提交 e80deee0 编写于 作者: A Andrzej Hajda 提交者: Krzysztof Kozlowski

arm64: dts: exynos: Add DECON_TV node to Exynos5433

DECON_TV is 2nd display controller on Exynos5433, used in HDMI path
or 2nd DSI path.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NJavier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Tested-by: NHoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
上级 df5d5a93
......@@ -751,6 +751,29 @@
};
};
decon_tv: decon@13880000 {
compatible = "samsung,exynos5433-decon-tv";
reg = <0x13880000 0x20b8>;
clocks = <&cmu_disp CLK_PCLK_DECON_TV>,
<&cmu_disp CLK_ACLK_DECON_TV>,
<&cmu_disp CLK_ACLK_SMMU_TV0X>,
<&cmu_disp CLK_ACLK_XIU_TV0X>,
<&cmu_disp CLK_PCLK_SMMU_TV0X>,
<&cmu_disp CLK_SCLK_DECON_TV_VCLK>,
<&cmu_disp CLK_SCLK_DECON_TV_ECLK>;
clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x",
"aclk_xiu_decon0x", "pclk_smmu_decon0x",
"sclk_decon_vclk", "sclk_decon_eclk";
samsung,disp-sysreg = <&syscon_disp>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
iommus = <&sysmmu_tv0x>, <&sysmmu_tv1x>;
iommu-names = "m0", "m1";
};
dsi: dsi@13900000 {
compatible = "samsung,exynos5433-mipi-dsi";
reg = <0x13900000 0xC0>;
......@@ -912,6 +935,26 @@
#iommu-cells = <0>;
};
sysmmu_tv0x: sysmmu@13a20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a20000 0x1000>;
interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk";
clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>,
<&cmu_disp CLK_ACLK_SMMU_TV0X>;
#iommu-cells = <0>;
};
sysmmu_tv1x: sysmmu@13a30000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13a30000 0x1000>;
interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "pclk", "aclk";
clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>,
<&cmu_disp CLK_ACLK_SMMU_TV1X>;
#iommu-cells = <0>;
};
sysmmu_gscl0: sysmmu@13c80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13C80000 0x1000>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册