提交 e4c6a360 编写于 作者: M Magnus Damm 提交者: Paul Mundt

sh: add reg_base member to pci_channel

Store the base address of the pci host controller registers in struct
pci_channel and use the address in pci_read_reg() and pci_write_reg().
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 b6706ef1
......@@ -121,8 +121,8 @@ int __init sh4_pci_check_direct(struct pci_channel *chan)
if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) {
pci_write_reg(chan, tmp, SH4_PCIPAR);
printk(KERN_INFO "PCI: Using configuration type 1\n");
request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1");
request_region(chan->reg_base + SH4_PCIPAR, 8,
"PCI conf1");
return 0;
}
......
......@@ -171,13 +171,13 @@ struct sh4_pci_address_map {
static inline void pci_write_reg(struct pci_channel *chan,
unsigned long val, unsigned long reg)
{
ctrl_outl(val, PCI_REG(reg));
ctrl_outl(val, chan->reg_base + reg);
}
static inline unsigned long pci_read_reg(struct pci_channel *chan,
unsigned long reg)
{
return ctrl_inl(PCI_REG(reg));
return ctrl_inl(chan->reg_base + reg);
}
#endif /* __PCI_SH4_H */
......@@ -39,6 +39,8 @@ int __init sh7751_pci_init(struct pci_channel *chan)
pr_debug("PCI: Starting intialization.\n");
chan->reg_base = 0xfe200000;
/* check for SH7751/SH7751R hardware */
id = pci_read_reg(chan, SH7751_PCICONF0);
if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
......
......@@ -26,7 +26,6 @@
#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */
#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */
#define PCI_REG(n) (SH7751_PCIREG_BASE+ n)
#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */
#define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */
......
......@@ -52,6 +52,8 @@ int __init sh7780_pci_init(struct pci_channel *chan)
pr_debug("PCI: Starting intialization.\n");
chan->reg_base = 0xfe040000;
ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
/* check for SH7780/SH7780R hardware */
......
......@@ -35,7 +35,6 @@
#define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */
#define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */
#define PCI_REG(n) (SH7780_PCIREG_BASE+n)
/* SH7780 PCI Config Registers */
#define SH7780_PCIVID 0x000 /* Vendor ID */
......
......@@ -24,6 +24,7 @@ struct pci_channel {
int first_devfn;
int last_devfn;
int enabled;
unsigned long reg_base;
};
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册