提交 e78973ef 编写于 作者: E Emmanuel Grumbach

iwlwifi: mvm: BT Coex - minor API change

The BT Coex API underwent a minor backward compatible API
change.
We now need to set an invalid value in the override fields.
While at it, add kerneldoc comments on the fields in the
command.
Reviewed-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
上级 8a0063a0
......@@ -580,6 +580,8 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
bt_cmd->bt4_antenna_isolation = iwlwifi_mod_params.ant_coupling;
bt_cmd->bt4_tx_tx_delta_freq_thr = 15;
bt_cmd->bt4_tx_rx_max_freq0 = 15;
bt_cmd->override_primary_lut = BT_COEX_INVALID_LUT;
bt_cmd->override_secondary_lut = BT_COEX_INVALID_LUT;
flags = iwlwifi_mod_params.bt_coex_active ?
BT_COEX_NW : BT_COEX_DISABLE;
......
......@@ -141,7 +141,8 @@ enum iwl_bt_coex_lut_type {
BT_COEX_TX_DIS_LUT,
BT_COEX_MAX_LUT,
};
BT_COEX_INVALID_LUT = 0xff,
}; /* BT_COEX_DECISION_LUT_INDEX_API_E_VER_1 */
#define BT_COEX_LUT_SIZE (12)
#define BT_COEX_CORUN_LUT_SIZE (32)
......@@ -154,19 +155,23 @@ enum iwl_bt_coex_lut_type {
* @flags:&enum iwl_bt_coex_flags
* @max_kill:
* @bt_reduced_tx_power: enum %iwl_bt_reduced_tx_power
* @bt4_antenna_isolation:
* @bt4_antenna_isolation_thr:
* @bt4_tx_tx_delta_freq_thr:
* @bt4_tx_rx_max_freq0:
* @bt_prio_boost:
* @override_primary_lut: enum %iwl_bt_coex_lut_type: BT_COEX_INVALID_LUT
* should be set by default
* @override_secondary_lut: enum %iwl_bt_coex_lut_type: BT_COEX_INVALID_LUT
* should be set by default
* @bt4_antenna_isolation: antenna isolation
* @bt4_antenna_isolation_thr: antenna threshold value
* @bt4_tx_tx_delta_freq_thr: TxTx delta frequency
* @bt4_tx_rx_max_freq0: TxRx max frequency
* @bt_prio_boost: BT priority boost registers
* @wifi_tx_prio_boost: SW boost of wifi tx priority
* @wifi_rx_prio_boost: SW boost of wifi rx priority
* @kill_ack_msk:
* @kill_cts_msk:
* @decision_lut:
* @bt4_multiprio_lut:
* @bt4_corun_lut20:
* @bt4_corun_lut40:
* @kill_ack_msk: kill ACK mask. 1 - Tx ACK, 0 - kill Tx of ACK.
* @kill_cts_msk: kill CTS mask. 1 - Tx CTS, 0 - kill Tx of CTS.
* @decision_lut: PTA decision LUT, per Prio-Ch
* @bt4_multiprio_lut: multi priority LUT configuration
* @bt4_corun_lut20: co-running 20 MHz LUT configuration
* @bt4_corun_lut40: co-running 40 MHz LUT configuration
* @valid_bit_msk: enum %iwl_bt_coex_valid_bit_msk
*
* The structure is used for the BT_COEX command.
......@@ -175,7 +180,8 @@ struct iwl_bt_coex_cmd {
__le32 flags;
u8 max_kill;
u8 bt_reduced_tx_power;
u8 reserved[2];
u8 override_primary_lut;
u8 override_secondary_lut;
u8 bt4_antenna_isolation;
u8 bt4_antenna_isolation_thr;
......@@ -194,7 +200,7 @@ struct iwl_bt_coex_cmd {
__le32 bt4_corun_lut40[BT_COEX_CORUN_LUT_SIZE];
__le32 valid_bit_msk;
} __packed; /* BT_COEX_CMD_API_S_VER_3 */
} __packed; /* BT_COEX_CMD_API_S_VER_5 */
/**
* struct iwl_bt_coex_ci_cmd - bt coex channel inhibition command
......@@ -282,7 +288,7 @@ enum iwl_bt_activity_grading {
BT_ON_NO_CONNECTION = 1,
BT_LOW_TRAFFIC = 2,
BT_HIGH_TRAFFIC = 3,
};
}; /* BT_COEX_BT_ACTIVITY_GRADING_API_E_VER_1 */
/**
* struct iwl_bt_coex_profile_notif - notification about BT coex
......@@ -310,7 +316,7 @@ struct iwl_bt_coex_profile_notif {
__le32 primary_ch_lut;
__le32 secondary_ch_lut;
__le32 bt_activity_grading;
} __packed; /* BT_COEX_PROFILE_NTFY_API_S_VER_2 */
} __packed; /* BT_COEX_PROFILE_NTFY_API_S_VER_3 */
enum iwl_bt_coex_prio_table_event {
BT_COEX_PRIO_TBL_EVT_INIT_CALIB1 = 0,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册