Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
“efddf9ea9a319a361ecb2ad4030b15355f53c061”上不存在“...fluid/inference/git@gitcode.net:BaiXuePrincess/Paddle.git”
提交 e3b3757b 编写于 作者: T Takashi Iwai
浏览文件
操作

ALSA: 6fire: Use standard printk helpers 

Convert with dev_err() and co from snd_printk(), etc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 0ba41d91
隐藏空白更改
内联 并排
Showing with 86 addition and 72 deletion
sound/usb/6fire/chip.c
浏览文件 @ e3b3757b
......@@ -106,7 +106,7 @@ static int usb6fire_chip_probe(struct usb_interface *intf,
}
if (regidx < 0) {
mutex_unlock(&register_mutex);
snd_printk(KERN_ERR PREFIX "too many cards registered.\n");
dev_err(&intf->dev, "too many cards registered.\n");
return -ENODEV;
}
devices[regidx] = device;
......@@ -121,13 +121,13 @@ static int usb6fire_chip_probe(struct usb_interface *intf,
/* if we are here, card can be registered in alsa. */
if (usb_set_interface(device, 0, 0) != 0) {
snd_printk(KERN_ERR PREFIX "can't set first interface.\n");
dev_err(&intf->dev, "can't set first interface.\n");
return -EIO;
}
ret = snd_card_new(&intf->dev, index[regidx], id[regidx],
THIS_MODULE, sizeof(struct sfire_chip), &card);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "cannot create alsa card.\n");
dev_err(&intf->dev, "cannot create alsa card.\n");
return ret;
}
strcpy(card->driver, "6FireUSB");
......@@ -168,7 +168,7 @@ static int usb6fire_chip_probe(struct usb_interface *intf,
ret = snd_card_register(card);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "cannot register card.");
dev_err(&intf->dev, "cannot register card.");
usb6fire_chip_destroy(chip);
return ret;
}
......
sound/usb/6fire/comm.c
浏览文件 @ e3b3757b
......@@ -51,7 +51,7 @@ static void usb6fire_comm_receiver_handler(struct urb *urb)
urb->status = 0;
urb->actual_length = 0;
if (usb_submit_urb(urb, GFP_ATOMIC) < 0)
snd_printk(KERN_WARNING PREFIX
dev_warn(&urb->dev->dev,
"comm data receiver aborted.\n");
}
}
......@@ -179,7 +179,7 @@ int usb6fire_comm_init(struct sfire_chip *chip)
if (ret < 0) {
kfree(rt->receiver_buffer);
kfree(rt);
snd_printk(KERN_ERR PREFIX "cannot create comm data receiver.");
dev_err(&chip->dev->dev, "cannot create comm data receiver.");
return ret;
}
chip->comm = rt;
......
sound/usb/6fire/control.c
浏览文件 @ e3b3757b
......@@ -194,7 +194,8 @@ static int usb6fire_control_output_vol_put(struct snd_kcontrol *kcontrol,
int changed = 0;
if (ch > 4) {
snd_printk(KERN_ERR PREFIX "Invalid channel in volume control.");
dev_err(&rt->chip->dev->dev,
"Invalid channel in volume control.");
return -EINVAL;
}
......@@ -222,7 +223,8 @@ static int usb6fire_control_output_vol_get(struct snd_kcontrol *kcontrol,
unsigned int ch = kcontrol->private_value;
if (ch > 4) {
snd_printk(KERN_ERR PREFIX "Invalid channel in volume control.");
dev_err(&rt->chip->dev->dev,
"Invalid channel in volume control.");
return -EINVAL;
}
......@@ -240,7 +242,8 @@ static int usb6fire_control_output_mute_put(struct snd_kcontrol *kcontrol,
u8 value = 0;
if (ch > 4) {
snd_printk(KERN_ERR PREFIX "Invalid channel in volume control.");
dev_err(&rt->chip->dev->dev,
"Invalid channel in volume control.");
return -EINVAL;
}
......@@ -265,7 +268,8 @@ static int usb6fire_control_output_mute_get(struct snd_kcontrol *kcontrol,
u8 value = rt->output_mute >> ch;
if (ch > 4) {
snd_printk(KERN_ERR PREFIX "Invalid channel in volume control.");
dev_err(&rt->chip->dev->dev,
"Invalid channel in volume control.");
return -EINVAL;
}
......@@ -594,14 +598,14 @@ int usb6fire_control_init(struct sfire_chip *chip)
ret = usb6fire_control_add_virtual(rt, chip->card,
"Master Playback Volume", vol_elements);
if (ret) {
snd_printk(KERN_ERR PREFIX "cannot add control.\n");
dev_err(&chip->dev->dev, "cannot add control.\n");
kfree(rt);
return ret;
}
ret = usb6fire_control_add_virtual(rt, chip->card,
"Master Playback Switch", mute_elements);
if (ret) {
snd_printk(KERN_ERR PREFIX "cannot add control.\n");
dev_err(&chip->dev->dev, "cannot add control.\n");
kfree(rt);
return ret;
}
......@@ -611,7 +615,7 @@ int usb6fire_control_init(struct sfire_chip *chip)
ret = snd_ctl_add(chip->card, snd_ctl_new1(&elements[i], rt));
if (ret < 0) {
kfree(rt);
snd_printk(KERN_ERR PREFIX "cannot add control.\n");
dev_err(&chip->dev->dev, "cannot add control.\n");
return ret;
}
i++;
......
sound/usb/6fire/firmware.c
浏览文件 @ e3b3757b
......@@ -219,16 +219,16 @@ static int usb6fire_fw_ezusb_upload(
ret = request_firmware(&fw, fwname, &device->dev);
if (ret < 0) {
kfree(rec);
snd_printk(KERN_ERR PREFIX "error requesting ezusb "
"firmware %s.\n", fwname);
dev_err(&intf->dev,
"error requesting ezusb firmware %s.\n", fwname);
return ret;
}
ret = usb6fire_fw_ihex_init(fw, rec);
if (ret < 0) {
kfree(rec);
release_firmware(fw);
snd_printk(KERN_ERR PREFIX "error validating ezusb "
"firmware %s.\n", fwname);
dev_err(&intf->dev,
"error validating ezusb firmware %s.\n", fwname);
return ret;
}
/* upload firmware image */
......@@ -237,8 +237,9 @@ static int usb6fire_fw_ezusb_upload(
if (ret < 0) {
kfree(rec);
release_firmware(fw);
snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
"firmware %s: begin message.\n", fwname);
dev_err(&intf->dev,
"unable to upload ezusb firmware %s: begin message.\n",
fwname);
return ret;
}
......@@ -248,8 +249,9 @@ static int usb6fire_fw_ezusb_upload(
if (ret < 0) {
kfree(rec);
release_firmware(fw);
snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
"firmware %s: data urb.\n", fwname);
dev_err(&intf->dev,
"unable to upload ezusb firmware %s: data urb.\n",
fwname);
return ret;
}
}
......@@ -260,8 +262,9 @@ static int usb6fire_fw_ezusb_upload(
ret = usb6fire_fw_ezusb_write(device, 0xa0, postaddr,
postdata, postlen);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
"firmware %s: post urb.\n", fwname);
dev_err(&intf->dev,
"unable to upload ezusb firmware %s: post urb.\n",
fwname);
return ret;
}
}
......@@ -269,8 +272,9 @@ static int usb6fire_fw_ezusb_upload(
data = 0x00; /* resume ezusb cpu */
ret = usb6fire_fw_ezusb_write(device, 0xa0, 0xe600, &data, 1);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "unable to upload ezusb "
"firmware %s: end message.\n", fwname);
dev_err(&intf->dev,
"unable to upload ezusb firmware %s: end message.\n",
fwname);
return ret;
}
return 0;
......@@ -292,7 +296,7 @@ static int usb6fire_fw_fpga_upload(
ret = request_firmware(&fw, fwname, &device->dev);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "unable to get fpga firmware %s.\n",
dev_err(&intf->dev, "unable to get fpga firmware %s.\n",
fwname);
kfree(buffer);
return -EIO;
......@@ -305,8 +309,8 @@ static int usb6fire_fw_fpga_upload(
if (ret < 0) {
kfree(buffer);
release_firmware(fw);
snd_printk(KERN_ERR PREFIX "unable to upload fpga firmware: "
"begin urb.\n");
dev_err(&intf->dev,
"unable to upload fpga firmware: begin urb.\n");
return ret;
}
......@@ -318,8 +322,8 @@ static int usb6fire_fw_fpga_upload(
if (ret < 0) {
release_firmware(fw);
kfree(buffer);
snd_printk(KERN_ERR PREFIX "unable to upload fpga "
"firmware: fw urb.\n");
dev_err(&intf->dev,
"unable to upload fpga firmware: fw urb.\n");
return ret;
}
}
......@@ -328,8 +332,8 @@ static int usb6fire_fw_fpga_upload(
ret = usb6fire_fw_ezusb_write(device, 9, 0, NULL, 0);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "unable to upload fpga firmware: "
"end urb.\n");
dev_err(&intf->dev,
"unable to upload fpga firmware: end urb.\n");
return ret;
}
return 0;
......@@ -338,7 +342,7 @@ static int usb6fire_fw_fpga_upload(
/* check, if the firmware version the devices has currently loaded
* is known by this driver. 'version' needs to have 4 bytes version
* info data. */
static int usb6fire_fw_check(u8 *version)
static int usb6fire_fw_check(struct usb_interface *intf, const u8 *version)
{
int i;
......@@ -346,7 +350,7 @@ static int usb6fire_fw_check(u8 *version)
if (!memcmp(version, known_fw_versions + i, 2))
return 0;
snd_printk(KERN_ERR PREFIX "invalid fimware version in device: %4ph. "
dev_err(&intf->dev, "invalid fimware version in device: %4ph. "
"please reconnect to power. if this failure "
"still happens, check your firmware installation.",
version);
......@@ -364,16 +368,16 @@ int usb6fire_fw_init(struct usb_interface *intf)
ret = usb6fire_fw_ezusb_read(device, 1, 0, buffer, 8);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "unable to receive device "
"firmware state.\n");
dev_err(&intf->dev,
"unable to receive device firmware state.\n");
return ret;
}
if (buffer[0] != 0xeb || buffer[1] != 0xaa || buffer[2] != 0x55) {
snd_printk(KERN_ERR PREFIX "unknown device firmware state "
"received from device: ");
dev_err(&intf->dev,
"unknown device firmware state received from device:");
for (i = 0; i < 8; i++)
snd_printk("%02x ", buffer[i]);
snd_printk("\n");
printk(KERN_CONT "%02x ", buffer[i]);
printk(KERN_CONT "\n");
return -EIO;
}
/* do we need fpga loader ezusb firmware? */
......@@ -386,7 +390,7 @@ int usb6fire_fw_init(struct usb_interface *intf)
}
/* do we need fpga firmware and application ezusb firmware? */
else if (buffer[3] == 0x02) {
ret = usb6fire_fw_check(buffer + 4);
ret = usb6fire_fw_check(intf, buffer + 4);
if (ret < 0)
return ret;
ret = usb6fire_fw_fpga_upload(intf, "6fire/dmx6firecf.bin");
......@@ -402,14 +406,14 @@ int usb6fire_fw_init(struct usb_interface *intf)
}
/* all fw loaded? */
else if (buffer[3] == 0x03)
return usb6fire_fw_check(buffer + 4);
return usb6fire_fw_check(intf, buffer + 4);
/* unknown data? */
else {
snd_printk(KERN_ERR PREFIX "unknown device firmware state "
"received from device: ");
dev_err(&intf->dev,
"unknown device firmware state received from device: ");
for (i = 0; i < 8; i++)
snd_printk("%02x ", buffer[i]);
snd_printk("\n");
printk(KERN_CONT "%02x ", buffer[i]);
printk(KERN_CONT "\n");
return -EIO;
}
return 0;
......
sound/usb/6fire/midi.c
浏览文件 @ e3b3757b
......@@ -41,8 +41,9 @@ static void usb6fire_midi_out_handler(struct urb *urb)
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0)
snd_printk(KERN_ERR PREFIX "midi out urb "
"submit failed: %d\n", ret);
dev_err(&urb->dev->dev,
"midi out urb submit failed: %d\n",
ret);
} else /* no more data to transmit */
rt->out = NULL;
}
......@@ -94,8 +95,9 @@ static void usb6fire_midi_out_trigger(
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0)
snd_printk(KERN_ERR PREFIX "midi out urb "
"submit failed: %d\n", ret);
dev_err(&urb->dev->dev,
"midi out urb submit failed: %d\n",
ret);
else
rt->out = alsa_sub;
}
......@@ -181,7 +183,7 @@ int usb6fire_midi_init(struct sfire_chip *chip)
if (ret < 0) {
kfree(rt->out_buffer);
kfree(rt);
snd_printk(KERN_ERR PREFIX "unable to create midi.\n");
dev_err(&chip->dev->dev, "unable to create midi.\n");
return ret;
}
rt->instance->private_data = rt;
......
sound/usb/6fire/pcm.c
浏览文件 @ e3b3757b
......@@ -79,32 +79,35 @@ static int usb6fire_pcm_set_rate(struct pcm_runtime *rt)
ctrl_rt->usb_streaming = false;
ret = ctrl_rt->update_streaming(ctrl_rt);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "error stopping streaming while "
"setting samplerate %d.\n", rates[rt->rate]);
dev_err(&rt->chip->dev->dev,
"error stopping streaming while setting samplerate %d.\n",
rates[rt->rate]);
return ret;
}
ret = ctrl_rt->set_rate(ctrl_rt, rt->rate);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "error setting samplerate %d.\n",
rates[rt->rate]);
dev_err(&rt->chip->dev->dev,
"error setting samplerate %d.\n",
rates[rt->rate]);
return ret;
}
ret = ctrl_rt->set_channels(ctrl_rt, OUT_N_CHANNELS, IN_N_CHANNELS,
false, false);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "error initializing channels "
"while setting samplerate %d.\n",
rates[rt->rate]);
dev_err(&rt->chip->dev->dev,
"error initializing channels while setting samplerate %d.\n",
rates[rt->rate]);
return ret;
}
ctrl_rt->usb_streaming = true;
ret = ctrl_rt->update_streaming(ctrl_rt);
if (ret < 0) {
snd_printk(KERN_ERR PREFIX "error starting streaming while "
"setting samplerate %d.\n", rates[rt->rate]);
dev_err(&rt->chip->dev->dev,
"error starting streaming while setting samplerate %d.\n",
rates[rt->rate]);
return ret;
}
......@@ -124,7 +127,7 @@ static struct pcm_substream *usb6fire_pcm_get_substream(
return &rt->playback;
else if (alsa_sub->stream == SNDRV_PCM_STREAM_CAPTURE)
return &rt->capture;
snd_printk(KERN_ERR PREFIX "error getting pcm substream slot.\n");
dev_err(&rt->chip->dev->dev, "error getting pcm substream slot.\n");
return NULL;
}
......@@ -257,7 +260,7 @@ static void usb6fire_pcm_playback(struct pcm_substream *sub,
else if (alsa_rt->format == SNDRV_PCM_FORMAT_S24_LE)
dest = (u32 *) (urb->buffer);
else {
snd_printk(KERN_ERR PREFIX "Unknown sample format.");
dev_err(&rt->chip->dev->dev, "Unknown sample format.");
return;
}
......@@ -307,8 +310,8 @@ static void usb6fire_pcm_in_urb_handler(struct urb *usb_urb)
}
if (rt->stream_state == STREAM_DISABLED) {
snd_printk(KERN_ERR PREFIX "internal error: "
"stream disabled in in-urb handler.\n");
dev_err(&rt->chip->dev->dev,
"internal error: stream disabled in in-urb handler.\n");
return;
}
......@@ -410,7 +413,7 @@ static int usb6fire_pcm_open(struct snd_pcm_substream *alsa_sub)
if (!sub) {
mutex_unlock(&rt->stream_mutex);
snd_printk(KERN_ERR PREFIX "invalid stream type.\n");
dev_err(&rt->chip->dev->dev, "invalid stream type.\n");
return -EINVAL;
}
......@@ -481,8 +484,9 @@ static int usb6fire_pcm_prepare(struct snd_pcm_substream *alsa_sub)
break;
if (rt->rate == ARRAY_SIZE(rates)) {
mutex_unlock(&rt->stream_mutex);
snd_printk("invalid rate %d in prepare.\n",
alsa_rt->rate);
dev_err(&rt->chip->dev->dev,
"invalid rate %d in prepare.\n",
alsa_rt->rate);
return -EINVAL;
}
......@@ -494,8 +498,8 @@ static int usb6fire_pcm_prepare(struct snd_pcm_substream *alsa_sub)
ret = usb6fire_pcm_stream_start(rt);
if (ret) {
mutex_unlock(&rt->stream_mutex);
snd_printk(KERN_ERR PREFIX
"could not start pcm stream.\n");
dev_err(&rt->chip->dev->dev,
"could not start pcm stream.\n");
return ret;
}
}
......@@ -650,7 +654,7 @@ int usb6fire_pcm_init(struct sfire_chip *chip)
if (ret < 0) {
usb6fire_pcm_buffers_destroy(rt);
kfree(rt);
snd_printk(KERN_ERR PREFIX "cannot create pcm instance.\n");
dev_err(&chip->dev->dev, "cannot create pcm instance.\n");
return ret;
}
......@@ -662,8 +666,8 @@ int usb6fire_pcm_init(struct sfire_chip *chip)
if (ret) {
usb6fire_pcm_buffers_destroy(rt);
kfree(rt);
snd_printk(KERN_ERR PREFIX
"error preallocating pcm buffers.\n");
dev_err(&chip->dev->dev,
"error preallocating pcm buffers.\n");
return ret;
}
rt->instance = pcm;
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或