PM / OPP: rename header to linux/pm_opp.h

Since Operating Performance Points (OPP) functions are specific
to device specific power management, be specific and rename opp.h
to pm_opp.h
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NNishanth Menon <nm@ti.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation/power/opp.txt

@@ -42,7 +42,7 @@ We can represent these as three OPPs as the following {Hz, uV} tuples:
 
 OPP library provides a set of helper functions to organize and query the OPP
 information. The library is located in drivers/base/power/opp.c and the header
-is located in include/linux/opp.h. OPP library can be enabled by enabling
+is located in include/linux/pm_opp.h. OPP library can be enabled by enabling
 CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on
 CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to
 optionally boot at a certain OPP without needing cpufreq.

arch/arm/mach-imx/mach-imx6q.c

@@ -25,7 +25,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/phy.h>
 #include <linux/reboot.h>
 #include <linux/regmap.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -25,7 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 
 #include <linux/mtd/mtd.h>

arch/arm/mach-omap2/omap-pm.h

@@ -17,7 +17,7 @@
 #include <linux/device.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 
 /*
  * agent_id values for use with omap_pm_set_min_bus_tput():

arch/arm/mach-omap2/opp.c

@@ -17,7 +17,7 @@
  * GNU General Public License for more details.
  */
 #include <linux/module.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 
 #include "omap_device.h"

arch/arm/mach-omap2/pm.c

@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/err.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/export.h>
 #include <linux/suspend.h>
 #include <linux/cpu.h>

drivers/base/power/opp.c

@@ -21,7 +21,7 @@
 #include <linux/list.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/of.h>
 #include <linux/export.h>
 

drivers/cpufreq/arm_big_little.c

@@ -25,7 +25,7 @@
 #include <linux/cpumask.h>
 #include <linux/export.h>
 #include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/topology.h>
 #include <linux/types.h>

drivers/cpufreq/arm_big_little_dt.c

@@ -24,7 +24,7 @@
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>

drivers/cpufreq/cpufreq-cpu0.c

@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>

drivers/cpufreq/exynos5440-cpufreq.c

@@ -20,7 +20,7 @@
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 

drivers/cpufreq/imx6q-cpufreq.c

@@ -13,7 +13,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 

drivers/cpufreq/omap-cpufreq.c

@@ -22,7 +22,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/cpu.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>

drivers/devfreq/devfreq.c

@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/devfreq.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>

drivers/devfreq/exynos/exynos4_bus.c

@@ -19,7 +19,7 @@
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/suspend.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/devfreq.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>

drivers/devfreq/exynos/exynos5_bus.c

@@ -15,10 +15,10 @@
 #include <linux/module.h>
 #include <linux/devfreq.h>
 #include <linux/io.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>

include/linux/devfreq.h

@@ -15,7 +15,7 @@
 
 #include <linux/device.h>
 #include <linux/notifier.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 
 #define DEVFREQ_NAME_LEN 16