enic: Log device configuration in detail during driver load

Signed-off-by: NChristian Benvenuti <benve@cisco.com>
Signed-off-by: NDanny Guo <dannguo@cisco.com>
Signed-off-by: NVasanthy Kolluri <vkolluri@cisco.com>
Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: NDavid Wang <dwang2@cisco.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/enic/enic.h

@@ -32,7 +32,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"2.1.1.16"
+#define DRV_VERSION		"2.1.1.17"
 #define DRV_COPYRIGHT		"Copyright 2008-2011 Cisco Systems, Inc"
 
 #define ENIC_BARS_MAX		6

drivers/net/enic/enic_res.c

@@ -97,11 +97,24 @@ int enic_get_vnic_config(struct enic *enic)
 	dev_info(enic_get_dev(enic),
 		"vNIC MAC addr %pM wq/rq %d/%d mtu %d\n",
 		enic->mac_addr, c->wq_desc_count, c->rq_desc_count, c->mtu);
-	dev_info(enic_get_dev(enic), "vNIC csum tx/rx %d/%d "
-		"tso %d intr timer %d usec rss %d\n",
-		ENIC_SETTING(enic, TXCSUM), ENIC_SETTING(enic, RXCSUM),
-		ENIC_SETTING(enic, TSO),
-		c->intr_timer_usec, ENIC_SETTING(enic, RSS));
+
+	dev_info(enic_get_dev(enic), "vNIC csum tx/rx %s/%s "
+		"tso/lro %s/%s rss %s intr mode %s type %s timer %d usec "
+		"loopback tag 0x%04x\n",
+		ENIC_SETTING(enic, TXCSUM) ? "yes" : "no",
+		ENIC_SETTING(enic, RXCSUM) ? "yes" : "no",
+		ENIC_SETTING(enic, TSO) ? "yes" : "no",
+		ENIC_SETTING(enic, LRO) ? "yes" : "no",
+		ENIC_SETTING(enic, RSS) ? "yes" : "no",
+		c->intr_mode == VENET_INTR_MODE_INTX ? "INTx" :
+		c->intr_mode == VENET_INTR_MODE_MSI ? "MSI" :
+		c->intr_mode == VENET_INTR_MODE_ANY ? "any" :
+		"unknown",
+		c->intr_timer_type == VENET_INTR_TYPE_MIN ? "min" :
+		c->intr_timer_type == VENET_INTR_TYPE_IDLE ? "idle" :
+		"unknown",
+		c->intr_timer_usec,
+		c->loop_tag);
 
 	return 0;
 }

drivers/net/enic/vnic_enet.h

@@ -51,4 +51,11 @@ struct vnic_enet_config {
 #define VENETF_RSSHASH_TCPIPV6_EX 0x400	/* Hash on TCP + IPv6 ext. fields */
 #define VENETF_LOOP		0x800	/* Loopback enabled */
 
+#define VENET_INTR_TYPE_MIN	0	/* Timer specs min interrupt spacing */
+#define VENET_INTR_TYPE_IDLE	1	/* Timer specs idle time before irq */
+
+#define VENET_INTR_MODE_ANY	0	/* Try MSI-X, then MSI, then INTx */
+#define VENET_INTR_MODE_MSI	1	/* Try MSI then INTx */
+#define VENET_INTR_MODE_INTX	2	/* Try INTx only */
+
 #endif /* _VNIC_ENIC_H_ */