提交 e5417e49 编写于 作者: I Ian Abbott 提交者: Greg Kroah-Hartman

staging: comedi: s526: add macros for counter control reg values

The driver writes a couple of literal values to the counter
control/status register, 0x8000 to reset the counter, and 0x4000 to load
the counter from preload register 0.  Add a bunch of macros to define
these values and other values for the register, based on the Sensoray
526 manual.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Reviewed-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 479bd5ed
......@@ -139,7 +139,36 @@
#define S526_GPCT_MODE_PR_SELECT_MASK S526_GPCT_MODE_PR_SELECT(0x1)
#define S526_GPCT_MODE_PR_SELECT_PR0 S526_GPCT_MODE_PR_SELECT(0)
#define S526_GPCT_MODE_PR_SELECT_PR1 S526_GPCT_MODE_PR_SELECT(1)
/* Control/Status - R = readable, W = writeable, C = write 1 to clear */
#define S526_GPCT_CTRL_REG(x) (0x18 + ((x) * 8))
#define S526_GPCT_CTRL_EV_STATUS(x) ((x) << 0) /* RC */
#define S526_GPCT_CTRL_EV_STATUS_MASK S526_GPCT_EV_STATUS(0xf)
#define S526_GPCT_CTRL_EV_STATUS_NONE S526_GPCT_EV_STATUS(0)
/* these 4 bits can be OR'ed */
#define S526_GPCT_CTRL_EV_STATUS_ECAP S526_GPCT_EV_STATUS(0x1)
#define S526_GPCT_CTRL_EV_STATUS_ICAPN S526_GPCT_EV_STATUS(0x2)
#define S526_GPCT_CTRL_EV_STATUS_ICAPP S526_GPCT_EV_STATUS(0x4)
#define S526_GPCT_CTRL_EV_STATUS_RCAP S526_GPCT_EV_STATUS(0x8)
#define S526_GPCT_CTRL_COUT_STATUS BIT(4) /* R */
#define S526_GPCT_CTRL_INDEX_STATUS BIT(5) /* R */
#define S525_GPCT_CTRL_INTEN(x) ((x) << 6) /* W */
#define S525_GPCT_CTRL_INTEN_MASK S526_GPCT_CTRL_INTEN(0xf)
#define S525_GPCT_CTRL_INTEN_NONE S526_GPCT_CTRL_INTEN(0)
/* these 4 bits can be OR'ed */
#define S525_GPCT_CTRL_INTEN_ERROR S526_GPCT_CTRL_INTEN(0x1)
#define S525_GPCT_CTRL_INTEN_IXFALL S526_GPCT_CTRL_INTEN(0x2)
#define S525_GPCT_CTRL_INTEN_IXRISE S526_GPCT_CTRL_INTEN(0x4)
#define S525_GPCT_CTRL_INTEN_RO S526_GPCT_CTRL_INTEN(0x8)
#define S525_GPCT_CTRL_LATCH_SEL(x) ((x) << 10) /* W */
#define S525_GPCT_CTRL_LATCH_SEL_MASK S526_GPCT_CTRL_LATCH_SEL(0x7)
#define S525_GPCT_CTRL_LATCH_SEL_NONE S526_GPCT_CTRL_LATCH_SEL(0)
/* these 3 bits can be OR'ed */
#define S525_GPCT_CTRL_LATCH_SEL_IXFALL S526_GPCT_CTRL_LATCH_SEL(0x1)
#define S525_GPCT_CTRL_LATCH_SEL_IXRISE S526_GPCT_CTRL_LATCH_SEL(0x2)
#define S525_GPCT_CTRL_LATCH_SEL_ITIMER S526_GPCT_CTRL_LATCH_SEL(0x4)
#define S525_GPCT_CTRL_CT_ARM BIT(13) /* W */
#define S525_GPCT_CTRL_CT_LOAD BIT(14) /* W */
#define S526_GPCT_CTRL_CT_RESET BIT(15) /* W */
#define S526_EEPROM_DATA_REG 0x32
#define S526_EEPROM_CTRL_REG 0x34
#define S526_EEPROM_CTRL_ADDR(x) (((x) & 0x3f) << 3)
......@@ -218,10 +247,12 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
if ((val & S526_GPCT_MODE_AUTOLOAD_MASK) ==
S526_GPCT_MODE_AUTOLOAD_NONE) {
/* Reset the counter */
outw(0x8000, dev->iobase + S526_GPCT_CTRL_REG(chan));
outw(S526_GPCT_CTRL_CT_RESET,
dev->iobase + S526_GPCT_CTRL_REG(chan));
/*
* Load the counter from PR0
* outw(0x4000, dev->iobase + S526_GPCT_CTRL_REG(chan));
* outw(S526_GPCT_CTRL_CT_LOAD,
* dev->iobase + S526_GPCT_CTRL_REG(chan));
*/
}
#else
......@@ -265,9 +296,11 @@ static int s526_gpct_insn_config(struct comedi_device *dev,
if ((val & S526_GPCT_MODE_AUTOLOAD_MASK) ==
S526_GPCT_MODE_AUTOLOAD_NONE) {
/* Reset the counter */
outw(0x8000, dev->iobase + S526_GPCT_CTRL_REG(chan));
outw(S526_GPCT_CTRL_CT_RESET,
dev->iobase + S526_GPCT_CTRL_REG(chan));
/* Load the counter from PR0 */
outw(0x4000, dev->iobase + S526_GPCT_CTRL_REG(chan));
outw(S526_GPCT_CTRL_CT_LOAD,
dev->iobase + S526_GPCT_CTRL_REG(chan));
}
#endif
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册