提交 e4bb688d 编写于 作者: S Scott Wood 提交者: Paul Mackerras

[POWERPC] bootwrapper: Fix array handling in dt_xlate_reg().

This fixes a few bugs in how dt_xlate_reg() handles address arrays:

1. copy_val() was copying into the wrong end of the array, resulting
in random stack garbage at the other end.
2. dt_xlate_reg() was getting the result from the wrong end of the array.
3. add_reg() and sub_reg() were treating the arrays as
little-endian rather than big-endian.
4. add_reg() only returned an error on a carry out of the entire
array, rather than out of the naddr portion.
5. The requested reg resource was checked to see if it exceeded
the size of the reg property, but not to see if it exceeded the
size of the buffer.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 3c5f6162
......@@ -123,15 +123,17 @@ static void get_reg_format(void *node, u32 *naddr, u32 *nsize)
static void copy_val(u32 *dest, u32 *src, int naddr)
{
memset(dest, 0, (MAX_ADDR_CELLS - naddr) * 4);
memcpy(dest, src, naddr * 4);
int pad = MAX_ADDR_CELLS - naddr;
memset(dest, 0, pad * 4);
memcpy(dest + pad, src, naddr * 4);
}
static int sub_reg(u32 *reg, u32 *sub)
{
int i, borrow = 0;
for (i = 0; i < MAX_ADDR_CELLS; i++) {
for (i = MAX_ADDR_CELLS - 1; i >= 0; i--) {
int prev_borrow = borrow;
borrow = reg[i] < sub[i] + prev_borrow;
reg[i] -= sub[i] + prev_borrow;
......@@ -140,11 +142,11 @@ static int sub_reg(u32 *reg, u32 *sub)
return !borrow;
}
static int add_reg(u32 *reg, u32 *add)
static int add_reg(u32 *reg, u32 *add, int naddr)
{
int i, carry = 0;
for (i = 0; i < MAX_ADDR_CELLS; i++) {
for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) {
u64 tmp = (u64)reg[i] + add[i] + carry;
carry = tmp >> 32;
reg[i] = (u32)tmp;
......@@ -228,7 +230,8 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr,
buflen = getprop(node, "reg", buf, sizeof(buf)) / 4;
offset = (naddr + nsize) * res;
if (buflen < offset + naddr + nsize)
if (buflen < offset + naddr + nsize ||
sizeof(buf) < offset + naddr + nsize)
return 0;
copy_val(last_addr, buf + offset, naddr);
......@@ -263,18 +266,14 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr,
copy_val(this_addr, buf + offset + prev_naddr, naddr);
if (!add_reg(last_addr, this_addr))
if (!add_reg(last_addr, this_addr, naddr))
return 0;
}
if (naddr > 2)
return 0;
ret_addr = last_addr[0];
if (naddr == 2) {
ret_addr <<= 32;
ret_addr |= last_addr[1];
}
ret_addr = ((u64)last_addr[2] << 32) | last_addr[3];
if (sizeof(void *) == 4 &&
(ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL ||
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册