提交 e65fb009 编写于 作者: S Sascha Hauer

[ARM] MXC: remove _clk suffix from clock names

The context makes it clear already that these are clocks, so there's
no need for such a suffix. This patch only changes the clocks actually
used in the tree. The remaining clocks are renamed in the subsequent
architecture specific patches.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 30c730f8
......@@ -462,7 +462,7 @@ static struct clk clko_clk = {
};
static struct clk dma_clk = {
.name = "dma_clk",
.name = "dma",
.parent = &hclk,
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
......@@ -513,7 +513,7 @@ static struct clk gpt_clk = {
};
static struct clk uart_clk = {
.name = "uart_clk",
.name = "uart",
.parent = &perclk[0],
.round_rate = _clk_parent_round_rate,
.set_rate = _clk_parent_set_rate,
......
......@@ -685,7 +685,7 @@ static struct clk per_clk[] = {
struct clk uart1_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 0,
.parent = &per_clk[0],
.secondary = &uart1_clk[1],
......@@ -702,7 +702,7 @@ struct clk uart1_clk[] = {
struct clk uart2_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 1,
.parent = &per_clk[0],
.secondary = &uart2_clk[1],
......@@ -719,7 +719,7 @@ struct clk uart2_clk[] = {
struct clk uart3_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 2,
.parent = &per_clk[0],
.secondary = &uart3_clk[1],
......@@ -736,7 +736,7 @@ struct clk uart3_clk[] = {
struct clk uart4_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 3,
.parent = &per_clk[0],
.secondary = &uart4_clk[1],
......@@ -753,7 +753,7 @@ struct clk uart4_clk[] = {
struct clk uart5_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 4,
.parent = &per_clk[0],
.secondary = &uart5_clk[1],
......@@ -770,7 +770,7 @@ struct clk uart5_clk[] = {
struct clk uart6_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 5,
.parent = &per_clk[0],
.secondary = &uart6_clk[1],
......@@ -1110,7 +1110,7 @@ static struct clk ssi2_clk[] = {
};
static struct clk nfc_clk = {
.name = "nfc_clk",
.name = "nfc",
.parent = &cpu_clk,
.get_rate = _clk_nfc_recalc,
.enable = _clk_enable,
......@@ -1128,7 +1128,7 @@ static struct clk vpu_clk = {
};
static struct clk dma_clk = {
.name = "dma_clk",
.name = "dma",
.parent = &ahb_clk,
.enable = _clk_dma_enable,
.disable = _clk_dma_disable,
......@@ -1260,7 +1260,7 @@ static struct clk kpp_clk = {
};
static struct clk owire_clk = {
.name = "owire_clk",
.name = "owire",
.parent = &ipg_clk,
.enable = _clk_enable,
.enable_reg = CCM_PCCR0,
......
......@@ -593,7 +593,7 @@ static struct clk epit_clk[] = {
};
static struct clk nfc_clk = {
.name = "nfc_clk",
.name = "nfc",
.parent = &ahb_clk,
.get_rate = _clk_nfc_get_rate,
};
......@@ -667,7 +667,7 @@ static struct clk csi_clk = {
static struct clk uart_clk[] = {
{
.name = "uart_clk",
.name = "uart",
.id = 0,
.parent = &perclk_clk,
.enable = _clk_enable,
......@@ -675,7 +675,7 @@ static struct clk uart_clk[] = {
.enable_shift = MXC_CCM_CGR0_UART1_OFFSET,
.disable = _clk_disable,},
{
.name = "uart_clk",
.name = "uart",
.id = 1,
.parent = &perclk_clk,
.enable = _clk_enable,
......@@ -683,7 +683,7 @@ static struct clk uart_clk[] = {
.enable_shift = MXC_CCM_CGR0_UART2_OFFSET,
.disable = _clk_disable,},
{
.name = "uart_clk",
.name = "uart",
.id = 2,
.parent = &perclk_clk,
.enable = _clk_enable,
......@@ -691,7 +691,7 @@ static struct clk uart_clk[] = {
.enable_shift = MXC_CCM_CGR1_UART3_OFFSET,
.disable = _clk_disable,},
{
.name = "uart_clk",
.name = "uart",
.id = 3,
.parent = &perclk_clk,
.enable = _clk_enable,
......@@ -699,7 +699,7 @@ static struct clk uart_clk[] = {
.enable_shift = MXC_CCM_CGR1_UART4_OFFSET,
.disable = _clk_disable,},
{
.name = "uart_clk",
.name = "uart",
.id = 4,
.parent = &perclk_clk,
.enable = _clk_enable,
......@@ -736,7 +736,7 @@ static struct clk i2c_clk[] = {
};
static struct clk owire_clk = {
.name = "owire_clk",
.name = "owire",
.parent = &perclk_clk,
.enable_reg = MXC_CCM_CGR1,
.enable_shift = MXC_CCM_CGR1_OWIRE_OFFSET,
......
......@@ -802,7 +802,7 @@ static int __init imx_dma_init(void)
int ret = 0;
int i;
dma_clk = clk_get(NULL, "dma_clk");
dma_clk = clk_get(NULL, "dma");
clk_enable(dma_clk);
/* reset DMA module */
......
......@@ -880,7 +880,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
this->read_buf = mxc_nand_read_buf;
this->verify_buf = mxc_nand_verify_buf;
host->clk = clk_get(&pdev->dev, "nfc_clk");
host->clk = clk_get(&pdev->dev, "nfc");
if (IS_ERR(host->clk))
goto eclk;
......
......@@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->timer.function = imx_timeout;
sport->timer.data = (unsigned long)sport;
sport->clk = clk_get(&pdev->dev, "uart_clk");
sport->clk = clk_get(&pdev->dev, "uart");
if (IS_ERR(sport->clk)) {
ret = PTR_ERR(sport->clk);
goto unmap;
......
......@@ -116,7 +116,7 @@ static int __init mxc_w1_probe(struct platform_device *pdev)
if (!mdev)
return -ENOMEM;
mdev->clk = clk_get(&pdev->dev, "owire_clk");
mdev->clk = clk_get(&pdev->dev, "owire");
if (!mdev->clk) {
err = -ENODEV;
goto failed_clk;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册