提交 e4b081f5 编写于 作者: C Claudiu Manoil 提交者: David S. Miller

net/fsl_pq_mdio: Replace spin_event_timeout() with arch independent

spin_event_timeout() is PPC dependent, use an arch independent
equivalent instead.
Signed-off-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 f5bbd262
......@@ -104,7 +104,7 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
{
struct fsl_pq_mdio_priv *priv = bus->priv;
struct fsl_pq_mii __iomem *regs = priv->regs;
u32 status;
unsigned int timeout;
/* Set the PHY address and the register address we want to write */
iowrite32be((mii_id << 8) | regnum, &regs->miimadd);
......@@ -113,10 +113,13 @@ static int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
iowrite32be(value, &regs->miimcon);
/* Wait for the transaction to finish */
status = spin_event_timeout(!(ioread32be(&regs->miimind) &
MIIMIND_BUSY), MII_TIMEOUT, 0);
timeout = MII_TIMEOUT;
while ((ioread32be(&regs->miimind) & MIIMIND_BUSY) && timeout) {
cpu_relax();
timeout--;
}
return status ? 0 : -ETIMEDOUT;
return timeout ? 0 : -ETIMEDOUT;
}
/*
......@@ -133,7 +136,7 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct fsl_pq_mdio_priv *priv = bus->priv;
struct fsl_pq_mii __iomem *regs = priv->regs;
u32 status;
unsigned int timeout;
u16 value;
/* Set the PHY address and the register address we want to read */
......@@ -144,10 +147,14 @@ static int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
iowrite32be(MII_READ_COMMAND, &regs->miimcom);
/* Wait for the transaction to finish, normally less than 100us */
status = spin_event_timeout(!(ioread32be(&regs->miimind) &
(MIIMIND_NOTVALID | MIIMIND_BUSY)),
MII_TIMEOUT, 0);
if (!status)
timeout = MII_TIMEOUT;
while ((ioread32be(&regs->miimind) &
(MIIMIND_NOTVALID | MIIMIND_BUSY)) && timeout) {
cpu_relax();
timeout--;
}
if (!timeout)
return -ETIMEDOUT;
/* Grab the value of the register from miimstat */
......@@ -162,7 +169,7 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
{
struct fsl_pq_mdio_priv *priv = bus->priv;
struct fsl_pq_mii __iomem *regs = priv->regs;
u32 status;
unsigned int timeout;
mutex_lock(&bus->mdio_lock);
......@@ -173,12 +180,15 @@ static int fsl_pq_mdio_reset(struct mii_bus *bus)
iowrite32be(MIIMCFG_INIT_VALUE, &regs->miimcfg);
/* Wait until the bus is free */
status = spin_event_timeout(!(ioread32be(&regs->miimind) &
MIIMIND_BUSY), MII_TIMEOUT, 0);
timeout = MII_TIMEOUT;
while ((ioread32be(&regs->miimind) & MIIMIND_BUSY) && timeout) {
cpu_relax();
timeout--;
}
mutex_unlock(&bus->mdio_lock);
if (!status) {
if (!timeout) {
dev_err(&bus->dev, "timeout waiting for MII bus\n");
return -EBUSY;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册