提交 e57aa839 编写于 作者: F Fengguang Wu 提交者: Linus Torvalds

convert ill defined log2() to ilog2()

It's *wrong* to have
			#define log2(n) ffz(~(n))
It should be *reversed*:
			#define log2(n) flz(~(n))
or
			#define log2(n) fls(n)
or just use
			ilog2(n) defined in linux/log2.h.

This patch follows the last solution, recommended by Andrew Morton.

Cc: <linux-ext4@vger.kernel.org>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Chris Ahna <christopher.j.ahna@intel.com>
Cc: David Mosberger-Tang <davidm@hpl.hp.com>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NFengguang Wu <wfg@mail.ustc.edu.cn>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 bf020cb7
......@@ -14,15 +14,12 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <linux/log2.h>
#include <asm/acpi-ext.h>
#include "agp.h"
#ifndef log2
#define log2(x) ffz(~(x))
#endif
#define HP_ZX1_IOC_OFFSET 0x1000 /* ACPI reports SBA, we want IOC */
/* HP ZX1 IOC registers */
......@@ -257,7 +254,7 @@ hp_zx1_configure (void)
readl(hp->ioc_regs+HP_ZX1_IMASK);
writel(hp->iova_base|1, hp->ioc_regs+HP_ZX1_IBASE);
readl(hp->ioc_regs+HP_ZX1_IBASE);
writel(hp->iova_base|log2(HP_ZX1_IOVA_SIZE), hp->ioc_regs+HP_ZX1_PCOM);
writel(hp->iova_base|ilog2(HP_ZX1_IOVA_SIZE), hp->ioc_regs+HP_ZX1_PCOM);
readl(hp->ioc_regs+HP_ZX1_PCOM);
}
......@@ -285,7 +282,7 @@ hp_zx1_tlbflush (struct agp_memory *mem)
{
struct _hp_private *hp = &hp_private;
writeq(hp->gart_base | log2(hp->gart_size), hp->ioc_regs+HP_ZX1_PCOM);
writeq(hp->gart_base | ilog2(hp->gart_size), hp->ioc_regs+HP_ZX1_PCOM);
readq(hp->ioc_regs+HP_ZX1_PCOM);
}
......
......@@ -13,6 +13,7 @@
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/agp_backend.h>
#include <linux/log2.h>
#include "agp.h"
......@@ -59,8 +60,6 @@
*/
#define WR_FLUSH_GATT(index) RD_GATT(index)
#define log2(x) ffz(~(x))
static struct {
void *gatt; /* ioremap'd GATT area */
......@@ -148,7 +147,7 @@ static int i460_fetch_size (void)
* values[i].size.
*/
values[i].num_entries = (values[i].size << 8) >> (I460_IO_PAGE_SHIFT - 12);
values[i].page_order = log2((sizeof(u32)*values[i].num_entries) >> PAGE_SHIFT);
values[i].page_order = ilog2((sizeof(u32)*values[i].num_entries) >> PAGE_SHIFT);
}
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
......
......@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/klist.h>
#include <linux/agp_backend.h>
#include <linux/log2.h>
#include <asm-parisc/parisc-device.h>
#include <asm-parisc/ropes.h>
......@@ -27,10 +28,6 @@
#define DRVNAME "quicksilver"
#define DRVPFX DRVNAME ": "
#ifndef log2
#define log2(x) ffz(~(x))
#endif
#define AGP8X_MODE_BIT 3
#define AGP8X_MODE (1 << AGP8X_MODE_BIT)
......@@ -92,7 +89,7 @@ parisc_agp_tlbflush(struct agp_memory *mem)
{
struct _parisc_agp_info *info = &parisc_agp_info;
writeq(info->gart_base | log2(info->gart_size), info->ioc_regs+IOC_PCOM);
writeq(info->gart_base | ilog2(info->gart_size), info->ioc_regs+IOC_PCOM);
readq(info->ioc_regs+IOC_PCOM); /* flush */
}
......
......@@ -1415,8 +1415,6 @@ static void ext4_orphan_cleanup (struct super_block * sb,
sb->s_flags = s_flags; /* Restore MS_RDONLY status */
}
#define log2(n) ffz(~(n))
/*
* Maximal file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks.
......@@ -1689,8 +1687,8 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent)
sbi->s_desc_per_block = blocksize / EXT4_DESC_SIZE(sb);
sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state);
sbi->s_addr_per_block_bits = log2(EXT4_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits = log2(EXT4_DESC_PER_BLOCK(sb));
sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
for (i=0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册