提交 e32740d9 编写于 作者: H Harvey Harrison 提交者: Takashi Iwai

ALSA: pcxhr.h replace signed one-bit bitfields

The usage and comments make it clear values of 1/0 were intended
rather than -1/0

Noticed by sparse:
sound/pci/pcxhr/pcxhr.h:100:20: error: dubious one-bit signed bitfield
sound/pci/pcxhr/pcxhr.h:101:22: error: dubious one-bit signed bitfield
sound/pci/pcxhr/pcxhr.h:102:24: error: dubious one-bit signed bitfield
sound/pci/pcxhr/pcxhr.h:103:21: error: dubious one-bit signed bitfield
sound/pci/pcxhr/pcxhr.h:104:25: error: dubious one-bit signed bitfield
sound/pci/pcxhr/pcxhr.h:105:20: error: dubious one-bit signed bitfield
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
上级 402a917a
......@@ -97,12 +97,12 @@ struct pcxhr_mgr {
int capture_chips;
int fw_file_set;
int firmware_num;
int is_hr_stereo:1;
int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */
int board_has_analog:1; /* if 0 the board is digital only */
int board_has_mic:1; /* if 1 the board has microphone input */
int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
int mono_capture:1; /* if 1 the board does mono capture */
unsigned int is_hr_stereo:1;
unsigned int board_has_aes1:1; /* if 1 board has AES1 plug and SRC */
unsigned int board_has_analog:1; /* if 0 the board is digital only */
unsigned int board_has_mic:1; /* if 1 the board has microphone input */
unsigned int board_aes_in_192k:1;/* if 1 the aes input plugs do support 192kHz */
unsigned int mono_capture:1; /* if 1 the board does mono capture */
struct snd_dma_buffer hostport;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册