提交 e52cde71 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: dsa: dsa_loop: Make dynamic debugging helpful

Remove redundant debug prints from phy_read/write since we can trace those
calls through trace events. Enhance dynamic debug prints to print arguments
which helps figuring how what is going on at the driver level with higher level
configuration interfaces.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 910714f1
......@@ -67,7 +67,7 @@ static struct phy_device *phydevs[PHY_MAX_ADDR];
static enum dsa_tag_protocol dsa_loop_get_protocol(struct dsa_switch *ds,
int port)
{
dev_dbg(ds->dev, "%s\n", __func__);
dev_dbg(ds->dev, "%s: port: %d\n", __func__, port);
return DSA_TAG_PROTO_NONE;
}
......@@ -124,8 +124,6 @@ static int dsa_loop_phy_read(struct dsa_switch *ds, int port, int regnum)
struct mii_bus *bus = ps->bus;
int ret;
dev_dbg(ds->dev, "%s\n", __func__);
ret = mdiobus_read_nested(bus, ps->port_base + port, regnum);
if (ret < 0)
ps->ports[port].mib[DSA_LOOP_PHY_READ_ERR].val++;
......@@ -142,8 +140,6 @@ static int dsa_loop_phy_write(struct dsa_switch *ds, int port,
struct mii_bus *bus = ps->bus;
int ret;
dev_dbg(ds->dev, "%s\n", __func__);
ret = mdiobus_write_nested(bus, ps->port_base + port, regnum, value);
if (ret < 0)
ps->ports[port].mib[DSA_LOOP_PHY_WRITE_ERR].val++;
......@@ -156,7 +152,8 @@ static int dsa_loop_phy_write(struct dsa_switch *ds, int port,
static int dsa_loop_port_bridge_join(struct dsa_switch *ds, int port,
struct net_device *bridge)
{
dev_dbg(ds->dev, "%s\n", __func__);
dev_dbg(ds->dev, "%s: port: %d, bridge: %s\n",
__func__, port, bridge->name);
return 0;
}
......@@ -164,19 +161,22 @@ static int dsa_loop_port_bridge_join(struct dsa_switch *ds, int port,
static void dsa_loop_port_bridge_leave(struct dsa_switch *ds, int port,
struct net_device *bridge)
{
dev_dbg(ds->dev, "%s\n", __func__);
dev_dbg(ds->dev, "%s: port: %d, bridge: %s\n",
__func__, port, bridge->name);
}
static void dsa_loop_port_stp_state_set(struct dsa_switch *ds, int port,
u8 state)
{
dev_dbg(ds->dev, "%s\n", __func__);
dev_dbg(ds->dev, "%s: port: %d, state: %d\n",
__func__, port, state);
}
static int dsa_loop_port_vlan_filtering(struct dsa_switch *ds, int port,
bool vlan_filtering)
{
dev_dbg(ds->dev, "%s\n", __func__);
dev_dbg(ds->dev, "%s: port: %d, vlan_filtering: %d\n",
__func__, port, vlan_filtering);
return 0;
}
......@@ -188,7 +188,8 @@ dsa_loop_port_vlan_prepare(struct dsa_switch *ds, int port,
struct dsa_loop_priv *ps = ds->priv;
struct mii_bus *bus = ps->bus;
dev_dbg(ds->dev, "%s\n", __func__);
dev_dbg(ds->dev, "%s: port: %d, vlan: %d-%d",
__func__, port, vlan->vid_begin, vlan->vid_end);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
......@@ -209,8 +210,6 @@ static void dsa_loop_port_vlan_add(struct dsa_switch *ds, int port,
struct dsa_loop_vlan *vl;
u16 vid;
dev_dbg(ds->dev, "%s\n", __func__);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
......@@ -222,6 +221,9 @@ static void dsa_loop_port_vlan_add(struct dsa_switch *ds, int port,
vl->untagged |= BIT(port);
else
vl->untagged &= ~BIT(port);
dev_dbg(ds->dev, "%s: port: %d vlan: %d, %stagged, pvid: %d\n",
__func__, port, vid, untagged ? "un" : "", pvid);
}
if (pvid)
......@@ -237,8 +239,6 @@ static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port,
struct dsa_loop_vlan *vl;
u16 vid, pvid = ps->pvid;
dev_dbg(ds->dev, "%s\n", __func__);
/* Just do a sleeping operation to make lockdep checks effective */
mdiobus_read(bus, ps->port_base + port, MII_BMSR);
......@@ -251,6 +251,9 @@ static int dsa_loop_port_vlan_del(struct dsa_switch *ds, int port,
if (pvid == vid)
pvid = 1;
dev_dbg(ds->dev, "%s: port: %d vlan: %d, %stagged, pvid: %d\n",
__func__, port, vid, untagged ? "un" : "", pvid);
}
ps->pvid = pvid;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册