提交 e2839d8f 编写于 作者: V Vladimir Koutny 提交者: John W. Linville

mac80211: configure default wmm params correctly

Default WMM params have to be set according to beacon/probe response
information prior to authentication (or IBSS start/join); beacon queue
is configured only in IBSS. This does not affect the use of 'real' WMM
params as reported by AP.
Signed-off-by: NVladimir Koutny <vlado@ksp.sk>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 675ef586
......@@ -220,6 +220,61 @@ static int ecw2cw(int ecw)
return (1 << ecw) - 1;
}
static void ieee80211_sta_def_wmm_params(struct net_device *dev,
struct ieee80211_sta_bss *bss,
int ibss)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
int i, have_higher_than_11mbit = 0;
/* cf. IEEE 802.11 9.2.12 */
for (i = 0; i < bss->supp_rates_len; i++)
if ((bss->supp_rates[i] & 0x7f) * 5 > 110)
have_higher_than_11mbit = 1;
if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
have_higher_than_11mbit)
sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
else
sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
if (local->ops->conf_tx) {
struct ieee80211_tx_queue_params qparam;
int i;
memset(&qparam, 0, sizeof(qparam));
qparam.aifs = 2;
if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
!(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE))
qparam.cw_min = 31;
else
qparam.cw_min = 15;
qparam.cw_max = 1023;
qparam.txop = 0;
for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++)
local->ops->conf_tx(local_to_hw(local),
i + IEEE80211_TX_QUEUE_DATA0,
&qparam);
if (ibss) {
/* IBSS uses different parameters for Beacon sending */
qparam.cw_min++;
qparam.cw_min *= 2;
qparam.cw_min--;
local->ops->conf_tx(local_to_hw(local),
IEEE80211_TX_QUEUE_BEACON, &qparam);
}
}
}
static void ieee80211_sta_wmm_params(struct net_device *dev,
struct ieee80211_if_sta *ifsta,
u8 *wmm_param, size_t wmm_param_len)
......@@ -2302,6 +2357,8 @@ static int ieee80211_sta_join_ibss(struct net_device *dev,
rates |= BIT(j);
}
ifsta->supp_rates_bits[local->hw.conf.channel->band] = rates;
ieee80211_sta_def_wmm_params(dev, bss, 1);
} while (0);
if (skb) {
......@@ -3293,6 +3350,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev,
ieee80211_sta_set_ssid(dev, selected->ssid,
selected->ssid_len);
ieee80211_sta_set_bssid(dev, selected->bssid);
ieee80211_sta_def_wmm_params(dev, selected, 0);
ieee80211_rx_bss_put(dev, selected);
ifsta->state = IEEE80211_AUTHENTICATE;
ieee80211_sta_reset_auth(dev, ifsta);
......@@ -3467,43 +3525,10 @@ int ieee80211_sta_set_ssid(struct net_device *dev, char *ssid, size_t len)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_if_sta *ifsta;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (len > IEEE80211_MAX_SSID_LEN)
return -EINVAL;
/* TODO: This should always be done for IBSS, even if IEEE80211_QOS is
* not defined. */
if (local->ops->conf_tx) {
struct ieee80211_tx_queue_params qparam;
int i;
memset(&qparam, 0, sizeof(qparam));
qparam.aifs = 2;
if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ &&
!(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE))
qparam.cw_min = 31;
else
qparam.cw_min = 15;
qparam.cw_max = 1023;
qparam.txop = 0;
for (i = IEEE80211_TX_QUEUE_DATA0; i < NUM_TX_DATA_QUEUES; i++)
local->ops->conf_tx(local_to_hw(local),
i + IEEE80211_TX_QUEUE_DATA0,
&qparam);
/* IBSS uses different parameters for Beacon sending */
qparam.cw_min++;
qparam.cw_min *= 2;
qparam.cw_min--;
local->ops->conf_tx(local_to_hw(local),
IEEE80211_TX_QUEUE_BEACON, &qparam);
}
ifsta = &sdata->u.sta;
if (ifsta->ssid_len != len || memcmp(ifsta->ssid, ssid, len) != 0)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册