MFD: mcp-sa11x0: move setup of PPC unit out of mcp-sa11x0.c

Patch taken from af9081ae (ARM: sa1100: Refactor mcp-sa11x0 to use
platform resources.) by Jochen Friedrich <jochen@scram.de>, and
consolidated to use a common function.

Move the setup of the PPC unit out of mcp-sa11x0 into the core SA11x0
code, and call it from each platforms initialization file.  This
centralizes the setup of the PPC unit while not polluting the mcp-sa11x0
driver with these details.
Acked-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-sa1100/assabet.c

@@ -231,6 +231,8 @@ static void __init assabet_init(void)
 	PPDR |= PPC_TXD3 | PPC_TXD1;
 	PPSR |= PPC_TXD3 | PPC_TXD1;
 
+	sa11x0_ppc_configure_mcp();
+
 	sa1100fb_lcd_power = assabet_lcd_power;
 	sa1100fb_backlight_power = assabet_backlight_power;
 

arch/arm/mach-sa1100/cerf.c

@@ -128,6 +128,7 @@ static struct mcp_plat_data cerf_mcp_data = {
 
 static void __init cerf_init(void)
 {
+	sa11x0_ppc_configure_mcp();
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
 	sa11x0_register_mcp(&cerf_mcp_data);

arch/arm/mach-sa1100/collie.c

@@ -341,6 +341,8 @@ static void __init collie_init(void)
 
 	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
 
+	sa11x0_ppc_configure_mcp();
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 

arch/arm/mach-sa1100/generic.c

@@ -240,6 +240,16 @@ static struct platform_device sa11x0mcp_device = {
 	.resource	= sa11x0mcp_resources,
 };
 
+void __init sa11x0_ppc_configure_mcp(void)
+{
+	/* Setup the PPC unit for the MCP */
+	PPDR &= ~PPC_RXD4;
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PSDR |= PPC_RXD4;
+	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+}
+
 void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
 	sa11x0_register_device(&sa11x0mcp_device, data);

arch/arm/mach-sa1100/generic.h

@@ -39,4 +39,5 @@ struct irda_platform_data;
 void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
+void sa11x0_ppc_configure_mcp(void);
 void sa11x0_register_mcp(struct mcp_plat_data *data);

arch/arm/mach-sa1100/lart.c

@@ -28,6 +28,7 @@ static struct mcp_plat_data lart_mcp_data = {
 
 static void __init lart_init(void)
 {
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 

arch/arm/mach-sa1100/shannon.c

@@ -59,6 +59,7 @@ static struct mcp_plat_data shannon_mcp_data = {
 
 static void __init shannon_init(void)
 {
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
 	sa11x0_register_mcp(&shannon_mcp_data);
 }

arch/arm/mach-sa1100/simpad.c

@@ -376,6 +376,7 @@ static int __init simpad_init(void)
 
 	pm_power_off = simpad_power_off;
 
+	sa11x0_ppc_configure_mcp();
 	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
 	sa11x0_register_mcp(&simpad_mcp_data);

drivers/mfd/mcp-sa11x0.c

@@ -165,15 +165,6 @@ static int mcp_sa11x0_probe(struct platform_device *pdev)
 		ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 	}
 
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	/*
 	 * Initialise device.  Note that we initially
 	 * set the sampling rate to minimum.