ret = ieee80211_hw_config(local);
ret = ieee80211_hw_config(
local, IEEE80211_CONF_CHANGE_CHANNEL);
rate_control_clear(local);
}
......
......@@ -656,7 +656,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
union iwreq_data *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
bool need_reconfig = 0;
u32 reconf_flags = 0;
int new_power_level;
if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
......@@ -680,17 +680,17 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
if (local->hw.conf.power_level != new_power_level) {
local->hw.conf.power_level = new_power_level;
need_reconfig = 1;
reconf_flags |= IEEE80211_CONF_CHANGE_POWER;
}
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
need_reconfig = 1;
reconf_flags |= IEEE80211_CONF_CHANGE_RADIO_ENABLED;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
if (need_reconfig)
ieee80211_hw_config(local);
if (reconf_flags)
ieee80211_hw_config(local, reconf_flags);
return 0;
}
......@@ -976,7 +976,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
if (wrq->disabled) {
conf->flags &= ~IEEE80211_CONF_PS;
return ieee80211_hw_config(local);
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
switch (wrq->flags & IW_POWER_MODE) {
......@@ -989,7 +989,7 @@ static int ieee80211_ioctl_siwpower(struct net_device *dev,
return -EINVAL;
}
return ieee80211_hw_config(local);
return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
static int ieee80211_ioctl_giwpower(struct net_device *dev,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册