提交 e7ab5f1c 编写于 作者: J John W. Linville

Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
......@@ -188,7 +188,7 @@ config BT_MRVL
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
Marvell Bluetooth devices, such as 8688/8787.
Marvell Bluetooth devices, such as 8688/8787/8797.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
......@@ -201,8 +201,8 @@ config BT_MRVL_SDIO
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
devices with SDIO interface. Currently SD8688/SD8787 chipsets are
supported.
devices with SDIO interface. Currently SD8688/SD8787/SD8797
chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
into the kernel or say M to compile it as module.
......
......@@ -65,7 +65,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
.io_port_1 = 0x01,
.io_port_2 = 0x02,
};
static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
.cfg = 0x00,
.host_int_mask = 0x02,
.host_intstatus = 0x03,
......@@ -92,7 +92,14 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
.reg = &btmrvl_reg_8787,
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.helper = NULL,
.firmware = "mrvl/sd8797_uapsta.bin",
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
......@@ -103,6 +110,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
/* Marvell SD8797 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
{ } /* Terminating entry */
};
......@@ -1076,3 +1086,4 @@ MODULE_LICENSE("GPL v2");
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
......@@ -777,9 +777,8 @@ static int btusb_send_frame(struct sk_buff *skb)
usb_mark_last_busy(data->udev);
}
usb_free_urb(urb);
done:
usb_free_urb(urb);
return err;
}
......
......@@ -286,7 +286,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start)
ath_start_ani(common);
}
if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) {
if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) {
struct ath_hw_antcomb_conf div_ant_conf;
u8 lna_conf;
......
......@@ -569,7 +569,7 @@ static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
}
case ERFSLEEP:{
if (ppsc->rfpwr_state == ERFOFF)
break;
return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
ring = &pcipriv->dev.tx_ring[queue_id];
......
......@@ -548,7 +548,7 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
break;
case ERFSLEEP:
if (ppsc->rfpwr_state == ERFOFF)
break;
return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
ring = &pcipriv->dev.tx_ring[queue_id];
......
......@@ -3374,7 +3374,7 @@ bool rtl92d_phy_set_rf_power_state(struct ieee80211_hw *hw,
break;
case ERFSLEEP:
if (ppsc->rfpwr_state == ERFOFF)
break;
return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
......
......@@ -602,7 +602,7 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
}
case ERFSLEEP:
if (ppsc->rfpwr_state == ERFOFF)
break;
return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
......
......@@ -517,10 +517,14 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
{
ssb_pcicore_fix_sprom_core_index(pc);
struct ssb_device *pdev = pc->dev;
struct ssb_bus *bus = pdev->bus;
if (bus->bustype == SSB_BUSTYPE_PCI)
ssb_pcicore_fix_sprom_core_index(pc);
/* Disable PCI interrupts. */
ssb_write32(pc->dev, SSB_INTVEC, 0);
ssb_write32(pdev, SSB_INTVEC, 0);
/* Additional PCIe always once-executed workarounds */
if (pc->dev->id.coreid == SSB_DEV_PCIE) {
......
......@@ -79,17 +79,12 @@ static struct bnep_session *__bnep_get_session(u8 *dst)
static void __bnep_link_session(struct bnep_session *s)
{
/* It's safe to call __module_get() here because sessions are added
by the socket layer which has to hold the reference to this module.
*/
__module_get(THIS_MODULE);
list_add(&s->list, &bnep_session_list);
}
static void __bnep_unlink_session(struct bnep_session *s)
{
list_del(&s->list);
module_put(THIS_MODULE);
}
static int bnep_send(struct bnep_session *s, void *data, size_t len)
......@@ -530,6 +525,7 @@ static int bnep_session(void *arg)
up_write(&bnep_session_sem);
free_netdev(dev);
module_put_and_exit(0);
return 0;
}
......@@ -616,9 +612,11 @@ int bnep_add_connection(struct bnep_connadd_req *req, struct socket *sock)
__bnep_link_session(s);
__module_get(THIS_MODULE);
s->task = kthread_run(bnep_session, s, "kbnepd %s", dev->name);
if (IS_ERR(s->task)) {
/* Session thread start failed, gotta cleanup. */
module_put(THIS_MODULE);
unregister_netdev(dev);
__bnep_unlink_session(s);
err = PTR_ERR(s->task);
......
......@@ -67,14 +67,12 @@ static struct cmtp_session *__cmtp_get_session(bdaddr_t *bdaddr)
static void __cmtp_link_session(struct cmtp_session *session)
{
__module_get(THIS_MODULE);
list_add(&session->list, &cmtp_session_list);
}
static void __cmtp_unlink_session(struct cmtp_session *session)
{
list_del(&session->list);
module_put(THIS_MODULE);
}
static void __cmtp_copy_session(struct cmtp_session *session, struct cmtp_conninfo *ci)
......@@ -327,6 +325,7 @@ static int cmtp_session(void *arg)
up_write(&cmtp_session_sem);
kfree(session);
module_put_and_exit(0);
return 0;
}
......@@ -376,9 +375,11 @@ int cmtp_add_connection(struct cmtp_connadd_req *req, struct socket *sock)
__cmtp_link_session(session);
__module_get(THIS_MODULE);
session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
session->num);
if (IS_ERR(session->task)) {
module_put(THIS_MODULE);
err = PTR_ERR(session->task);
goto unlink;
}
......
......@@ -545,7 +545,7 @@ static void hci_setup(struct hci_dev *hdev)
{
hci_setup_event_mask(hdev);
if (hdev->lmp_ver > 1)
if (hdev->hci_ver > 1)
hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
if (hdev->features[6] & LMP_SIMPLE_PAIR) {
......
......@@ -303,6 +303,38 @@ ieee80211_wake_queue_agg(struct ieee80211_local *local, int tid)
__release(agg_queue);
}
/*
* splice packets from the STA's pending to the local pending,
* requires a call to ieee80211_agg_splice_finish later
*/
static void __acquires(agg_queue)
ieee80211_agg_splice_packets(struct ieee80211_local *local,
struct tid_ampdu_tx *tid_tx, u16 tid)
{
int queue = ieee80211_ac_from_tid(tid);
unsigned long flags;
ieee80211_stop_queue_agg(local, tid);
if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
" from the pending queue\n", tid))
return;
if (!skb_queue_empty(&tid_tx->pending)) {
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
/* copy over remaining packets */
skb_queue_splice_tail_init(&tid_tx->pending,
&local->pending[queue]);
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
}
}
static void __releases(agg_queue)
ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
{
ieee80211_wake_queue_agg(local, tid);
}
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
{
struct tid_ampdu_tx *tid_tx;
......@@ -314,19 +346,17 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
/*
* While we're asking the driver about the aggregation,
* stop the AC queue so that we don't have to worry
* about frames that came in while we were doing that,
* which would require us to put them to the AC pending
* afterwards which just makes the code more complex.
* Start queuing up packets for this aggregation session.
* We're going to release them once the driver is OK with
* that.
*/
ieee80211_stop_queue_agg(local, tid);
clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
/*
* make sure no packets are being processed to get
* valid starting sequence number
* Make sure no packets are being processed. This ensures that
* we have a valid starting sequence number and that in-flight
* packets have been flushed out and no packets for this TID
* will go into the driver during the ampdu_action call.
*/
synchronize_net();
......@@ -340,17 +370,15 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
" tid %d\n", tid);
#endif
spin_lock_bh(&sta->lock);
ieee80211_agg_splice_packets(local, tid_tx, tid);
ieee80211_assign_tid_tx(sta, tid, NULL);
ieee80211_agg_splice_finish(local, tid);
spin_unlock_bh(&sta->lock);
ieee80211_wake_queue_agg(local, tid);
kfree_rcu(tid_tx, rcu_head);
return;
}
/* we can take packets again now */
ieee80211_wake_queue_agg(local, tid);
/* activate the timer for the recipient's addBA response */
mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
#ifdef CONFIG_MAC80211_HT_DEBUG
......@@ -466,38 +494,6 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
/*
* splice packets from the STA's pending to the local pending,
* requires a call to ieee80211_agg_splice_finish later
*/
static void __acquires(agg_queue)
ieee80211_agg_splice_packets(struct ieee80211_local *local,
struct tid_ampdu_tx *tid_tx, u16 tid)
{
int queue = ieee80211_ac_from_tid(tid);
unsigned long flags;
ieee80211_stop_queue_agg(local, tid);
if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
" from the pending queue\n", tid))
return;
if (!skb_queue_empty(&tid_tx->pending)) {
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
/* copy over remaining packets */
skb_queue_splice_tail_init(&tid_tx->pending,
&local->pending[queue]);
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
}
}
static void __releases(agg_queue)
ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
{
ieee80211_wake_queue_agg(local, tid);
}
static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
struct sta_info *sta, u16 tid)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册