提交 e76678dd 编写于 作者: A Alexander Duyck 提交者: David S. Miller

ixgbe: set max desc to prevent total RSC packet size of 64K

The performance of hardware RSC is greatly reduced if the total for max rsc
descriptors multiplied by the buffer size is greater than 65535.  To
prevent this we need to adjust the max rsc descriptors appropriately.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 82d04818
......@@ -75,6 +75,8 @@
#define IXGBE_RXBUFFER_128 128 /* Used for packet split */
#define IXGBE_RXBUFFER_256 256 /* Used for packet split */
#define IXGBE_RXBUFFER_2048 2048
#define IXGBE_RXBUFFER_4096 4096
#define IXGBE_RXBUFFER_8192 8192
#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */
#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_256
......
......@@ -1995,21 +1995,28 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
rscctrl |= IXGBE_RSCCTL_RSCEN;
/*
* if packet split is enabled we can only support up
* to max frags + 1 descriptors.
* we must limit the number of descriptors so that the
* total size of max desc * buf_len is not greater
* than 65535
*/
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
#if (MAX_SKB_FRAGS < 3)
rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
#elif (MAX_SKB_FRAGS < 7)
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
#elif (MAX_SKB_FRAGS < 15)
if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
#if (MAX_SKB_FRAGS > 16)
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
#elif (MAX_SKB_FRAGS > 8)
rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
#elif (MAX_SKB_FRAGS > 4)
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
#else
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
#endif
else
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
} else {
if (rx_buf_len < IXGBE_RXBUFFER_4096)
rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
else if (rx_buf_len < IXGBE_RXBUFFER_8192)
rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
else
rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
}
IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
}
/* Disable RSC for ACK packets */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册