提交 e28c00ad 编写于 作者: B Bryan O'Sullivan 提交者: Roland Dreier

IB/ipath: misc infiniband code, part 2

Management datagram support, queue pairs, and reliable and unreliable
connections.
Signed-off-by: NBryan O'Sullivan <bos@pathscale.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 cef1cce5
此差异已折叠。
此差异已折叠。
/*
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "ipath_verbs.h"
/*
* Convert the AETH RNR timeout code into the number of milliseconds.
*/
const u32 ib_ipath_rnr_table[32] = {
656, /* 0 */
1, /* 1 */
1, /* 2 */
1, /* 3 */
1, /* 4 */
1, /* 5 */
1, /* 6 */
1, /* 7 */
1, /* 8 */
1, /* 9 */
1, /* A */
1, /* B */
1, /* C */
1, /* D */
2, /* E */
2, /* F */
3, /* 10 */
4, /* 11 */
6, /* 12 */
8, /* 13 */
11, /* 14 */
16, /* 15 */
21, /* 16 */
31, /* 17 */
41, /* 18 */
62, /* 19 */
82, /* 1A */
123, /* 1B */
164, /* 1C */
246, /* 1D */
328, /* 1E */
492 /* 1F */
};
/**
* ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
* @qp: the QP
*
* XXX Use a simple list for now. We might need a priority
* queue if we have lots of QPs waiting for RNR timeouts
* but that should be rare.
*/
void ipath_insert_rnr_queue(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
unsigned long flags;
spin_lock_irqsave(&dev->pending_lock, flags);
if (list_empty(&dev->rnrwait))
list_add(&qp->timerwait, &dev->rnrwait);
else {
struct list_head *l = &dev->rnrwait;
struct ipath_qp *nqp = list_entry(l->next, struct ipath_qp,
timerwait);
while (qp->s_rnr_timeout >= nqp->s_rnr_timeout) {
qp->s_rnr_timeout -= nqp->s_rnr_timeout;
l = l->next;
if (l->next == &dev->rnrwait)
break;
nqp = list_entry(l->next, struct ipath_qp,
timerwait);
}
list_add(&qp->timerwait, l);
}
spin_unlock_irqrestore(&dev->pending_lock, flags);
}
/**
* ipath_get_rwqe - copy the next RWQE into the QP's RWQE
* @qp: the QP
* @wr_id_only: update wr_id only, not SGEs
*
* Return 0 if no RWQE is available, otherwise return 1.
*
* Called at interrupt level with the QP r_rq.lock held.
*/
int ipath_get_rwqe(struct ipath_qp *qp, int wr_id_only)
{
struct ipath_rq *rq;
struct ipath_srq *srq;
struct ipath_rwqe *wqe;
int ret;
if (!qp->ibqp.srq) {
rq = &qp->r_rq;
if (unlikely(rq->tail == rq->head)) {
ret = 0;
goto bail;
}
wqe = get_rwqe_ptr(rq, rq->tail);
qp->r_wr_id = wqe->wr_id;
if (!wr_id_only) {
qp->r_sge.sge = wqe->sg_list[0];
qp->r_sge.sg_list = wqe->sg_list + 1;
qp->r_sge.num_sge = wqe->num_sge;
qp->r_len = wqe->length;
}
if (++rq->tail >= rq->size)
rq->tail = 0;
ret = 1;
goto bail;
}
srq = to_isrq(qp->ibqp.srq);
rq = &srq->rq;
spin_lock(&rq->lock);
if (unlikely(rq->tail == rq->head)) {
spin_unlock(&rq->lock);
ret = 0;
goto bail;
}
wqe = get_rwqe_ptr(rq, rq->tail);
qp->r_wr_id = wqe->wr_id;
if (!wr_id_only) {
qp->r_sge.sge = wqe->sg_list[0];
qp->r_sge.sg_list = wqe->sg_list + 1;
qp->r_sge.num_sge = wqe->num_sge;
qp->r_len = wqe->length;
}
if (++rq->tail >= rq->size)
rq->tail = 0;
if (srq->ibsrq.event_handler) {
struct ib_event ev;
u32 n;
if (rq->head < rq->tail)
n = rq->size + rq->head - rq->tail;
else
n = rq->head - rq->tail;
if (n < srq->limit) {
srq->limit = 0;
spin_unlock(&rq->lock);
ev.device = qp->ibqp.device;
ev.element.srq = qp->ibqp.srq;
ev.event = IB_EVENT_SRQ_LIMIT_REACHED;
srq->ibsrq.event_handler(&ev,
srq->ibsrq.srq_context);
} else
spin_unlock(&rq->lock);
} else
spin_unlock(&rq->lock);
ret = 1;
bail:
return ret;
}
/**
* ipath_ruc_loopback - handle UC and RC lookback requests
* @sqp: the loopback QP
* @wc: the work completion entry
*
* This is called from ipath_do_uc_send() or ipath_do_rc_send() to
* forward a WQE addressed to the same HCA.
* Note that although we are single threaded due to the tasklet, we still
* have to protect against post_send(). We don't have to worry about
* receive interrupts since this is a connected protocol and all packets
* will pass through here.
*/
void ipath_ruc_loopback(struct ipath_qp *sqp, struct ib_wc *wc)
{
struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
struct ipath_qp *qp;
struct ipath_swqe *wqe;
struct ipath_sge *sge;
unsigned long flags;
u64 sdata;
qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
if (!qp) {
dev->n_pkt_drops++;
return;
}
again:
spin_lock_irqsave(&sqp->s_lock, flags);
if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_SEND_OK)) {
spin_unlock_irqrestore(&sqp->s_lock, flags);
goto done;
}
/* Get the next send request. */
if (sqp->s_last == sqp->s_head) {
/* Send work queue is empty. */
spin_unlock_irqrestore(&sqp->s_lock, flags);
goto done;
}
/*
* We can rely on the entry not changing without the s_lock
* being held until we update s_last.
*/
wqe = get_swqe_ptr(sqp, sqp->s_last);
spin_unlock_irqrestore(&sqp->s_lock, flags);
wc->wc_flags = 0;
wc->imm_data = 0;
sqp->s_sge.sge = wqe->sg_list[0];
sqp->s_sge.sg_list = wqe->sg_list + 1;
sqp->s_sge.num_sge = wqe->wr.num_sge;
sqp->s_len = wqe->length;
switch (wqe->wr.opcode) {
case IB_WR_SEND_WITH_IMM:
wc->wc_flags = IB_WC_WITH_IMM;
wc->imm_data = wqe->wr.imm_data;
/* FALLTHROUGH */
case IB_WR_SEND:
spin_lock_irqsave(&qp->r_rq.lock, flags);
if (!ipath_get_rwqe(qp, 0)) {
rnr_nak:
spin_unlock_irqrestore(&qp->r_rq.lock, flags);
/* Handle RNR NAK */
if (qp->ibqp.qp_type == IB_QPT_UC)
goto send_comp;
if (sqp->s_rnr_retry == 0) {
wc->status = IB_WC_RNR_RETRY_EXC_ERR;
goto err;
}
if (sqp->s_rnr_retry_cnt < 7)
sqp->s_rnr_retry--;
dev->n_rnr_naks++;
sqp->s_rnr_timeout =
ib_ipath_rnr_table[sqp->s_min_rnr_timer];
ipath_insert_rnr_queue(sqp);
goto done;
}
spin_unlock_irqrestore(&qp->r_rq.lock, flags);
break;
case IB_WR_RDMA_WRITE_WITH_IMM:
wc->wc_flags = IB_WC_WITH_IMM;
wc->imm_data = wqe->wr.imm_data;
spin_lock_irqsave(&qp->r_rq.lock, flags);
if (!ipath_get_rwqe(qp, 1))
goto rnr_nak;
spin_unlock_irqrestore(&qp->r_rq.lock, flags);
/* FALLTHROUGH */
case IB_WR_RDMA_WRITE:
if (wqe->length == 0)
break;
if (unlikely(!ipath_rkey_ok(dev, &qp->r_sge, wqe->length,
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
IB_ACCESS_REMOTE_WRITE))) {
acc_err:
wc->status = IB_WC_REM_ACCESS_ERR;
err:
wc->wr_id = wqe->wr.wr_id;
wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc->vendor_err = 0;
wc->byte_len = 0;
wc->qp_num = sqp->ibqp.qp_num;
wc->src_qp = sqp->remote_qpn;
wc->pkey_index = 0;
wc->slid = sqp->remote_ah_attr.dlid;
wc->sl = sqp->remote_ah_attr.sl;
wc->dlid_path_bits = 0;
wc->port_num = 0;
ipath_sqerror_qp(sqp, wc);
goto done;
}
break;
case IB_WR_RDMA_READ:
if (unlikely(!ipath_rkey_ok(dev, &sqp->s_sge, wqe->length,
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
IB_ACCESS_REMOTE_READ)))
goto acc_err;
if (unlikely(!(qp->qp_access_flags &
IB_ACCESS_REMOTE_READ)))
goto acc_err;
qp->r_sge.sge = wqe->sg_list[0];
qp->r_sge.sg_list = wqe->sg_list + 1;
qp->r_sge.num_sge = wqe->wr.num_sge;
break;
case IB_WR_ATOMIC_CMP_AND_SWP:
case IB_WR_ATOMIC_FETCH_AND_ADD:
if (unlikely(!ipath_rkey_ok(dev, &qp->r_sge, sizeof(u64),
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
IB_ACCESS_REMOTE_ATOMIC)))
goto acc_err;
/* Perform atomic OP and save result. */
sdata = wqe->wr.wr.atomic.swap;
spin_lock_irqsave(&dev->pending_lock, flags);
qp->r_atomic_data = *(u64 *) qp->r_sge.sge.vaddr;
if (wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)
*(u64 *) qp->r_sge.sge.vaddr =
qp->r_atomic_data + sdata;
else if (qp->r_atomic_data == wqe->wr.wr.atomic.compare_add)
*(u64 *) qp->r_sge.sge.vaddr = sdata;
spin_unlock_irqrestore(&dev->pending_lock, flags);
*(u64 *) sqp->s_sge.sge.vaddr = qp->r_atomic_data;
goto send_comp;
default:
goto done;
}
sge = &sqp->s_sge.sge;
while (sqp->s_len) {
u32 len = sqp->s_len;
if (len > sge->length)
len = sge->length;
BUG_ON(len == 0);
ipath_copy_sge(&qp->r_sge, sge->vaddr, len);
sge->vaddr += len;
sge->length -= len;
sge->sge_length -= len;
if (sge->sge_length == 0) {
if (--sqp->s_sge.num_sge)
*sge = *sqp->s_sge.sg_list++;
} else if (sge->length == 0 && sge->mr != NULL) {
if (++sge->n >= IPATH_SEGSZ) {
if (++sge->m >= sge->mr->mapsz)
break;
sge->n = 0;
}
sge->vaddr =
sge->mr->map[sge->m]->segs[sge->n].vaddr;
sge->length =
sge->mr->map[sge->m]->segs[sge->n].length;
}
sqp->s_len -= len;
}
if (wqe->wr.opcode == IB_WR_RDMA_WRITE ||
wqe->wr.opcode == IB_WR_RDMA_READ)
goto send_comp;
if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
wc->opcode = IB_WC_RECV_RDMA_WITH_IMM;
else
wc->opcode = IB_WC_RECV;
wc->wr_id = qp->r_wr_id;
wc->status = IB_WC_SUCCESS;
wc->vendor_err = 0;
wc->byte_len = wqe->length;
wc->qp_num = qp->ibqp.qp_num;
wc->src_qp = qp->remote_qpn;
/* XXX do we know which pkey matched? Only needed for GSI. */
wc->pkey_index = 0;
wc->slid = qp->remote_ah_attr.dlid;
wc->sl = qp->remote_ah_attr.sl;
wc->dlid_path_bits = 0;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), wc,
wqe->wr.send_flags & IB_SEND_SOLICITED);
send_comp:
sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
if (!test_bit(IPATH_S_SIGNAL_REQ_WR, &sqp->s_flags) ||
(wqe->wr.send_flags & IB_SEND_SIGNALED)) {
wc->wr_id = wqe->wr.wr_id;
wc->status = IB_WC_SUCCESS;
wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc->vendor_err = 0;
wc->byte_len = wqe->length;
wc->qp_num = sqp->ibqp.qp_num;
wc->src_qp = 0;
wc->pkey_index = 0;
wc->slid = 0;
wc->sl = 0;
wc->dlid_path_bits = 0;
wc->port_num = 0;
ipath_cq_enter(to_icq(sqp->ibqp.send_cq), wc, 0);
}
/* Update s_last now that we are finished with the SWQE */
spin_lock_irqsave(&sqp->s_lock, flags);
if (++sqp->s_last >= sqp->s_size)
sqp->s_last = 0;
spin_unlock_irqrestore(&sqp->s_lock, flags);
goto again;
done:
if (atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
}
/**
* ipath_no_bufs_available - tell the layer driver we need buffers
* @qp: the QP that caused the problem
* @dev: the device we ran out of buffers on
*
* Called when we run out of PIO buffers.
*/
void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev)
{
unsigned long flags;
spin_lock_irqsave(&dev->pending_lock, flags);
if (qp->piowait.next == LIST_POISON1)
list_add_tail(&qp->piowait, &dev->piowait);
spin_unlock_irqrestore(&dev->pending_lock, flags);
/*
* Note that as soon as ipath_layer_want_buffer() is called and
* possibly before it returns, ipath_ib_piobufavail()
* could be called. If we are still in the tasklet function,
* tasklet_hi_schedule() will not call us until the next time
* tasklet_hi_schedule() is called.
* We clear the tasklet flag now since we are committing to return
* from the tasklet function.
*/
clear_bit(IPATH_S_BUSY, &qp->s_flags);
tasklet_unlock(&qp->s_task);
ipath_layer_want_buffer(dev->dd);
dev->n_piowait++;
}
/**
* ipath_post_rc_send - post RC and UC sends
* @qp: the QP to post on
* @wr: the work request to send
*/
int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
{
struct ipath_swqe *wqe;
unsigned long flags;
u32 next;
int i, j;
int acc;
int ret;
/*
* Don't allow RDMA reads or atomic operations on UC or
* undefined operations.
* Make sure buffer is large enough to hold the result for atomics.
*/
if (qp->ibqp.qp_type == IB_QPT_UC) {
if ((unsigned) wr->opcode >= IB_WR_RDMA_READ) {
ret = -EINVAL;
goto bail;
}
} else if ((unsigned) wr->opcode > IB_WR_ATOMIC_FETCH_AND_ADD) {
ret = -EINVAL;
goto bail;
} else if (wr->opcode >= IB_WR_ATOMIC_CMP_AND_SWP &&
(wr->num_sge == 0 ||
wr->sg_list[0].length < sizeof(u64) ||
wr->sg_list[0].addr & (sizeof(u64) - 1))) {
ret = -EINVAL;
goto bail;
}
/* IB spec says that num_sge == 0 is OK. */
if (wr->num_sge > qp->s_max_sge) {
ret = -ENOMEM;
goto bail;
}
spin_lock_irqsave(&qp->s_lock, flags);
next = qp->s_head + 1;
if (next >= qp->s_size)
next = 0;
if (next == qp->s_last) {
spin_unlock_irqrestore(&qp->s_lock, flags);
ret = -EINVAL;
goto bail;
}
wqe = get_swqe_ptr(qp, qp->s_head);
wqe->wr = *wr;
wqe->ssn = qp->s_ssn++;
wqe->sg_list[0].mr = NULL;
wqe->sg_list[0].vaddr = NULL;
wqe->sg_list[0].length = 0;
wqe->sg_list[0].sge_length = 0;
wqe->length = 0;
acc = wr->opcode >= IB_WR_RDMA_READ ? IB_ACCESS_LOCAL_WRITE : 0;
for (i = 0, j = 0; i < wr->num_sge; i++) {
if (to_ipd(qp->ibqp.pd)->user && wr->sg_list[i].lkey == 0) {
spin_unlock_irqrestore(&qp->s_lock, flags);
ret = -EINVAL;
goto bail;
}
if (wr->sg_list[i].length == 0)
continue;
if (!ipath_lkey_ok(&to_idev(qp->ibqp.device)->lk_table,
&wqe->sg_list[j], &wr->sg_list[i],
acc)) {
spin_unlock_irqrestore(&qp->s_lock, flags);
ret = -EINVAL;
goto bail;
}
wqe->length += wr->sg_list[i].length;
j++;
}
wqe->wr.num_sge = j;
qp->s_head = next;
/*
* Wake up the send tasklet if the QP is not waiting
* for an RNR timeout.
*/
next = qp->s_rnr_timeout;
spin_unlock_irqrestore(&qp->s_lock, flags);
if (next == 0) {
if (qp->ibqp.qp_type == IB_QPT_UC)
ipath_do_uc_send((unsigned long) qp);
else
ipath_do_rc_send((unsigned long) qp);
}
ret = 0;
bail:
return ret;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册