Merge tag 'renesas-cleanup3-for-v3.12' of...

Merge tag 'renesas-cleanup3-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/renesas

From Simon Horman:
Third round of Renesas ARM based SoC cleanups for v3.12

* Remove global GPIO_NR definition from sh73a0 SoC
* Remove unnecessary nfsroot settings from bootargs of
  kzm9d and armadillo800eva
* Rename irq initialisation functions of r8a7779 SoC
  to make them consistent with other SoCs
* Simplify irq initialisation of r8a7740 SoC
* Add missing __initdata annotations to bockw board, and
  r8a7790 and r8a7779 SoCs
* Refactor time initialisation and remove shmobile_init_time.
  - This affects the following boards: kzm9g, marzen, ape6evm,
    armadillo800eva and bockw
  - This affects the following SoCs: r8a7790, r8a7779, r7a7740, r7a73a4
* Cleanup device registration code of r8a7778 SoC

* tag 'renesas-cleanup3-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (45 commits)
  ARM: shmobile: sh73a0: Remove global GPIO_NR definition
  ARM: shmobile: kzm9d: remove nfsroot settings from bootargs
  ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs
  ARM: shmobile: r8a7779: move r8a7779_init_irq_xxx() to setup
  ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup
  ARM: shmobile: bockw: add missing __initdata
  ARM: shmobile: r8a7790: add missing __initdata
  ARM: shmobile: r8a7779: add missing __initdata
  ARM: shmobile: Remove unused shmobile_init_time()
  ARM: shmobile: Use clocksource_of_init() on r8a7790
  ARM: shmobile: Use default ->init_time() on KZM9G DT ref
  ARM: shmobile: Use default ->init_time() on Marzen DT ref
  ARM: shmobile: Use default ->init_time() on APE6EVM DT ref
  ARM: shmobile: Use default ->init_time() on APE6EVM
  ARM: shmobile: Use default ->init_time() on Armadillo DT ref
  ARM: shmobile: Use default ->init_time() on Bockw DT ref
  ARM: shmobile: Use default ->init_time() on Bockw
  ARM: shmobile: Use default ->init_time() on r8a7779
  ARM: shmobile: Use default ->init_time() on r8a7778
  ARM: shmobile: Use default ->init_time() on r8a7740
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -186,12 +186,16 @@ dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	emev2-kzm9d-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
+	r8a7778-bockw-reference.dtb \
 	r8a7740-armadillo800eva-reference.dtb \
+	r8a7779-marzen.dtb \
 	r8a7779-marzen-reference.dtb \
 	r8a7790-lager.dtb \
+	r8a7790-lager-reference.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb \
 	r8a73a4-ape6evm.dtb \
+	r8a73a4-ape6evm-reference.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
 	socfpga_vt.dtb

arch/arm/boot/dts/emev2-kzm9d-reference.dts

@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
 	};
 
 	reg_1p8v: regulator@0 {

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -21,6 +21,6 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
 	};
 };

arch/arm/boot/dts/emev2.dtsi

@@ -46,6 +46,12 @@
 		      <0xe0020000 0x0100>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 120 4>,
+			     <0 121 4>;
+	};
+
 	sti@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;

arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts

+/*
+ * Device Tree Source for the APE6EVM board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a73a4.dtsi"
+
+/ {
+	model = "APE6EVM";
+	compatible = "renesas,ape6evm-reference", "renesas,r8a73a4";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	lbsc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x80000000>;
+	};
+};
+
+&i2c5 {
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};
+
+&pfc {
+	pinctrl-0 = <&scifa0_pins>;
+	pinctrl-names = "default";
+
+	scifa0_pins: scifa0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
+	};
+};

arch/arm/boot/dts/r8a73a4-ape6evm.dts

@@ -16,7 +16,7 @@
 	compatible = "renesas,ape6evm", "renesas,r8a73a4";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
+		bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory@40000000 {

arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

@@ -16,7 +16,7 @@
 	compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {

arch/arm/boot/dts/r8a7740-armadillo800eva.dts

@@ -16,7 +16,7 @@
 	compatible = "renesas,armadillo800eva";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw";
+		bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
 	};
 
 	memory {

arch/arm/boot/dts/r8a7740.dtsi

@@ -32,6 +32,11 @@
 		      <0xc2000000 0x1000>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 83 4>;
+	};
+
 	/* irqpin0: IRQ0 - IRQ7 */
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin";
@@ -139,4 +144,11 @@
 			      0 72 0x4
 			      0 73 0x4>;
 	};
+
+	tpu: pwm@e6600000 {
+		compatible = "renesas,tpu-r8a7740", "renesas,tpu";
+		reg = <0xe6600000 0x100>;
+		status = "disabled";
+		#pwm-cells = <3>;
+	};
 };

arch/arm/boot/dts/r8a7778-bockw-reference.dts

+/*
+ * Reference Device Tree Source for the Bock-W board
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on r8a7779
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7778.dtsi"
+
+/ {
+	model = "bockw";
+	compatible = "renesas,bockw-reference", "renesas,r8a7778";
+
+	chosen {
+		bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x10000000>;
+	};
+};

arch/arm/boot/dts/r8a7778-bockw.dts

@@ -22,7 +22,7 @@
 	compatible = "renesas,bockw", "renesas,r8a7778";
 
 	chosen {
-		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs";
+		bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs rw";
 	};
 
 	memory {

arch/arm/boot/dts/r8a7779-marzen-reference.dts

@@ -17,7 +17,7 @@
 	compatible = "renesas,marzen-reference", "renesas,r8a7779";
 
 	chosen {
-		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw";
 	};
 
 	memory {

arch/arm/boot/dts/r8a7779-marzen.dts

+/*
+ * Device Tree Source for the Marzen board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Simon Horman
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7779.dtsi"
+
+/ {
+	model = "marzen";
+	compatible = "renesas,marzen", "renesas,r8a7779";
+
+	chosen {
+		bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+};

arch/arm/boot/dts/r8a7790-lager-reference.dts

+/*
+ * Device Tree Source for the Lager board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "r8a7790.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lager";
+	compatible = "renesas,lager-reference", "renesas,r8a7790";
+
+	chosen {
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	lbsc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led6 {
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+		};
+		led7 {
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+		led8 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};

arch/arm/boot/dts/r8a7790-lager.dts

@@ -16,7 +16,7 @@
 	compatible = "renesas,lager", "renesas,r8a7790";
 
 	chosen {
-		bootargs = "console=ttySC6,115200 ignore_loglevel";
+		bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
 	};
 
 	memory@40000000 {

arch/arm/boot/dts/sh73a0-kzm9g-reference.dts

@@ -32,7 +32,7 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
 	};
 
 	memory {

arch/arm/boot/dts/sh73a0-kzm9g.dts

@@ -16,7 +16,7 @@
 	compatible = "renesas,kzm9g", "renesas,sh73a0";
 
 	chosen {
-		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200";
+		bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw";
 	};
 
 	memory {

arch/arm/boot/dts/sh73a0.dtsi

@@ -38,6 +38,12 @@
 		      <0xf0000100 0x100>;
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 55 4>,
+			     <0 56 4>;
+	};
+
 	irqpin0: irqpin@e6900000 {
 		compatible = "renesas,intc-irqpin";
 		#interrupt-cells = <2>;

arch/arm/mach-shmobile/Kconfig

@@ -76,6 +76,17 @@ config MACH_APE6EVM
 	depends on ARCH_R8A73A4
 	select USE_OF
 
+config MACH_APE6EVM_REFERENCE
+	bool "APE6EVM board - Reference Device Tree Implementation"
+	depends on ARCH_R8A73A4
+	select USE_OF
+	---help---
+	   Use reference implementation of APE6EVM board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
@@ -113,11 +124,26 @@ config MACH_BOCKW
 	select RENESAS_INTC_IRQPIN
 	select USE_OF
 
+config MACH_BOCKW_REFERENCE
+	bool "BOCK-W  - Reference Device Tree Implementation"
+	depends on ARCH_R8A7778
+	select ARCH_REQUIRE_GPIOLIB
+	select RENESAS_INTC_IRQPIN
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	---help---
+	   Use reference implementation of BockW board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
 
 config MACH_MARZEN_REFERENCE
 	bool "MARZEN board - Reference Device Tree Implementation"
@@ -137,6 +163,17 @@ config MACH_LAGER
 	depends on ARCH_R8A7790
 	select USE_OF
 
+config MACH_LAGER_REFERENCE
+	bool "Lager board - Reference Device Tree Implementation"
+	depends on ARCH_R8A7790
+	select USE_OF
+	---help---
+	   Use reference implementation of Lager board support
+	   which makes use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2

arch/arm/mach-shmobile/Makefile

@@ -9,9 +9,9 @@ obj-y				:= timer.o console.o clock.o
 obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
 obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
 obj-$(CONFIG_ARCH_R8A73A4)	+= setup-r8a73a4.o clock-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7740)	+= setup-r8a7740.o clock-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7778)	+= setup-r8a7778.o clock-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7779)	+= setup-r8a7779.o clock-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)	+= setup-r8a7790.o clock-r8a7790.o
 obj-$(CONFIG_ARCH_EMEV2)	+= setup-emev2.o clock-emev2.o
 
@@ -34,11 +34,14 @@ obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 
 # Board objects
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
+obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
+obj-$(CONFIG_MACH_BOCKW_REFERENCE)	+= board-bockw-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
+obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o

arch/arm/mach-shmobile/Makefile.boot

 # per-board load address for uImage
 loadaddr-y	:=
 loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
+loadaddr-$(CONFIG_MACH_APE6EVM_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
+loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
+loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000

arch/arm/mach-shmobile/board-ape6evm-reference.c

+/*
+ * APE6EVM board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_device.h>
+#include <linux/sh_clk.h>
+#include <mach/common.h>
+#include <mach/r8a73a4.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static void __init ape6evm_add_standard_devices(void)
+{
+
+	struct clk *parent;
+	struct clk *mp;
+
+	r8a73a4_clock_init();
+
+	/* MP clock parent = extal2 */
+	parent      = clk_get(NULL, "extal2");
+	mp          = clk_get(NULL, "mp");
+	BUG_ON(IS_ERR(parent) || IS_ERR(mp));
+
+	clk_set_parent(mp, parent);
+	clk_put(parent);
+	clk_put(mp);
+
+	r8a73a4_add_dt_devices();
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+	platform_device_register_simple("cpufreq-cpu0", -1, NULL, 0);
+}
+
+static const char *ape6evm_boards_compat_dt[] __initdata = {
+	"renesas,ape6evm-reference",
+	NULL,
+};
+
+DT_MACHINE_START(APE6EVM_DT, "ape6evm")
+	.init_early	= r8a73a4_init_delay,
+	.init_machine	= ape6evm_add_standard_devices,
+	.dt_compat	= ape6evm_boards_compat_dt,
+MACHINE_END

arch/arm/mach-shmobile/board-ape6evm.c

@@ -102,7 +102,6 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
 	.init_early	= r8a73a4_init_delay,
-	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-armadillo800eva-reference.c

@@ -206,7 +206,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference")
 	.init_early	= r8a7740_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
-	.init_time	= shmobile_timer_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= eva_boards_compat_dt,
 	.restart	= eva_restart,

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -1312,7 +1312,7 @@ static const char *eva_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.map_io		= r8a7740_map_io,
 	.init_early	= eva_add_early_devices,
-	.init_irq	= r8a7740_init_irq,
+	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= eva_init,
 	.init_late	= shmobile_init_late,
 	.init_time	= eva_earlytimer_init,

arch/arm/mach-shmobile/board-bockw-reference.c

+/*
+ * Bock-W board support
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
+#include <mach/common.h>
+#include <mach/r8a7778.h>
+#include <asm/mach/arch.h>
+
+/*
+ *	see board-bock.c for checking detail of dip-switch
+ */
+
+static const struct pinctrl_map bockw_pinctrl_map[] = {
+	/* SCIF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_data_a", "scif0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778",
+				  "scif0_ctrl", "scif0"),
+};
+
+static void __init bockw_init(void)
+{
+	r8a7778_clock_init();
+
+	pinctrl_register_mappings(bockw_pinctrl_map,
+				  ARRAY_SIZE(bockw_pinctrl_map));
+	r8a7778_pinmux_init();
+	r8a7778_add_dt_devices();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *bockw_boards_compat_dt[] __initdata = {
+	"renesas,bockw-reference",
+	NULL,
+};
+
+DT_MACHINE_START(BOCKW_DT, "bockw")
+	.init_early	= r8a7778_init_delay,
+	.init_irq	= r8a7778_init_irq_dt,
+	.init_machine	= bockw_init,
+	.dt_compat	= bockw_boards_compat_dt,
+MACHINE_END

arch/arm/mach-shmobile/board-bockw.c

@@ -20,8 +20,11 @@
 
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
@@ -64,28 +67,38 @@ static struct regulator_consumer_supply dummy_supplies[] = {
 	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
 };
 
-static struct smsc911x_platform_config smsc911x_data = {
+static struct smsc911x_platform_config smsc911x_data __initdata = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct resource smsc911x_resources[] = {
+static struct resource smsc911x_resources[] __initdata = {
 	DEFINE_RES_MEM(0x18300000, 0x1000),
 	DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
 };
 
 /* USB */
+static struct resource usb_phy_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe70800, 0x100),
+	DEFINE_RES_MEM(0xffe76000, 0x100),
+};
+
 static struct rcar_phy_platform_data usb_phy_platform_data __initdata;
 
 /* SDHI */
-static struct sh_mobile_sdhi_info sdhi0_info = {
+static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 };
 
+static struct resource sdhi0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xFFE4C000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x77)),
+};
+
 static struct sh_eth_plat_data ether_platform_data __initdata = {
 	.phy		= 0x01,
 	.edmac_endian	= EDMAC_LITTLE_ENDIAN,
@@ -135,7 +148,12 @@ static struct spi_board_info spi_board_info[] __initdata = {
 };
 
 /* MMC */
-static struct sh_mmcif_plat_data sh_mmcif_plat = {
+static struct resource mmc_resources[] __initdata = {
+	DEFINE_RES_MEM(0xffe4e000, 0x100),
+	DEFINE_RES_IRQ(gic_iid(0x5d)),
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat __initdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
 	.caps		= MMC_CAP_4_BIT_DATA |
@@ -187,11 +205,7 @@ static void __init bockw_init(void)
 	r8a7778_clock_init();
 	r8a7778_init_irq_extpin(1);
 	r8a7778_add_standard_devices();
-	r8a7778_add_usb_phy_device(&usb_phy_platform_data);
 	r8a7778_add_ether_device(&ether_platform_data);
-	r8a7778_add_i2c_device(0);
-	r8a7778_add_hspi_device(0);
-	r8a7778_add_mmc_device(&sh_mmcif_plat);
 
 	i2c_register_board_info(0, i2c0_devices,
 				ARRAY_SIZE(i2c0_devices));
@@ -201,6 +215,19 @@ static void __init bockw_init(void)
 				  ARRAY_SIZE(bockw_pinctrl_map));
 	r8a7778_pinmux_init();
 
+	platform_device_register_resndata(
+		&platform_bus, "sh_mmcif", -1,
+		mmc_resources, ARRAY_SIZE(mmc_resources),
+		&sh_mmcif_plat, sizeof(struct sh_mmcif_plat_data));
+
+	platform_device_register_resndata(
+		&platform_bus, "rcar_usb_phy", -1,
+		usb_phy_resources,
+		ARRAY_SIZE(usb_phy_resources),
+		&usb_phy_platform_data,
+		sizeof(struct rcar_phy_platform_data));
+
+
 	/* for SMSC */
 	base = ioremap_nocache(FPGA, SZ_1M);
 	if (base) {
@@ -236,7 +263,10 @@ static void __init bockw_init(void)
 		iowrite32(ioread32(base + PUPR4) | (3 << 26), base + PUPR4);
 		iounmap(base);
 
-		r8a7778_sdhi_init(0, &sdhi0_info);
+		platform_device_register_resndata(
+			&platform_bus, "sh_mobile_sdhi", 0,
+			sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
+			&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
 	}
 }
 
@@ -249,7 +279,6 @@ DT_MACHINE_START(BOCKW_DT, "bockw")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
 	.init_machine	= bockw_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= bockw_boards_compat_dt,
 	.init_late      = r8a7778_init_late,
 MACHINE_END

arch/arm/mach-shmobile/board-kzm9g-reference.c

@@ -99,6 +99,5 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_machine	= kzm_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-kzm9g.c

@@ -54,14 +54,14 @@
 /*
  * external GPIO
  */
-#define GPIO_PCF8575_BASE	(GPIO_NR)
-#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
-#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
-#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
-#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
-#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
-#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
-#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+#define GPIO_PCF8575_BASE	(310)
+#define GPIO_PCF8575_PORT10	(GPIO_PCF8575_BASE + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_PCF8575_BASE + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_PCF8575_BASE + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_PCF8575_BASE + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_PCF8575_BASE + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_PCF8575_BASE + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_PCF8575_BASE + 14)
 
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {

arch/arm/mach-shmobile/intc-r8a7740.c → arch/arm/mach-shmobile/board-lager-reference.c

 /*
- * R8A7740 processor support
+ * Lager board support - Reference DT implementation
  *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Simon Horman
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,50 +19,27 @@
  */
 
 #include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
+#include <linux/of_platform.h>
+#include <mach/r8a7790.h>
+#include <asm/mach/arch.h>
 
-static void __init r8a7740_init_irq_common(void)
+static void __init lager_add_standard_devices(void)
 {
-	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
-	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
-	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
+	/* clocks are setup late during boot in the case of DT */
+	r8a7790_clock_init();
 
-	/* route signals to GIC */
-	iowrite32(0x0, pfc_inta_ctrl);
-
-	/*
-	 * To mask the shared interrupt to SPI 149 we must ensure to set
-	 * PRIO *and* MASK. Else we run into IRQ floods when registering
-	 * the intc_irqpin devices
-	 */
-	iowrite32(0x0, intc_prio_base + 0x0);
-	iowrite32(0x0, intc_prio_base + 0x4);
-	iowrite32(0x0, intc_prio_base + 0x8);
-	iowrite32(0x0, intc_prio_base + 0xc);
-	iowrite8(0xff, intc_msk_base + 0x0);
-	iowrite8(0xff, intc_msk_base + 0x4);
-	iowrite8(0xff, intc_msk_base + 0x8);
-	iowrite8(0xff, intc_msk_base + 0xc);
-
-	iounmap(intc_prio_base);
-	iounmap(intc_msk_base);
-	iounmap(pfc_inta_ctrl);
-}
-
-void __init r8a7740_init_irq_of(void)
-{
-	irqchip_init();
-	r8a7740_init_irq_common();
+	r8a7790_add_dt_devices();
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-void __init r8a7740_init_irq(void)
-{
-	void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
-	void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
-
-	/* initialize the Generic Interrupt Controller PL390 r0p0 */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-	r8a7740_init_irq_common();
-}
+static const char *lager_boards_compat_dt[] __initdata = {
+	"renesas,lager-reference",
+	NULL,
+};
+
+DT_MACHINE_START(LAGER_DT, "lager")
+	.init_early	= r8a7790_init_delay,
+	.init_machine	= lager_add_standard_devices,
+	.init_time	= r8a7790_timer_init,
+	.dt_compat	= lager_boards_compat_dt,
+MACHINE_END

arch/arm/mach-shmobile/board-marzen-reference.c

@@ -70,6 +70,5 @@ DT_MACHINE_START(MARZEN, "marzen")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= marzen_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= marzen_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-marzen.c

@@ -257,13 +257,18 @@ static void __init marzen_init(void)
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
 
-MACHINE_START(MARZEN, "marzen")
+static const char *marzen_boards_compat_dt[] __initdata = {
+        "renesas,marzen",
+        NULL,
+};
+
+DT_MACHINE_START(MARZEN, "marzen")
 	.smp		= smp_ops(r8a7779_smp_ops),
 	.map_io		= r8a7779_map_io,
 	.init_early	= r8a7779_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= r8a7779_init_irq,
+	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= marzen_init,
 	.init_late	= r8a7779_init_late,
+	.dt_compat	= marzen_boards_compat_dt,
 	.init_time	= r8a7779_earlytimer_init,
 MACHINE_END

arch/arm/mach-shmobile/include/mach/common.h

@@ -2,7 +2,6 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_earlytimer_init(void);
-extern void shmobile_timer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
 			 unsigned int mult, unsigned int div);
 struct twd_local_timer;

arch/arm/mach-shmobile/include/mach/r8a73a4.h

@@ -2,6 +2,7 @@
 #define __ASM_R8A73A4_H__
 
 void r8a73a4_add_standard_devices(void);
+void r8a73a4_add_dt_devices(void);
 void r8a73a4_clock_init(void);
 void r8a73a4_pinmux_init(void);
 void r8a73a4_init_delay(void);

arch/arm/mach-shmobile/include/mach/r8a7740.h

@@ -48,7 +48,6 @@ enum {
 
 extern void r8a7740_meram_workaround(void);
 extern void r8a7740_init_delay(void);
-extern void r8a7740_init_irq(void);
 extern void r8a7740_init_irq_of(void);
 extern void r8a7740_map_io(void);
 extern void r8a7740_add_early_devices(void);

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -18,18 +18,12 @@
 #ifndef __ASM_R8A7778_H__
 #define __ASM_R8A7778_H__
 
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/sh_eth.h>
-#include <linux/platform_data/usb-rcar-phy.h>
 
 extern void r8a7778_add_standard_devices(void);
 extern void r8a7778_add_standard_devices_dt(void);
 extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
-extern void r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata);
-extern void r8a7778_add_i2c_device(int id);
-extern void r8a7778_add_hspi_device(int id);
-extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
+extern void r8a7778_add_dt_devices(void);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);
@@ -37,6 +31,5 @@ extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);
 extern void r8a7778_pinmux_init(void);
-extern void r8a7778_sdhi_init(int id, struct sh_mobile_sdhi_info *info);
 
 #endif /* __ASM_R8A7778_H__ */

arch/arm/mach-shmobile/include/mach/r8a7779.h

@@ -24,7 +24,6 @@ static inline struct r8a7779_pm_ch *to_r8a7779_ch(struct generic_pm_domain *d)
 }
 
 extern void r8a7779_init_delay(void);
-extern void r8a7779_init_irq(void);
 extern void r8a7779_init_irq_extpin(int irlm);
 extern void r8a7779_init_irq_dt(void);
 extern void r8a7779_map_io(void);

arch/arm/mach-shmobile/include/mach/r8a7790.h

@@ -2,6 +2,7 @@
 #define __ASM_R8A7790_H__
 
 void r8a7790_add_standard_devices(void);
+void r8a7790_add_dt_devices(void);
 void r8a7790_clock_init(void);
 void r8a7790_pinmux_init(void);
 void r8a7790_init_delay(void);

arch/arm/mach-shmobile/include/mach/sh73a0.h

 #ifndef __ASM_SH73A0_H__
 #define __ASM_SH73A0_H__
 
-#define GPIO_NR			310
-
 /* DMA slave IDs */
 enum {
 	SHDMA_SLAVE_INVALID,

arch/arm/mach-shmobile/intc-r8a7779.c

-/*
- * r8a7779 processor support - INTC hardware block
- *
- * Copyright (C) 2011  Renesas Solutions Corp.
- * Copyright (C) 2011  Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
-#include <linux/platform_data/irq-renesas-intc-irqpin.h>
-#include <linux/irqchip.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
-#include <mach/r8a7779.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#define INT2SMSKCR0 IOMEM(0xfe7822a0)
-#define INT2SMSKCR1 IOMEM(0xfe7822a4)
-#define INT2SMSKCR2 IOMEM(0xfe7822a8)
-#define INT2SMSKCR3 IOMEM(0xfe7822ac)
-#define INT2SMSKCR4 IOMEM(0xfe7822b0)
-
-#define INT2NTSR0 IOMEM(0xfe700060)
-#define INT2NTSR1 IOMEM(0xfe700064)
-
-static struct renesas_intc_irqpin_config irqpin0_platform_data = {
-	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-	.sense_bitfield_width = 2,
-};
-
-static struct resource irqpin0_resources[] = {
-	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
-	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
-	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
-	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
-	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
-	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
-	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
-	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
-	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
-};
-
-static struct platform_device irqpin0_device = {
-	.name		= "renesas_intc_irqpin",
-	.id		= 0,
-	.resource	= irqpin0_resources,
-	.num_resources	= ARRAY_SIZE(irqpin0_resources),
-	.dev		= {
-		.platform_data	= &irqpin0_platform_data,
-	},
-};
-
-void __init r8a7779_init_irq_extpin(int irlm)
-{
-	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
-	unsigned long tmp;
-
-	if (icr0) {
-		tmp = ioread32(icr0);
-		if (irlm)
-			tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
-		else
-			tmp &= ~(1 << 23); /* IRL mode - not supported */
-		tmp |= (1 << 21); /* LVLMODE = 1 */
-		iowrite32(tmp, icr0);
-		iounmap(icr0);
-
-		if (irlm)
-			platform_device_register(&irqpin0_device);
-	} else
-		pr_warn("r8a7779: unable to setup external irq pin mode\n");
-}
-
-static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
-{
-	return 0; /* always allow wakeup */
-}
-
-static void __init r8a7779_init_irq_common(void)
-{
-	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
-
-	/* route all interrupts to ARM */
-	__raw_writel(0xffffffff, INT2NTSR0);
-	__raw_writel(0x3fffffff, INT2NTSR1);
-
-	/* unmask all known interrupts in INTCS2 */
-	__raw_writel(0xfffffff0, INT2SMSKCR0);
-	__raw_writel(0xfff7ffff, INT2SMSKCR1);
-	__raw_writel(0xfffbffdf, INT2SMSKCR2);
-	__raw_writel(0xbffffffc, INT2SMSKCR3);
-	__raw_writel(0x003fee3f, INT2SMSKCR4);
-}
-
-void __init r8a7779_init_irq(void)
-{
-	void __iomem *gic_dist_base = IOMEM(0xf0001000);
-	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7779_init_irq_common();
-}
-
-#ifdef CONFIG_OF
-void __init r8a7779_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7779_init_irq_common();
-}
-#endif

arch/arm/mach-shmobile/setup-r8a73a4.c

@@ -188,7 +188,7 @@ static struct resource cmt10_resources[] = {
 					  &cmt##idx##_platform_data,	\
 					  sizeof(struct sh_timer_config))
 
-void __init r8a73a4_add_standard_devices(void)
+void __init r8a73a4_add_dt_devices(void)
 {
 	r8a73a4_register_scif(SCIFA0);
 	r8a73a4_register_scif(SCIFA1);
@@ -196,10 +196,15 @@ void __init r8a73a4_add_standard_devices(void)
 	r8a73a4_register_scif(SCIFB1);
 	r8a73a4_register_scif(SCIFB2);
 	r8a73a4_register_scif(SCIFB3);
+	r8a7790_register_cmt(10);
+}
+
+void __init r8a73a4_add_standard_devices(void)
+{
+	r8a73a4_add_dt_devices();
 	r8a73a4_register_irqc(0);
 	r8a73a4_register_irqc(1);
 	r8a73a4_register_thermal();
-	r8a7790_register_cmt(10);
 }
 
 void __init r8a73a4_init_delay(void)
@@ -218,7 +223,6 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
 	.init_early	= r8a73a4_init_delay,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a73a4_boards_compat_dt,
 MACHINE_END
 #endif /* CONFIG_USE_OF */

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -22,6 +22,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
@@ -1019,6 +1021,36 @@ void __init r8a7740_init_delay(void)
 	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
 };
 
+void __init r8a7740_init_irq_of(void)
+{
+	void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
+	void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
+	void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
+
+	irqchip_init();
+
+	/* route signals to GIC */
+	iowrite32(0x0, pfc_inta_ctrl);
+
+	/*
+	 * To mask the shared interrupt to SPI 149 we must ensure to set
+	 * PRIO *and* MASK. Else we run into IRQ floods when registering
+	 * the intc_irqpin devices
+	 */
+	iowrite32(0x0, intc_prio_base + 0x0);
+	iowrite32(0x0, intc_prio_base + 0x4);
+	iowrite32(0x0, intc_prio_base + 0x8);
+	iowrite32(0x0, intc_prio_base + 0xc);
+	iowrite8(0xff, intc_msk_base + 0x0);
+	iowrite8(0xff, intc_msk_base + 0x4);
+	iowrite8(0xff, intc_msk_base + 0x8);
+	iowrite8(0xff, intc_msk_base + 0xc);
+
+	iounmap(intc_prio_base);
+	iounmap(intc_msk_base);
+	iounmap(pfc_inta_ctrl);
+}
+
 static void __init r8a7740_generic_init(void)
 {
 	r8a7740_clock_init(0);
@@ -1035,7 +1067,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
 	.init_early	= r8a7740_init_delay,
 	.init_irq	= r8a7740_init_irq_of,
 	.init_machine	= r8a7740_generic_init,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7740_boards_compat_dt,
 MACHINE_END
 

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -95,20 +95,6 @@ static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 		&sh_tmu##idx##_platform_data,		\
 		sizeof(sh_tmu##idx##_platform_data))
 
-/* USB PHY */
-static struct resource usb_phy_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe70800, 0x100),
-	DEFINE_RES_MEM(0xffe76000, 0x100),
-};
-
-void __init r8a7778_add_usb_phy_device(struct rcar_phy_platform_data *pdata)
-{
-	platform_device_register_resndata(&platform_bus, "rcar_usb_phy", -1,
-					  usb_phy_resources,
-					  ARRAY_SIZE(usb_phy_resources),
-					  pdata, sizeof(*pdata));
-}
-
 /* USB */
 static struct usb_phy *phy;
 
@@ -248,30 +234,6 @@ void __init r8a7778_pinmux_init(void)
 	r8a7778_register_gpio(4);
 };
 
-/* SDHI */
-static struct resource sdhi_resources[] __initdata = {
-	/* SDHI0 */
-	DEFINE_RES_MEM(0xFFE4C000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x77)),
-	/* SDHI1 */
-	DEFINE_RES_MEM(0xFFE4D000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x78)),
-	/* SDHI2 */
-	DEFINE_RES_MEM(0xFFE4F000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x76)),
-};
-
-void __init r8a7778_sdhi_init(int id,
-			      struct sh_mobile_sdhi_info *info)
-{
-	BUG_ON(id < 0 || id > 2);
-
-	platform_device_register_resndata(
-		&platform_bus, "sh_mobile_sdhi", id,
-		sdhi_resources + (2 * id), 2,
-		info, sizeof(*info));
-}
-
 /* I2C */
 static struct resource i2c_resources[] __initdata = {
 	/* I2C0 */
@@ -288,7 +250,7 @@ static struct resource i2c_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x6d)),
 };
 
-void __init r8a7778_add_i2c_device(int id)
+static void __init r8a7778_register_i2c(int id)
 {
 	BUG_ON(id < 0 || id > 3);
 
@@ -310,7 +272,7 @@ static struct resource hspi_resources[] __initdata = {
 	DEFINE_RES_IRQ(gic_iid(0x75)),
 };
 
-void __init r8a7778_add_hspi_device(int id)
+void __init r8a7778_register_hspi(int id)
 {
 	BUG_ON(id < 0 || id > 2);
 
@@ -319,21 +281,7 @@ void __init r8a7778_add_hspi_device(int id)
 		hspi_resources + (2 * id), 2);
 }
 
-/* MMC */
-static struct resource mmc_resources[] __initdata = {
-	DEFINE_RES_MEM(0xffe4e000, 0x100),
-	DEFINE_RES_IRQ(gic_iid(0x5d)),
-};
-
-void __init r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info)
-{
-	platform_device_register_resndata(
-		&platform_bus, "sh_mmcif", -1,
-		mmc_resources, ARRAY_SIZE(mmc_resources),
-		info, sizeof(*info));
-}
-
-void __init r8a7778_add_standard_devices(void)
+void __init r8a7778_add_dt_devices(void)
 {
 	int i;
 
@@ -357,6 +305,18 @@ void __init r8a7778_add_standard_devices(void)
 	r8a7778_register_tmu(1);
 }
 
+void __init r8a7778_add_standard_devices(void)
+{
+	r8a7778_add_dt_devices();
+	r8a7778_register_i2c(0);
+	r8a7778_register_i2c(1);
+	r8a7778_register_i2c(2);
+	r8a7778_register_i2c(3);
+	r8a7778_register_hspi(0);
+	r8a7778_register_hspi(1);
+	r8a7778_register_hspi(2);
+}
+
 void __init r8a7778_init_late(void)
 {
 	phy = usb_get_phy(USB_PHY_TYPE_USB2);
@@ -446,7 +406,6 @@ static const char *r8a7778_compat_dt[] __initdata = {
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
-	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7778_compat_dt,
 	.init_late      = r8a7778_init_late,
 MACHINE_END

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -22,8 +22,11 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
@@ -67,6 +70,60 @@ void __init r8a7779_map_io(void)
 	iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
 }
 
+/* IRQ */
+#define INT2SMSKCR0 IOMEM(0xfe7822a0)
+#define INT2SMSKCR1 IOMEM(0xfe7822a4)
+#define INT2SMSKCR2 IOMEM(0xfe7822a8)
+#define INT2SMSKCR3 IOMEM(0xfe7822ac)
+#define INT2SMSKCR4 IOMEM(0xfe7822b0)
+
+#define INT2NTSR0 IOMEM(0xfe700060)
+#define INT2NTSR1 IOMEM(0xfe700064)
+
+static struct renesas_intc_irqpin_config irqpin0_platform_data __initdata = {
+	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
+	.sense_bitfield_width = 2,
+};
+
+static struct resource irqpin0_resources[] __initdata = {
+	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
+	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
+	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
+	DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
+	DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
+	DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
+	DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
+	DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
+	DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
+};
+
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+	void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
+	u32 tmp;
+
+	if (!icr0) {
+		pr_warn("r8a7779: unable to setup external irq pin mode\n");
+		return;
+	}
+
+	tmp = ioread32(icr0);
+	if (irlm)
+		tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
+	else
+		tmp &= ~(1 << 23); /* IRL mode - not supported */
+	tmp |= (1 << 21); /* LVLMODE = 1 */
+	iowrite32(tmp, icr0);
+	iounmap(icr0);
+
+	if (irlm)
+		platform_device_register_resndata(
+			&platform_bus, "renesas_intc_irqpin", -1,
+			irqpin0_resources, ARRAY_SIZE(irqpin0_resources),
+			&irqpin0_platform_data, sizeof(irqpin0_platform_data));
+}
+
+/* PFC/GPIO */
 static struct resource r8a7779_pfc_resources[] = {
 	DEFINE_RES_MEM(0xfffc0000, 0x023c),
 };
@@ -537,7 +594,7 @@ static struct platform_device ohci1_device = {
 };
 
 /* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
 	{
 		.start	= 0xfde00000,
 		.end	= 0xfde003ff,
@@ -641,6 +698,29 @@ void __init r8a7779_init_late(void)
 }
 
 #ifdef CONFIG_USE_OF
+static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
+{
+	return 0; /* always allow wakeup */
+}
+
+void __init r8a7779_init_irq_dt(void)
+{
+	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+
+	irqchip_init();
+
+	/* route all interrupts to ARM */
+	__raw_writel(0xffffffff, INT2NTSR0);
+	__raw_writel(0x3fffffff, INT2NTSR1);
+
+	/* unmask all known interrupts in INTCS2 */
+	__raw_writel(0xfffffff0, INT2SMSKCR0);
+	__raw_writel(0xfff7ffff, INT2SMSKCR1);
+	__raw_writel(0xfffbffdf, INT2SMSKCR2);
+	__raw_writel(0xbffffffc, INT2SMSKCR3);
+	__raw_writel(0x003fee3f, INT2SMSKCR4);
+}
+
 void __init r8a7779_init_delay(void)
 {
 	shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
@@ -667,7 +747,6 @@ DT_MACHINE_START(R8A7779_DT, "Generic R8A7779 (Flattened Device Tree)")
 	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= r8a7779_init_irq_dt,
 	.init_machine	= r8a7779_add_standard_devices_dt,
-	.init_time	= shmobile_timer_init,
 	.init_late	= r8a7779_init_late,
 	.dt_compat	= r8a7779_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/clocksource.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
@@ -160,13 +161,13 @@ static struct resource thermal_resources[] __initdata = {
 					thermal_resources,		\
 					ARRAY_SIZE(thermal_resources))
 
-static struct sh_timer_config cmt00_platform_data = {
+static struct sh_timer_config cmt00_platform_data __initdata = {
 	.name = "CMT00",
 	.timer_bit = 0,
 	.clockevent_rating = 80,
 };
 
-static struct resource cmt00_resources[] = {
+static struct resource cmt00_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffca0510, 0x0c),
 	DEFINE_RES_MEM(0xffca0500, 0x04),
 	DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */
@@ -179,7 +180,7 @@ static struct resource cmt00_resources[] = {
 					  &cmt##idx##_platform_data,	\
 					  sizeof(struct sh_timer_config))
 
-void __init r8a7790_add_standard_devices(void)
+void __init r8a7790_add_dt_devices(void)
 {
 	r8a7790_register_scif(SCIFA0);
 	r8a7790_register_scif(SCIFA1);
@@ -191,9 +192,14 @@ void __init r8a7790_add_standard_devices(void)
 	r8a7790_register_scif(SCIF1);
 	r8a7790_register_scif(HSCIF0);
 	r8a7790_register_scif(HSCIF1);
+	r8a7790_register_cmt(00);
+}
+
+void __init r8a7790_add_standard_devices(void)
+{
+	r8a7790_add_dt_devices();
 	r8a7790_register_irqc(0);
 	r8a7790_register_thermal();
-	r8a7790_register_cmt(00);
 }
 
 #define MODEMR 0xe6160060
@@ -258,7 +264,7 @@ void __init r8a7790_timer_init(void)
 	iounmap(base);
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
-	shmobile_timer_init();
+	clocksource_of_init();
 }
 
 void __init r8a7790_init_delay(void)

arch/arm/mach-shmobile/smp-r8a7779.c

@@ -99,6 +99,9 @@ static int r8a7779_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 {
+
+	/* setup r8a7779 specific SCU base */
+	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
 	scu_enable(shmobile_scu_base);
 
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
@@ -117,14 +120,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus)
 	r8a7779_platform_cpu_kill(3);
 }
 
-static void __init r8a7779_smp_init_cpus(void)
-{
-	/* setup r8a7779 specific SCU base */
-	shmobile_scu_base = IOMEM(R8A7779_SCU_BASE);
-
-	shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 static int r8a7779_scu_psr_core_disabled(int cpu)
 {
@@ -175,7 +170,6 @@ static int r8a7779_cpu_disable(unsigned int cpu)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations r8a7779_smp_ops  __initdata = {
-	.smp_init_cpus		= r8a7779_smp_init_cpus,
 	.smp_prepare_cpus	= r8a7779_smp_prepare_cpus,
 	.smp_boot_secondary	= r8a7779_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-shmobile/smp-sh73a0.c

@@ -62,6 +62,8 @@ static int sh73a0_boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 {
+	/* setup sh73a0 specific SCU base */
+	shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
 	scu_enable(shmobile_scu_base);
 
 	/* Map the reset vector (in headsmp-scu.S, headsmp.S) */
@@ -74,14 +76,6 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus)
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 }
 
-static void __init sh73a0_smp_init_cpus(void)
-{
-	/* setup sh73a0 specific SCU base */
-	shmobile_scu_base = IOMEM(SH73A0_SCU_BASE);
-
-	shmobile_smp_init_cpus(scu_get_core_count(shmobile_scu_base));
-}
-
 #ifdef CONFIG_HOTPLUG_CPU
 static int sh73a0_cpu_kill(unsigned int cpu)
 {
@@ -120,7 +114,6 @@ static int sh73a0_cpu_disable(unsigned int cpu)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 struct smp_operations sh73a0_smp_ops __initdata = {
-	.smp_init_cpus		= sh73a0_smp_init_cpus,
 	.smp_prepare_cpus	= sh73a0_smp_prepare_cpus,
 	.smp_boot_secondary	= sh73a0_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU

arch/arm/mach-shmobile/timer.c

@@ -59,7 +59,3 @@ void __init shmobile_earlytimer_init(void)
 	late_time_init = shmobile_late_time_init;
 }
 
-void __init shmobile_timer_init(void)
-{
-	clocksource_of_init();
-}