提交 e64877dc 编写于 作者: W Will Deacon

ARM: hw_breakpoint: only clear OS lock when implemented on v7

The OS save and restore register are optional in debug architecture v7,
so check the status register before attempting to clear the OS lock.
Tested-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
上级 3d70f8c6
......@@ -906,7 +906,7 @@ static struct undef_hook debug_reg_hook = {
static void reset_ctrl_regs(void *unused)
{
int i, raw_num_brps, err = 0, cpu = smp_processor_id();
u32 dbg_power;
u32 val;
/*
* v7 debug contains save and restore registers so that debug state
......@@ -926,16 +926,23 @@ static void reset_ctrl_regs(void *unused)
* Ensure sticky power-down is clear (i.e. debug logic is
* powered up).
*/
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
if ((dbg_power & 0x1) == 0)
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (val));
if ((val & 0x1) == 0)
err = -EPERM;
/*
* Check whether we implement OS save and restore.
*/
asm volatile("mrc p14, 0, %0, c1, c1, 4" : "=r" (val));
if ((val & 0x9) == 0)
goto clear_vcr;
break;
case ARM_DEBUG_ARCH_V7_1:
/*
* Ensure the OS double lock is clear.
*/
asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
if ((dbg_power & 0x1) == 1)
asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (val));
if ((val & 0x1) == 1)
err = -EPERM;
break;
}
......@@ -947,7 +954,7 @@ static void reset_ctrl_regs(void *unused)
}
/*
* Unconditionally clear the lock by writing a value
* Unconditionally clear the OS lock by writing a value
* other than 0xC5ACCE55 to the access register.
*/
asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
......@@ -957,6 +964,7 @@ static void reset_ctrl_regs(void *unused)
* Clear any configured vector-catch events before
* enabling monitor mode.
*/
clear_vcr:
asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
isb();
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册