[SCSI] aha152x: fix variable use before initialisation and other bugs

- change interface of the reset functions from Scsi_Cmnd to Scsi_Host.
- add functions with the original interface and rename the new
  functions to reflect the new interface.
- call these from the pcmcia driver, thereby avoiding the need to
  construct a (broken) Scsi_Cmnd from a Scsi_Host.
- just run the bh if the interrupt is from the controller and if so
  ensure that it's only called once per interrupt.
Signed-off-by: NJuergen E. Fischer <fischer@linux-buechse.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/aha152x.c

@@ -1260,16 +1260,15 @@ static void free_hard_reset_SCs(struct Scsi_Host *shpnt, Scsi_Cmnd **SCs)
  * Reset the bus
  *
  */
-static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
 {
-	struct Scsi_Host *shpnt = SCpnt->device->host;
 	unsigned long flags;
 
 	DO_LOCK(flags);
 
 #if defined(AHA152X_DEBUG)
 	if(HOSTDATA(shpnt)->debug & debug_eh) {
-		printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt);
+		printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
 		show_queues(shpnt);
 	}
 #endif
@@ -1277,14 +1276,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
 	free_hard_reset_SCs(shpnt, &ISSUE_SC);
 	free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
 
-	DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt));
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
 
 	SETPORT(SCSISEQ, SCSIRSTO);
 	mdelay(256);
 	SETPORT(SCSISEQ, 0);
 	mdelay(DELAY);
 
-	DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt));
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
 
 	setup_expected_interrupts(shpnt);
 	if(HOSTDATA(shpnt)->commands==0)
@@ -1295,6 +1294,14 @@ static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
 	return SUCCESS;
 }
 
+/*
+ * Reset the bus
+ *
+ */
+static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+{
+	return aha152x_bus_reset_host(SCpnt->device->host);
+}
 
 /*
  *  Restore default values to the AIC-6260 registers and reset the fifos
@@ -1337,22 +1344,27 @@ static void reset_ports(struct Scsi_Host *shpnt)
  * Reset the host (bus and controller)
  *
  */
-int aha152x_host_reset(Scsi_Cmnd * SCpnt)
+int aha152x_host_reset_host(struct Scsi_Host *shpnt)
 {
-#if defined(AHA152X_DEBUG)
-	struct Scsi_Host *shpnt = SCpnt->device->host;
-#endif
-
-	DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt);
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
 
-	aha152x_bus_reset(SCpnt);
+	aha152x_bus_reset_host(shpnt);
 
-	DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt));
-	reset_ports(SCpnt->device->host);
+	DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
+	reset_ports(shpnt);
 
 	return SUCCESS;
 }
 
+/*
+ * Reset the host (bus and controller)
+ * 
+ */
+static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
+{
+	return aha152x_host_reset_host(SCpnt->device->host);
+}
+
 /*
  * Return the "logical geometry"
  *
@@ -1431,22 +1443,18 @@ static void run(void)
 {
 	int i;
 	for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
-		struct Scsi_Host *shpnt = aha152x_host[i];
-		if (shpnt && HOSTDATA(shpnt)->service) {
-			HOSTDATA(shpnt)->service=0;
-			is_complete(shpnt);
-		}
+		is_complete(aha152x_host[i]);
 	}
 }
 
 /*
- *    Interrupts handler
+ * Interrupt handler
  *
  */
-
 static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
 {
 	struct Scsi_Host *shpnt = lookup_irq(irqno);
+	unsigned long flags;
 	unsigned char rev, dmacntrl0;
 
 	if (!shpnt) {
@@ -1472,23 +1480,23 @@ static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
 	if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
 		return IRQ_NONE;
 
+	if( TESTLO(DMASTAT, INTSTAT) )
+		return IRQ_NONE;	
+
 	/* no more interrupts from the controller, while we're busy.
 	   INTEN is restored by the BH handler */
 	CLRBITS(DMACNTRL0, INTEN);
 
-#if 0
-	/* check if there is already something to be
-           serviced; should not happen */
-	if(HOSTDATA(shpnt)->service) {
-		printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service);
-	        show_queues(shpnt);
+	DO_LOCK(flags);
+	if( HOSTDATA(shpnt)->service==0 ) {
+		HOSTDATA(shpnt)->service=1;
+
+		/* Poke the BH handler */
+		INIT_WORK(&aha152x_tq, (void *) run, NULL);
+		schedule_work(&aha152x_tq);
 	}
-#endif
-	
-	/* Poke the BH handler */
-	HOSTDATA(shpnt)->service++;
-	INIT_WORK(&aha152x_tq, (void *) run, NULL);
-	schedule_work(&aha152x_tq);
+	DO_UNLOCK(flags);
+
 	return IRQ_HANDLED;
 }
 
@@ -2527,7 +2535,18 @@ static void is_complete(struct Scsi_Host *shpnt)
 	unsigned long flags;
 	int pending;
 
+	if(!shpnt)
+		return;
+
 	DO_LOCK(flags);
+
+	if( HOSTDATA(shpnt)->service==0 )  {
+		DO_UNLOCK(flags);
+		return;
+	}
+
+	HOSTDATA(shpnt)->service = 0;
+
 	if(HOSTDATA(shpnt)->in_intr) {
 		DO_UNLOCK(flags);
 		/* aha152x_error never returns.. */

drivers/scsi/aha152x.h

@@ -332,6 +332,6 @@ struct aha152x_setup {
 
 struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
 void aha152x_release(struct Scsi_Host *);
-int aha152x_host_reset(Scsi_Cmnd *);
+int aha152x_host_reset_host(struct Scsi_Host *);
 
 #endif /* _AHA152X_H */

drivers/scsi/pcmcia/aha152x_stub.c

@@ -275,10 +275,8 @@ static int aha152x_resume(struct pcmcia_device *dev)
 
 	link->state &= ~DEV_SUSPEND;
 	if (link->state & DEV_CONFIG) {
-		Scsi_Cmnd tmp;
 		pcmcia_request_configuration(link->handle, &link->conf);
-		tmp.device->host = info->host;
-		aha152x_host_reset(&tmp);
+		aha152x_host_reset_host(info->host);
 	}
 
 	return 0;