提交 e43e0df1 编写于 作者: W Wolfram Sang 提交者: Wolfram Sang

i2c: rcar: make sure clocks are on when doing clock calculation

When calculating the bus speed, the clock should be on, of course. Most
bootloaders left them on, so this went unnoticed so far.

Move the ioremapping out of this clock-enabled-block and prepare for
adding hw initialization there, too.
Reported-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
上级 31ade3b8
......@@ -650,19 +650,23 @@ static int rcar_i2c_probe(struct platform_device *pdev)
return PTR_ERR(priv->clk);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->io))
return PTR_ERR(priv->io);
bus_speed = 100000; /* default 100 kHz */
of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed);
priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data;
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
if (ret < 0)
return ret;
goto out_pm_put;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->io = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->io))
return PTR_ERR(priv->io);
pm_runtime_put(dev);
irq = platform_get_irq(pdev, 0);
init_waitqueue_head(&priv->wait);
......@@ -682,22 +686,26 @@ static int rcar_i2c_probe(struct platform_device *pdev)
dev_name(dev), priv);
if (ret < 0) {
dev_err(dev, "cannot get irq %d\n", irq);
return ret;
goto out_pm_disable;
}
pm_runtime_enable(dev);
platform_set_drvdata(pdev, priv);
ret = i2c_add_numbered_adapter(adap);
if (ret < 0) {
dev_err(dev, "reg adap failed: %d\n", ret);
pm_runtime_disable(dev);
return ret;
goto out_pm_disable;
}
dev_info(dev, "probed\n");
return 0;
out_pm_put:
pm_runtime_put(dev);
out_pm_disable:
pm_runtime_disable(dev);
return ret;
}
static int rcar_i2c_remove(struct platform_device *pdev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册