Merge branch 'bcm63xx_enet-remove-mac_id-usage'

Jonas Gorski says:

====================
bcm63xx_enet: remove mac_id usage

This patchset aims at reducing the platform device id number usage with
the target of making it eventually possible to probe the driver through OF.

Runtested on BCM6358.

Since the patches touch mostly net/, they should go through net-next.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

arch/mips/bcm63xx/dev-enet.c

@@ -265,6 +265,14 @@ int __init bcm63xx_enet_register(int unit,
 		dpd->dma_chan_width = ENETDMA_CHAN_WIDTH;
 	}
 
+	if (unit == 0) {
+		dpd->rx_chan = 0;
+		dpd->tx_chan = 1;
+	} else {
+		dpd->rx_chan = 2;
+		dpd->tx_chan = 3;
+	}
+
 	ret = platform_device_register(pdev);
 	if (ret)
 		return ret;

arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h

@@ -55,6 +55,10 @@ struct bcm63xx_enet_platform_data {
 
 	/* DMA descriptor shift */
 	unsigned int dma_desc_shift;
+
+	/* dma channel ids */
+	int rx_chan;
+	int tx_chan;
 };
 
 /*

drivers/net/ethernet/broadcom/bcm63xx_enet.c

@@ -1716,7 +1716,6 @@ static int bcm_enet_probe(struct platform_device *pdev)
 	struct bcm63xx_enet_platform_data *pd;
 	struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
 	struct mii_bus *bus;
-	const char *clk_name;
 	int i, ret;
 
 	if (!bcm_enet_shared_base[0])
@@ -1751,20 +1750,8 @@ static int bcm_enet_probe(struct platform_device *pdev)
 	dev->irq = priv->irq = res_irq->start;
 	priv->irq_rx = res_irq_rx->start;
 	priv->irq_tx = res_irq_tx->start;
-	priv->mac_id = pdev->id;
 
-	/* get rx & tx dma channel id for this mac */
-	if (priv->mac_id == 0) {
-		priv->rx_chan = 0;
-		priv->tx_chan = 1;
-		clk_name = "enet0";
-	} else {
-		priv->rx_chan = 2;
-		priv->tx_chan = 3;
-		clk_name = "enet1";
-	}
-
-	priv->mac_clk = devm_clk_get(&pdev->dev, clk_name);
+	priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
 	if (IS_ERR(priv->mac_clk)) {
 		ret = PTR_ERR(priv->mac_clk);
 		goto out;
@@ -1795,9 +1782,11 @@ static int bcm_enet_probe(struct platform_device *pdev)
 		priv->dma_chan_width = pd->dma_chan_width;
 		priv->dma_has_sram = pd->dma_has_sram;
 		priv->dma_desc_shift = pd->dma_desc_shift;
+		priv->rx_chan = pd->rx_chan;
+		priv->tx_chan = pd->tx_chan;
 	}
 
-	if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
+	if (priv->has_phy && !priv->use_external_mii) {
 		/* using internal PHY, enable clock */
 		priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
 		if (IS_ERR(priv->phy_clk)) {
@@ -1828,7 +1817,7 @@ static int bcm_enet_probe(struct platform_device *pdev)
 		bus->priv = priv;
 		bus->read = bcm_enet_mdio_read_phylib;
 		bus->write = bcm_enet_mdio_write_phylib;
-		sprintf(bus->id, "%s-%d", pdev->name, priv->mac_id);
+		sprintf(bus->id, "%s-%d", pdev->name, pdev->id);
 
 		/* only probe bus where we think the PHY is, because
 		 * the mdio read operation return 0 instead of 0xffff

drivers/net/ethernet/broadcom/bcm63xx_enet.h

@@ -193,9 +193,6 @@ struct bcm_enet_mib_counters {
 
 struct bcm_enet_priv {
 
-	/* mac id (from platform device id) */
-	int mac_id;
-
 	/* base remapped address of device */
 	void __iomem *base;