提交 e337853e 编写于 作者: K Kuninori Morimoto 提交者: Mark Brown

ASoC: rsnd: add rsnd_adg_set_ssi_clk() and cleanup adg

This patch adds rsnd_adg_set_ssi_clk() to access to
AUDIO_CLK_SEL0/1/2, and removes last user of
rsnd_write/read/bset which is very low level function.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
上级 a0732782
......@@ -30,41 +30,41 @@ struct rsnd_adg {
i++, (pos) = adg->clk[i])
#define rsnd_priv_to_adg(priv) ((struct rsnd_adg *)(priv)->adg)
static enum rsnd_reg rsnd_adg_ssi_reg_get(int id)
static void rsnd_adg_set_ssi_clk(struct rsnd_mod *mod, u32 val)
{
enum rsnd_reg reg;
int id = rsnd_mod_id(mod);
int shift = (id % 4) * 8;
u32 mask = 0xFF << shift;
val = val << shift;
/*
* SSI 8 is not connected to ADG.
* it works with SSI 7
*/
if (id == 8)
return RSND_REG_MAX;
if (0 <= id && id <= 3)
reg = RSND_REG_AUDIO_CLK_SEL0;
else if (4 <= id && id <= 7)
reg = RSND_REG_AUDIO_CLK_SEL1;
else
reg = RSND_REG_AUDIO_CLK_SEL2;
return reg;
return;
switch (id / 4) {
case 0:
rsnd_mod_bset(mod, AUDIO_CLK_SEL0, mask, val);
break;
case 1:
rsnd_mod_bset(mod, AUDIO_CLK_SEL1, mask, val);
break;
case 2:
rsnd_mod_bset(mod, AUDIO_CLK_SEL2, mask, val);
break;
}
}
int rsnd_adg_ssi_clk_stop(struct rsnd_mod *mod)
{
struct rsnd_priv *priv = rsnd_mod_to_priv(mod);
enum rsnd_reg reg;
int id;
/*
* "mod" = "ssi" here.
* we can get "ssi id" from mod
*/
id = rsnd_mod_id(mod);
reg = rsnd_adg_ssi_reg_get(id);
rsnd_write(priv, mod, reg, 0);
rsnd_adg_set_ssi_clk(mod, 0);
return 0;
}
......@@ -75,8 +75,7 @@ int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *mod, unsigned int rate)
struct rsnd_adg *adg = rsnd_priv_to_adg(priv);
struct device *dev = rsnd_priv_to_dev(priv);
struct clk *clk;
enum rsnd_reg reg;
int id, shift, i;
int i;
u32 data;
int sel_table[] = {
[CLKA] = 0x1,
......@@ -125,19 +124,10 @@ int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *mod, unsigned int rate)
* This "mod" = "ssi" here.
* we can get "ssi id" from mod
*/
id = rsnd_mod_id(mod);
reg = rsnd_adg_ssi_reg_get(id);
dev_dbg(dev, "ADG: ssi%d selects clk%d = %d", id, i, rate);
/*
* Enable SSIx clock
*/
shift = (id % 4) * 8;
rsnd_adg_set_ssi_clk(mod, data);
rsnd_bset(priv, mod, reg,
0xFF << shift,
data << shift);
dev_dbg(dev, "ADG: ssi%d selects clk%d = %d",
rsnd_mod_id(mod), i, rate);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册