提交 e2a1e2f0 编写于 作者: B Ben Widawsky 提交者: Daniel Vetter

drm/i915: ring irq cleanups

- gen6 put/get only need one argument
    rflags and gflags are always the same (see above explanation)
- remove a couple redundantly defined IRQs
- reordered some lines to make things go in descending order

Every ring has its own interrupts, enables, masks, and status bits that
are fed into the main interrupt enable/mask/status registers. At one
point in time it seemed like a good idea to make our functions support
the notion that each interrupt may have a different bit position in the
corresponding register (blitter parser error may be bit n in IMR, but
bit m in blitter IMR). It turned out though that the HW designers did us
a solid on Gen6+ and this unfortunate situation has been avoided. This
allows our interrupt code to be cleaned up a bit.

I jammed this into one commit because there should be no functional
change with this commit, and staging it into multiple commits was
unnecessarily artificial IMO.

CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NBen Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet:
- fixed up merged conflict with vlv changes.
- added GEN6 to GT blitter bit, we only use it on gen6+.
- added a comment to both ring irq bits and GT irq bits that on gen6+
  these alias.
- added comment that GT_BSD_USER_INTERRUPT is ilk-only.
- I've got confused a bit that we still use GT_USER_INTERRUPT on ivb
  for the render ring - but this goes back to ilk where we have only
  gt interrupt bits and so we be equally confusing if changed.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 96d6e350
......@@ -462,7 +462,7 @@ static irqreturn_t valleyview_irq_handler(DRM_IRQ_ARGS)
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GT_BLT_USER_INTERRUPT)
if (gt_iir & GT_GEN6_BLT_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (gt_iir & (GT_GEN6_BLT_CS_ERROR_INTERRUPT |
......@@ -620,9 +620,9 @@ static irqreturn_t ivybridge_irq_handler(DRM_IRQ_ARGS)
if (gt_iir & (GT_USER_INTERRUPT | GT_PIPE_NOTIFY))
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & GT_GEN6_BSD_USER_INTERRUPT)
if (gt_iir & GEN6_BSD_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GT_BLT_USER_INTERRUPT)
if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (de_iir & DE_GSE_IVB)
......@@ -688,7 +688,7 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
atomic_inc(&dev_priv->irq_received);
if (IS_GEN6(dev))
bsd_usr_interrupt = GT_GEN6_BSD_USER_INTERRUPT;
bsd_usr_interrupt = GEN6_BSD_USER_INTERRUPT;
/* disable master interrupt before clearing iir */
de_ier = I915_READ(DEIER);
......@@ -722,7 +722,7 @@ static irqreturn_t ironlake_irq_handler(DRM_IRQ_ARGS)
notify_ring(dev, &dev_priv->ring[RCS]);
if (gt_iir & bsd_usr_interrupt)
notify_ring(dev, &dev_priv->ring[VCS]);
if (gt_iir & GT_BLT_USER_INTERRUPT)
if (gt_iir & GEN6_BLITTER_USER_INTERRUPT)
notify_ring(dev, &dev_priv->ring[BCS]);
if (de_iir & DE_GSE)
......@@ -2081,8 +2081,8 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
if (IS_GEN6(dev))
render_irqs =
GT_USER_INTERRUPT |
GT_GEN6_BSD_USER_INTERRUPT |
GT_BLT_USER_INTERRUPT;
GEN6_BSD_USER_INTERRUPT |
GEN6_BLITTER_USER_INTERRUPT;
else
render_irqs =
GT_USER_INTERRUPT |
......@@ -2154,8 +2154,8 @@ static int ivybridge_irq_postinstall(struct drm_device *dev)
I915_WRITE(GTIIR, I915_READ(GTIIR));
I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
render_irqs = GT_USER_INTERRUPT | GT_GEN6_BSD_USER_INTERRUPT |
GT_BLT_USER_INTERRUPT;
render_irqs = GT_USER_INTERRUPT | GEN6_BSD_USER_INTERRUPT |
GEN6_BLITTER_USER_INTERRUPT;
I915_WRITE(GTIER, render_irqs);
POSTING_READ(GTIER);
......@@ -2218,7 +2218,7 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
render_irqs = GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT |
GT_GEN6_BLT_CS_ERROR_INTERRUPT |
GT_BLT_USER_INTERRUPT |
GT_GEN6_BLT_USER_INTERRUPT |
GT_GEN6_BSD_USER_INTERRUPT |
GT_GEN6_BSD_CS_ERROR_INTERRUPT |
GT_GEN7_L3_PARITY_ERROR_INTERRUPT |
......
......@@ -643,7 +643,9 @@
#define CACHE_MODE_1 0x7004 /* IVB+ */
#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
/* GEN6 interrupt control */
/* GEN6 interrupt control
* Note that the per-ring interrupt bits do alias with the global interrupt bits
* in GTIMR. */
#define GEN6_RENDER_HWSTAM 0x2098
#define GEN6_RENDER_IMR 0x20a8
#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
......@@ -3203,13 +3205,15 @@
#define DEIIR 0x44008
#define DEIER 0x4400c
/* GT interrupt */
/* GT interrupt.
* Note that for gen6+ the ring-specific interrupt bits do alias with the
* corresponding bits in the per-ring interrupt control registers. */
#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
#define GT_BLT_USER_INTERRUPT (1 << 22)
#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
#define GT_BSD_USER_INTERRUPT (1 << 5)
#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
#define GT_PIPE_NOTIFY (1 << 4)
#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
......
......@@ -788,7 +788,7 @@ ring_add_request(struct intel_ring_buffer *ring,
}
static bool
gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 mask)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
......@@ -803,9 +803,9 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
spin_lock(&ring->irq_lock);
if (ring->irq_refcount++ == 0) {
ring->irq_mask &= ~rflag;
ring->irq_mask &= ~mask;
I915_WRITE_IMR(ring, ring->irq_mask);
ironlake_enable_irq(dev_priv, gflag);
ironlake_enable_irq(dev_priv, mask);
}
spin_unlock(&ring->irq_lock);
......@@ -813,16 +813,16 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
}
static void
gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag)
gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 mask)
{
struct drm_device *dev = ring->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
spin_lock(&ring->irq_lock);
if (--ring->irq_refcount == 0) {
ring->irq_mask |= rflag;
ring->irq_mask |= mask;
I915_WRITE_IMR(ring, ring->irq_mask);
ironlake_disable_irq(dev_priv, gflag);
ironlake_disable_irq(dev_priv, mask);
}
spin_unlock(&ring->irq_lock);
......@@ -1376,33 +1376,25 @@ gen6_ring_dispatch_execbuffer(struct intel_ring_buffer *ring,
static bool
gen6_render_ring_get_irq(struct intel_ring_buffer *ring)
{
return gen6_ring_get_irq(ring,
GT_USER_INTERRUPT,
GEN6_RENDER_USER_INTERRUPT);
return gen6_ring_get_irq(ring, GT_USER_INTERRUPT);
}
static void
gen6_render_ring_put_irq(struct intel_ring_buffer *ring)
{
return gen6_ring_put_irq(ring,
GT_USER_INTERRUPT,
GEN6_RENDER_USER_INTERRUPT);
return gen6_ring_put_irq(ring, GT_USER_INTERRUPT);
}
static bool
gen6_bsd_ring_get_irq(struct intel_ring_buffer *ring)
{
return gen6_ring_get_irq(ring,
GT_GEN6_BSD_USER_INTERRUPT,
GEN6_BSD_USER_INTERRUPT);
return gen6_ring_get_irq(ring, GEN6_BSD_USER_INTERRUPT);
}
static void
gen6_bsd_ring_put_irq(struct intel_ring_buffer *ring)
{
return gen6_ring_put_irq(ring,
GT_GEN6_BSD_USER_INTERRUPT,
GEN6_BSD_USER_INTERRUPT);
return gen6_ring_put_irq(ring, GEN6_BSD_USER_INTERRUPT);
}
/* ring buffer for Video Codec for Gen6+ */
......@@ -1431,17 +1423,13 @@ static const struct intel_ring_buffer gen6_bsd_ring = {
static bool
blt_ring_get_irq(struct intel_ring_buffer *ring)
{
return gen6_ring_get_irq(ring,
GT_BLT_USER_INTERRUPT,
GEN6_BLITTER_USER_INTERRUPT);
return gen6_ring_get_irq(ring, GEN6_BLITTER_USER_INTERRUPT);
}
static void
blt_ring_put_irq(struct intel_ring_buffer *ring)
{
gen6_ring_put_irq(ring,
GT_BLT_USER_INTERRUPT,
GEN6_BLITTER_USER_INTERRUPT);
gen6_ring_put_irq(ring, GEN6_BLITTER_USER_INTERRUPT);
}
static int blt_ring_flush(struct intel_ring_buffer *ring,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册