Remove sk98lin ethernet driver.

Unmaintained, superceded by skge.

Prodded to deletion by Adrian Bunk.  Acked by Stephen Hemminger.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Documentation/feature-removal-schedule.txt

@@ -248,14 +248,6 @@ Who:	Len Brown <len.brown@intel.com>
 
 ---------------------------
 
-What:   sk98lin network driver
-When:   July 2007
-Why:    In kernel tree version of driver is unmaintained. Sk98lin driver
-	replaced by the skge driver. 
-Who:    Stephen Hemminger <shemminger@osdl.org>
-
----------------------------
-
 What:	Compaq touchscreen device emulation
 When:	Oct 2007
 Files:	drivers/input/tsdev.c

Documentation/networking/00-INDEX

@@ -96,9 +96,6 @@ routing.txt
 	- the new routing mechanism
 shaper.txt
 	- info on the module that can shape/limit transmitted traffic.
-sk98lin.txt
-	- Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
-	  Ethernet Adapter family driver info
 skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt

drivers/net/Kconfig

@@ -2113,7 +2113,7 @@ config SKGE
 	  with better performance and more complete ethtool support.
 
 	  It does not support the link failover and network management 
-	  features that "portable" vendor supplied sk98lin driver does.
+	  features available in the hardware.
 
 	  This driver supports adapters based on the original Yukon chipset:
 	  Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T,
@@ -2151,93 +2151,6 @@ config SKY2_DEBUG
 
 	 If unsure, say N.
 
-config SK98LIN
-	tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support (DEPRECATED)"
-	depends on PCI
-	---help---
-	  Say Y here if you have a Marvell Yukon or SysKonnect SK-98xx/SK-95xx
-	  compliant Gigabit Ethernet Adapter.
-
-	  This driver supports the original Yukon chipset. This driver is
-	  deprecated and will be removed from the kernel in the near future,
-	  it has been replaced by the skge driver. skge is cleaner and
-	  seems to work better.
-
-	  This driver does not support the newer Yukon2 chipset. A separate
-	  driver, sky2, is provided to support Yukon2-based adapters.
-
-	  The following adapters are supported by this driver:
-	    - 3Com 3C940 Gigabit LOM Ethernet Adapter
-	    - 3Com 3C941 Gigabit LOM Ethernet Adapter
-	    - Allied Telesyn AT-2970LX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970LX/2SC Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970SX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970SX/2SC Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970TX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2970TX/2TX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2971SX Gigabit Ethernet Adapter
-	    - Allied Telesyn AT-2971T Gigabit Ethernet Adapter
-	    - Belkin Gigabit Desktop Card 10/100/1000Base-T Adapter, Copper RJ-45
-	    - EG1032 v2 Instant Gigabit Network Adapter
-	    - EG1064 v2 Instant Gigabit Network Adapter
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Abit)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Albatron)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Asus)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (ECS)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Epox)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Foxconn)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Gigabyte)
-	    - Marvell 88E8001 Gigabit LOM Ethernet Adapter (Iwill)
-	    - Marvell 88E8050 Gigabit LOM Ethernet Adapter (Intel)
-	    - Marvell RDK-8001 Adapter
-	    - Marvell RDK-8002 Adapter
-	    - Marvell RDK-8003 Adapter
-	    - Marvell RDK-8004 Adapter
-	    - Marvell RDK-8006 Adapter
-	    - Marvell RDK-8007 Adapter
-	    - Marvell RDK-8008 Adapter
-	    - Marvell RDK-8009 Adapter
-	    - Marvell RDK-8010 Adapter
-	    - Marvell RDK-8011 Adapter
-	    - Marvell RDK-8012 Adapter
-	    - Marvell RDK-8052 Adapter
-	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (32 bit)
-	    - Marvell Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (64 bit)
-	    - N-Way PCI-Bus Giga-Card 1000/100/10Mbps(L)
-	    - SK-9521 10/100/1000Base-T Adapter
-	    - SK-9521 V2.0 10/100/1000Base-T Adapter
-	    - SK-9821 Gigabit Ethernet Server Adapter (SK-NET GE-T)
-	    - SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T Adapter
-	    - SK-9822 Gigabit Ethernet Server Adapter (SK-NET GE-T dual link)
-	    - SK-9841 Gigabit Ethernet Server Adapter (SK-NET GE-LX)
-	    - SK-9841 V2.0 Gigabit Ethernet 1000Base-LX Adapter
-	    - SK-9842 Gigabit Ethernet Server Adapter (SK-NET GE-LX dual link)
-	    - SK-9843 Gigabit Ethernet Server Adapter (SK-NET GE-SX)
-	    - SK-9843 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-	    - SK-9844 Gigabit Ethernet Server Adapter (SK-NET GE-SX dual link)
-	    - SK-9851 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-	    - SK-9861 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition)
-	    - SK-9861 V2.0 Gigabit Ethernet 1000Base-SX Adapter
-	    - SK-9862 Gigabit Ethernet Server Adapter (SK-NET GE-SX Volition dual link)
-	    - SK-9871 Gigabit Ethernet Server Adapter (SK-NET GE-ZX)
-	    - SK-9871 V2.0 Gigabit Ethernet 1000Base-ZX Adapter
-	    - SK-9872 Gigabit Ethernet Server Adapter (SK-NET GE-ZX dual link)
-	    - SMC EZ Card 1000 (SMC9452TXV.2)
-	  
-	  The adapters support Jumbo Frames.
-	  The dual link adapters support link-failover and dual port features.
-	  Both Marvell Yukon and SysKonnect SK-98xx/SK-95xx adapters support 
-	  the scatter-gather functionality with sendfile(). Please refer to 
-	  <file:Documentation/networking/sk98lin.txt> for more information about
-	  optional driver parameters.
-	  Questions concerning this driver may be addressed to:
-	      <linux@syskonnect.de>
-	  
-	  If you want to compile this driver as a module ( = code which can be
-	  inserted in and removed from the running kernel whenever you want),
-	  say M here and read <file:Documentation/kbuild/modules.txt>. The module will
-	  be called sk98lin. This is recommended.
-
 config VIA_VELOCITY
 	tristate "VIA Velocity support"
 	depends on PCI

drivers/net/Makefile

@@ -63,7 +63,6 @@ obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
 obj-$(CONFIG_TC35815) += tc35815.o
 obj-$(CONFIG_SKGE) += skge.o
 obj-$(CONFIG_SKY2) += sky2.o
-obj-$(CONFIG_SK98LIN) += sk98lin/
 obj-$(CONFIG_SKFP) += skfp/
 obj-$(CONFIG_VIA_RHINE) += via-rhine.o
 obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o

drivers/net/sk98lin/Makefile

-#
-# Makefile for the SysKonnect SK-98xx device driver.
-#
-
-
-#
-# Standalone driver params
-# SKPARAM += -DSK_KERNEL_24
-# SKPARAM += -DSK_KERNEL_24_26
-# SKPARAM += -DSK_KERNEL_26
-# SKPARAM += -DSK_KERNEL_22_24
-
-obj-$(CONFIG_SK98LIN) += sk98lin.o
-sk98lin-objs    :=	\
-		skge.o		\
-		skethtool.o	\
-		skdim.o		\
-		skaddr.o	\
-		skgehwt.o	\
-		skgeinit.o	\
-		skgepnmi.o	\
-		skgesirq.o	\
-		ski2c.o		\
-		sklm80.o	\
-		skqueue.o	\
-		skrlmt.o	\
-		sktimer.o	\
-		skvpd.o		\
-		skxmac2.o
-
-# DBGDEF =  \
-# -DDEBUG
-
-ifdef DEBUG
-DBGDEF +=  \
--DSK_DEBUG_CHKMOD=0x00000000L \
--DSK_DEBUG_CHKCAT=0x00000000L
-endif
-
-
-# **** possible debug modules for SK_DEBUG_CHKMOD *****************
-# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
-# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
-# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
-# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
-# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
-# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
-# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
-# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
-# SK_DBGMOD_DRV         0x00010000L     /* DRV module */
-
-# **** possible debug categories for SK_DEBUG_CHKCAT **************
-# *** common modules ***
-# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
-# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
-# SK_DBGCAT_ERR         0x00000004L     error handling paths
-# SK_DBGCAT_TX          0x00000008L     transmit path
-# SK_DBGCAT_RX          0x00000010L     receive path
-# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
-# SK_DBGCAT_QUEUE       0x00000040L     any queue management
-# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
-# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump
-
-# *** driver (file skge.c) ***
-# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
-# SK_DBGCAT_DRV_???             0x00020000      not used
-# SK_DBGCAT_DRV_MCA             0x00040000      multicast
-# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
-# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
-# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
-# SK_DBGCAT_DRV_???             0x00400000      not used
-# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
-# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
-# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
-# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
-# SK_DBGCAT_DRV_EVENT           0x08000000      driver events
-
-EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
-
-clean:
-	rm -f core *.o *.a *.s
-
-
-
-
-
-

drivers/net/sk98lin/h/lm80.h

-/******************************************************************************
- *
- * Name:	lm80.h	
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.6 $
- * Date:	$Date: 2003/05/13 17:26:52 $
- * Purpose:	Contains all defines for the LM80 Chip
- *		(National Semiconductor).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_LM80_H
-#define __INC_LM80_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* __cplusplus */
-
-/* defines ********************************************************************/
-
-/*
- * LM80 register definition
- *
- * All registers are 8 bit wide
- */
-#define LM80_CFG			0x00	/* Configuration Register */
-#define LM80_ISRC_1			0x01	/* Interrupt Status Register 1 */
-#define LM80_ISRC_2			0x02	/* Interrupt Status Register 2 */
-#define LM80_IMSK_1			0x03	/* Interrupt Mask Register 1 */
-#define LM80_IMSK_2			0x04	/* Interrupt Mask Register 2 */
-#define LM80_FAN_CTRL		0x05	/* Fan Devisor/RST#/OS# Register */
-#define LM80_TEMP_CTRL		0x06	/* OS# Config, Temp Res. Reg */
-	/* 0x07 - 0x1f reserved	*/
-	/* current values */
-#define LM80_VT0_IN			0x20	/* current Voltage 0 value */
-#define LM80_VT1_IN			0x21	/* current Voltage 1 value */
-#define LM80_VT2_IN			0x22	/* current Voltage 2 value */
-#define LM80_VT3_IN			0x23	/* current Voltage 3 value */
-#define LM80_VT4_IN			0x24	/* current Voltage 4 value */
-#define LM80_VT5_IN			0x25	/* current Voltage 5 value */
-#define LM80_VT6_IN			0x26	/* current Voltage 6 value */
-#define LM80_TEMP_IN		0x27	/* current Temperature value */
-#define LM80_FAN1_IN		0x28	/* current Fan 1 count */
-#define LM80_FAN2_IN		0x29	/* current Fan 2 count */
-	/* limit values */
-#define LM80_VT0_HIGH_LIM	0x2a	/* high limit val for Voltage 0 */
-#define LM80_VT0_LOW_LIM	0x2b	/* low limit val for Voltage 0 */
-#define LM80_VT1_HIGH_LIM	0x2c	/* high limit val for Voltage 1 */
-#define LM80_VT1_LOW_LIM	0x2d	/* low limit val for Voltage 1 */
-#define LM80_VT2_HIGH_LIM	0x2e	/* high limit val for Voltage 2 */
-#define LM80_VT2_LOW_LIM	0x2f	/* low limit val for Voltage 2 */
-#define LM80_VT3_HIGH_LIM	0x30	/* high limit val for Voltage 3 */
-#define LM80_VT3_LOW_LIM	0x31	/* low limit val for Voltage 3 */
-#define LM80_VT4_HIGH_LIM	0x32	/* high limit val for Voltage 4 */
-#define LM80_VT4_LOW_LIM	0x33	/* low limit val for Voltage 4 */
-#define LM80_VT5_HIGH_LIM	0x34	/* high limit val for Voltage 5 */
-#define LM80_VT5_LOW_LIM	0x35	/* low limit val for Voltage 5 */
-#define LM80_VT6_HIGH_LIM	0x36	/* high limit val for Voltage 6 */
-#define LM80_VT6_LOW_LIM	0x37	/* low limit val for Voltage 6 */
-#define LM80_THOT_LIM_UP	0x38	/* hot temperature limit (high) */
-#define LM80_THOT_LIM_LO	0x39	/* hot temperature limit (low) */
-#define LM80_TOS_LIM_UP		0x3a	/* OS temperature limit (high) */
-#define LM80_TOS_LIM_LO		0x3b	/* OS temperature limit (low) */
-#define LM80_FAN1_COUNT_LIM	0x3c	/* Fan 1 count limit (high) */
-#define LM80_FAN2_COUNT_LIM	0x3d	/* Fan 2 count limit (low) */
-	/* 0x3e - 0x3f reserved	*/
-
-/*
- * LM80 bit definitions
- */
-
-/*	LM80_CFG		Configuration Register */
-#define LM80_CFG_START		(1<<0)	/* start monitoring operation */
-#define LM80_CFG_INT_ENA	(1<<1)	/* enables the INT# Interrupt output */
-#define LM80_CFG_INT_POL	(1<<2)	/* INT# pol: 0 act low, 1 act high */
-#define LM80_CFG_INT_CLR	(1<<3)	/* disables INT#/RST_OUT#/OS# outputs */
-#define LM80_CFG_RESET		(1<<4)	/* signals a reset */
-#define LM80_CFG_CHASS_CLR	(1<<5)	/* clears Chassis Intrusion (CI) pin */
-#define LM80_CFG_GPO		(1<<6)	/* drives the GPO# pin */
-#define LM80_CFG_INIT		(1<<7)	/* restore power on defaults */
-
-/*	LM80_ISRC_1		Interrupt Status Register 1 */
-/*	LM80_IMSK_1		Interrupt Mask Register 1 */
-#define LM80_IS_VT0			(1<<0)	/* limit exceeded for Voltage 0 */
-#define LM80_IS_VT1			(1<<1)	/* limit exceeded for Voltage 1 */
-#define LM80_IS_VT2			(1<<2)	/* limit exceeded for Voltage 2 */
-#define LM80_IS_VT3			(1<<3)	/* limit exceeded for Voltage 3 */
-#define LM80_IS_VT4			(1<<4)	/* limit exceeded for Voltage 4 */
-#define LM80_IS_VT5			(1<<5)	/* limit exceeded for Voltage 5 */
-#define LM80_IS_VT6			(1<<6)	/* limit exceeded for Voltage 6 */
-#define LM80_IS_INT_IN		(1<<7)	/* state of INT_IN# */
-
-/*	LM80_ISRC_2		Interrupt Status Register 2 */
-/*	LM80_IMSK_2		Interrupt Mask Register 2 */
-#define LM80_IS_TEMP		(1<<0)	/* HOT temperature limit exceeded */
-#define LM80_IS_BTI			(1<<1)	/* state of BTI# pin */
-#define LM80_IS_FAN1		(1<<2)	/* count limit exceeded for Fan 1 */
-#define LM80_IS_FAN2		(1<<3)	/* count limit exceeded for Fan 2 */
-#define LM80_IS_CI			(1<<4)	/* Chassis Intrusion occured */
-#define LM80_IS_OS			(1<<5)	/* OS temperature limit exceeded */
-	/* bit 6 and 7 are reserved in LM80_ISRC_2 */
-#define LM80_IS_HT_IRQ_MD	(1<<6)	/* Hot temperature interrupt mode */
-#define LM80_IS_OT_IRQ_MD	(1<<7)	/* OS temperature interrupt mode */
-
-/*	LM80_FAN_CTRL		Fan Devisor/RST#/OS# Register */
-#define LM80_FAN1_MD_SEL	(1<<0)	/* Fan 1 mode select */
-#define LM80_FAN2_MD_SEL	(1<<1)	/* Fan 2 mode select */
-#define LM80_FAN1_PRM_CTL	(3<<2)	/* Fan 1 speed control */
-#define LM80_FAN2_PRM_CTL	(3<<4)	/* Fan 2 speed control */
-#define LM80_FAN_OS_ENA		(1<<6)	/* enable OS mode on RST_OUT#/OS# pins*/
-#define LM80_FAN_RST_ENA	(1<<7)	/* sets RST_OUT#/OS# pins in RST mode */
-
-/*	LM80_TEMP_CTRL		OS# Config, Temp Res. Reg */
-#define LM80_TEMP_OS_STAT	(1<<0)	/* mirrors the state of RST_OUT#/OS# */
-#define LM80_TEMP_OS_POL	(1<<1)	/* select OS# polarity */
-#define LM80_TEMP_OS_MODE	(1<<2)	/* selects Interrupt mode */
-#define LM80_TEMP_RES		(1<<3)	/* selects 9 or 11 bit temp resulution*/
-#define LM80_TEMP_LSB		(0xf<<4)/* 4 LSBs of 11 bit temp data */
-#define LM80_TEMP_LSB_9		(1<<7)	/* LSB of 9 bit temperature data */
-
-	/* 0x07 - 0x1f reserved	*/
-/*	LM80_VT0_IN		current Voltage 0 value */
-/*	LM80_VT1_IN		current Voltage 1 value */
-/*	LM80_VT2_IN		current Voltage 2 value */
-/*	LM80_VT3_IN		current Voltage 3 value */
-/*	LM80_VT4_IN		current Voltage 4 value */
-/*	LM80_VT5_IN		current Voltage 5 value */
-/*	LM80_VT6_IN		current Voltage 6 value */
-/*	LM80_TEMP_IN		current temperature value */
-/*	LM80_FAN1_IN		current Fan 1 count */
-/*	LM80_FAN2_IN		current Fan 2 count */
-/*	LM80_VT0_HIGH_LIM	high limit val for Voltage 0 */
-/*	LM80_VT0_LOW_LIM	low limit val for Voltage 0 */
-/*	LM80_VT1_HIGH_LIM	high limit val for Voltage 1 */
-/*	LM80_VT1_LOW_LIM	low limit val for Voltage 1 */
-/*	LM80_VT2_HIGH_LIM	high limit val for Voltage 2 */
-/*	LM80_VT2_LOW_LIM	low limit val for Voltage 2 */
-/*	LM80_VT3_HIGH_LIM	high limit val for Voltage 3 */
-/*	LM80_VT3_LOW_LIM	low limit val for Voltage 3 */
-/*	LM80_VT4_HIGH_LIM	high limit val for Voltage 4 */
-/*	LM80_VT4_LOW_LIM	low limit val for Voltage 4 */
-/*	LM80_VT5_HIGH_LIM	high limit val for Voltage 5 */
-/*	LM80_VT5_LOW_LIM	low limit val for Voltage 5 */
-/*	LM80_VT6_HIGH_LIM	high limit val for Voltage 6 */
-/*	LM80_VT6_LOW_LIM	low limit val for Voltage 6 */
-/*	LM80_THOT_LIM_UP	hot temperature limit (high) */
-/*	LM80_THOT_LIM_LO	hot temperature limit (low) */
-/*	LM80_TOS_LIM_UP		OS temperature limit (high) */
-/*	LM80_TOS_LIM_LO		OS temperature limit (low) */
-/*	LM80_FAN1_COUNT_LIM	Fan 1 count limit (high) */
-/*	LM80_FAN2_COUNT_LIM	Fan 2 count limit (low) */
-	/* 0x3e - 0x3f reserved	*/
-
-#define LM80_ADDR		0x28	/* LM80 default addr */
-
-/* typedefs *******************************************************************/
-
-
-/* function prototypes ********************************************************/
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_LM80_H */

drivers/net/sk98lin/h/skaddr.h

-/******************************************************************************
- *
- * Name:	skaddr.h
- * Project:	Gigabit Ethernet Adapters, ADDR-Modul
- * Version:	$Revision: 1.29 $
- * Date:	$Date: 2003/05/13 16:57:24 $
- * Purpose:	Header file for Address Management (MC, UC, Prom).
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This module is intended to manage multicast addresses and promiscuous mode
- * on GEnesis adapters.
- *
- * Include File Hierarchy:
- *
- *	"skdrv1st.h"
- *	...
- *	"sktypes.h"
- *	"skqueue.h"
- *	"skaddr.h"
- *	...
- *	"skdrv2nd.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKADDR_H
-#define __INC_SKADDR_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif	/* cplusplus */
-
-/* defines ********************************************************************/
-
-#define SK_MAC_ADDR_LEN				6	/* Length of MAC address. */
-#define	SK_MAX_ADDRS				14	/* #Addrs for exact match. */
-
-/* ----- Common return values ----- */
-
-#define SK_ADDR_SUCCESS				0	/* Function returned successfully. */
-#define SK_ADDR_ILLEGAL_PORT			100	/* Port number too high. */
-#define SK_ADDR_TOO_EARLY			101	/* Function called too early. */
-
-/* ----- Clear/Add flag bits ----- */
-
-#define SK_ADDR_PERMANENT			1	/* RLMT Address */
-
-/* ----- Additional Clear flag bits ----- */
-
-#define SK_MC_SW_ONLY				2	/* Do not update HW when clearing. */
-
-/* ----- Override flag bits ----- */
-
-#define SK_ADDR_LOGICAL_ADDRESS		0
-#define SK_ADDR_VIRTUAL_ADDRESS		(SK_ADDR_LOGICAL_ADDRESS)	/* old */
-#define SK_ADDR_PHYSICAL_ADDRESS	1
-#define SK_ADDR_CLEAR_LOGICAL		2
-#define SK_ADDR_SET_LOGICAL			4
-
-/* ----- Override return values ----- */
-
-#define SK_ADDR_OVERRIDE_SUCCESS	(SK_ADDR_SUCCESS)
-#define SK_ADDR_DUPLICATE_ADDRESS	1
-#define SK_ADDR_MULTICAST_ADDRESS	2
-
-/* ----- Partitioning of excact match table ----- */
-
-#define SK_ADDR_EXACT_MATCHES		16	/* #Exact match entries. */
-
-#define SK_ADDR_FIRST_MATCH_RLMT	1
-#define SK_ADDR_LAST_MATCH_RLMT		2
-#define SK_ADDR_FIRST_MATCH_DRV		3
-#define SK_ADDR_LAST_MATCH_DRV		(SK_ADDR_EXACT_MATCHES - 1)
-
-/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */
-
-#define SK_MC_FILTERING_EXACT		0	/* Exact filtering. */
-#define SK_MC_FILTERING_INEXACT		1	/* Inexact filtering. */
-
-/* ----- Additional SkAddrMcAdd return values ----- */
-
-#define SK_MC_ILLEGAL_ADDRESS		2	/* Illegal address. */
-#define SK_MC_ILLEGAL_PORT			3	/* Illegal port (not the active one). */
-#define SK_MC_RLMT_OVERFLOW			4	/* Too many RLMT mc addresses. */
-
-/* Promiscuous mode bits ----- */
-
-#define SK_PROM_MODE_NONE			0	/* Normal receive. */
-#define SK_PROM_MODE_LLC			1	/* Receive all LLC frames. */
-#define SK_PROM_MODE_ALL_MC			2	/* Receive all multicast frames. */
-/* #define SK_PROM_MODE_NON_LLC		4 */	/* Receive all non-LLC frames. */
-
-/* Macros */
-
-#ifdef OLD_STUFF
-#ifndef SK_ADDR_EQUAL
-/*
- * "&" instead of "&&" allows better optimization on IA-64.
- * The replacement is safe here, as all bytes exist.
- */
-#ifndef SK_ADDR_DWORD_COMPARE
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \
-	(((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \
-	(((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \
-	(((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \
-	(((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \
-	(((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0]))
-#else	/* SK_ADDR_DWORD_COMPARE */
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \
-	(*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0])))
-#endif	/* SK_ADDR_DWORD_COMPARE */
-#endif	/* SK_ADDR_EQUAL */
-#endif /* 0 */
-
-#ifndef SK_ADDR_EQUAL
-#ifndef SK_ADDR_DWORD_COMPARE
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(((SK_U8 SK_FAR *)(A1))[5] == ((SK_U8 SK_FAR *)(A2))[5]) & \
-	(((SK_U8 SK_FAR *)(A1))[4] == ((SK_U8 SK_FAR *)(A2))[4]) & \
-	(((SK_U8 SK_FAR *)(A1))[3] == ((SK_U8 SK_FAR *)(A2))[3]) & \
-	(((SK_U8 SK_FAR *)(A1))[2] == ((SK_U8 SK_FAR *)(A2))[2]) & \
-	(((SK_U8 SK_FAR *)(A1))[1] == ((SK_U8 SK_FAR *)(A2))[1]) & \
-	(((SK_U8 SK_FAR *)(A1))[0] == ((SK_U8 SK_FAR *)(A2))[0]))
-#else	/* SK_ADDR_DWORD_COMPARE */
-#define SK_ADDR_EQUAL(A1,A2)	( \
-	(*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[4]) == \
-	*(SK_U16 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[4])) && \
-	(*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A1))[0]) == \
-	*(SK_U32 SK_FAR *)&(((SK_U8 SK_FAR *)(A2))[0])))
-#endif	/* SK_ADDR_DWORD_COMPARE */
-#endif	/* SK_ADDR_EQUAL */
-
-/* typedefs *******************************************************************/
-
-typedef struct s_MacAddr {
-	SK_U8	a[SK_MAC_ADDR_LEN];
-} SK_MAC_ADDR;
-
-
-/* SK_FILTER is used to ensure alignment of the filter. */
-typedef union s_InexactFilter {
-	SK_U8	Bytes[8];
-	SK_U64	Val;	/* Dummy entry for alignment only. */
-} SK_FILTER64;
-
-
-typedef struct s_AddrNet SK_ADDR_NET;
-
-
-typedef struct s_AddrPort {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_MAC_ADDR	CurrentMacAddress;	/* Current physical MAC Address. */
-	SK_MAC_ADDR	PermanentMacAddress;	/* Permanent physical MAC Address. */
-	int		PromMode;		/* Promiscuous Mode. */
-
-/* ----- Private part ----- */
-
-	SK_MAC_ADDR	PreviousMacAddress;	/* Prev. phys. MAC Address. */
-	SK_BOOL		CurrentMacAddressSet;	/* CurrentMacAddress is set. */
-	SK_U8		Align01;
-
-	SK_U32		FirstExactMatchRlmt;
-	SK_U32		NextExactMatchRlmt;
-	SK_U32		FirstExactMatchDrv;
-	SK_U32		NextExactMatchDrv;
-	SK_MAC_ADDR	Exact[SK_ADDR_EXACT_MATCHES];
-	SK_FILTER64	InexactFilter;			/* For 64-bit hash register. */
-	SK_FILTER64	InexactRlmtFilter;		/* For 64-bit hash register. */
-	SK_FILTER64	InexactDrvFilter;		/* For 64-bit hash register. */
-} SK_ADDR_PORT;
-
-
-struct s_AddrNet {
-/* ----- Public part (read-only) ----- */
-
-	SK_MAC_ADDR		CurrentMacAddress;	/* Logical MAC Address. */
-	SK_MAC_ADDR		PermanentMacAddress;	/* Logical MAC Address. */
-
-/* ----- Private part ----- */
-
-	SK_U32			ActivePort;		/* View of module ADDR. */
-	SK_BOOL			CurrentMacAddressSet;	/* CurrentMacAddress is set. */
-	SK_U8			Align01;
-	SK_U16			Align02;
-};
-
-
-typedef struct s_Addr {
-
-/* ----- Public part (read-only) ----- */
-
-	SK_ADDR_NET		Net[SK_MAX_NETS];
-	SK_ADDR_PORT	Port[SK_MAX_MACS];
-
-/* ----- Private part ----- */
-} SK_ADDR;
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_KR_PROTO
-
-/* Functions provided by SkAddr */
-
-/* ANSI/C++ compliant function prototypes */
-
-extern	int	SkAddrInit(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	int	Level);
-
-extern	int	SkAddrMcClear(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	PortNumber,
-	int	Flags);
-
-extern	int	SkAddrMcAdd(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	SK_U32		PortNumber,
-	SK_MAC_ADDR	*pMc,
-	int		Flags);
-
-extern	int	SkAddrMcUpdate(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	PortNumber);
-
-extern	int	SkAddrOverride(
-	SK_AC		*pAC,
-	SK_IOC		IoC,
-	SK_U32		PortNumber,
-	SK_MAC_ADDR	SK_FAR *pNewAddr,
-	int		Flags);
-
-extern	int	SkAddrPromiscuousChange(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	PortNumber,
-	int	NewPromMode);
-
-#ifndef SK_SLIM
-extern	int	SkAddrSwap(
-	SK_AC	*pAC,
-	SK_IOC	IoC,
-	SK_U32	FromPortNumber,
-	SK_U32	ToPortNumber);
-#endif
-
-#else	/* defined(SK_KR_PROTO)) */
-
-/* Non-ANSI/C++ compliant function prototypes */
-
-#error KR-style prototypes are not yet provided.
-
-#endif	/* defined(SK_KR_PROTO)) */
-
-
-#ifdef __cplusplus
-}
-#endif	/* __cplusplus */
-
-#endif	/* __INC_SKADDR_H */

drivers/net/sk98lin/h/skcsum.h

-/******************************************************************************
- *
- * Name:	skcsum.h
- * Project:	GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx)
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/08/20 13:59:57 $
- * Purpose:	Store/verify Internet checksum in send/receive packets.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2001 SysKonnect GmbH.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * Public header file for the "GEnesis" common module "CSUM".
- *
- * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
- * and is the code name of this SysKonnect project.
- *
- * Compilation Options:
- *
- *	SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
- *	empty module.
- *
- *	SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
- *	definitions. In this case, all SKCS_PROTO_xxx definitions must be made
- *	external.
- *
- *	SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
- *	definitions. In this case, all SKCS_STATUS_xxx definitions must be made
- *	external.
- *
- * Include File Hierarchy:
- *
- *	"h/skcsum.h"
- *	 "h/sktypes.h"
- *	 "h/skqueue.h"
- *
- ******************************************************************************/
-
-#ifndef __INC_SKCSUM_H
-#define __INC_SKCSUM_H
-
-#include "h/sktypes.h"
-#include "h/skqueue.h"
-
-/* defines ********************************************************************/
-
-/*
- * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags'  if no user
- * overwrite.
- */
-#ifndef SKCS_OVERWRITE_PROTO	/* User overwrite? */
-#define SKCS_PROTO_IP	0x1	/* IP (Internet Protocol version 4) */
-#define SKCS_PROTO_TCP	0x2	/* TCP (Transmission Control Protocol) */
-#define SKCS_PROTO_UDP	0x4	/* UDP (User Datagram Protocol) */
-
-/* Indices for protocol statistics. */
-#define SKCS_PROTO_STATS_IP	0
-#define SKCS_PROTO_STATS_UDP	1
-#define SKCS_PROTO_STATS_TCP	2
-#define SKCS_NUM_PROTOCOLS	3	/* Number of supported protocols. */
-#endif	/* !SKCS_OVERWRITE_PROTO */
-
-/*
- * Define the default SKCS_STATUS type and values if no user overwrite.
- *
- *	SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
- *	SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
- *	SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
- *	SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
- *	SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
- *	SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
- *	SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
- *	SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
- *	SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
- *	SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
- *	SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. 
- */
-#ifndef SKCS_OVERWRITE_STATUS	/* User overwrite? */
-#define SKCS_STATUS	int	/* Define status type. */
-
-#define SKCS_STATUS_UNKNOWN_IP_VERSION	1
-#define SKCS_STATUS_IP_CSUM_ERROR		2
-#define SKCS_STATUS_IP_FRAGMENT			3
-#define SKCS_STATUS_IP_CSUM_OK			4
-#define SKCS_STATUS_TCP_CSUM_ERROR		5
-#define SKCS_STATUS_UDP_CSUM_ERROR		6
-#define SKCS_STATUS_TCP_CSUM_OK			7
-#define SKCS_STATUS_UDP_CSUM_OK			8
-/* needed for Microsoft */
-#define SKCS_STATUS_IP_CSUM_ERROR_UDP	9
-#define SKCS_STATUS_IP_CSUM_ERROR_TCP	10
-/* UDP checksum may be omitted */
-#define SKCS_STATUS_IP_CSUM_OK_NO_UDP	11
-#endif	/* !SKCS_OVERWRITE_STATUS */
-
-/* Clear protocol statistics event. */
-#define SK_CSUM_EVENT_CLEAR_PROTO_STATS	1
-
-/*
- * Add two values in one's complement.
- *
- * Note: One of the two input values may be "longer" than 16-bit, but then the
- * resulting sum may be 17 bits long. In this case, add zero to the result using
- * SKCS_OC_ADD() again.
- *
- *	Result = Value1 + Value2
- */
-#define SKCS_OC_ADD(Result, Value1, Value2) {				\
-	unsigned long Sum;						\
-									\
-	Sum = (unsigned long) (Value1) + (unsigned long) (Value2);	\
-	/* Add-in any carry. */						\
-	(Result) = (Sum & 0xffff) + (Sum >> 16);			\
-}
-
-/*
- * Subtract two values in one's complement.
- *
- *	Result = Value1 - Value2
- */
-#define SKCS_OC_SUB(Result, Value1, Value2)	\
-	SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff)
-
-/* typedefs *******************************************************************/
-
-/*
- * SKCS_PROTO_STATS - The CSUM protocol statistics structure.
- *
- * There is one instance of this structure for each protocol supported.
- */
-typedef struct s_CsProtocolStatistics {
-	SK_U64 RxOkCts;		/* Receive checksum ok. */
-	SK_U64 RxUnableCts;	/* Unable to verify receive checksum. */
-	SK_U64 RxErrCts;	/* Receive checksum error. */
-	SK_U64 TxOkCts;		/* Transmit checksum ok. */
-	SK_U64 TxUnableCts;	/* Unable to calculate checksum in hw. */
-} SKCS_PROTO_STATS;
-
-/*
- * s_Csum - The CSUM module context structure.
- */
-typedef struct s_Csum {
-	/* Enabled receive SK_PROTO_XXX bit flags. */
-	unsigned ReceiveFlags[SK_MAX_NETS];
-#ifdef TX_CSUM
-	unsigned TransmitFlags[SK_MAX_NETS];
-#endif /* TX_CSUM */
-
-	/* The protocol statistics structure; one per supported protocol. */
-	SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS];
-} SK_CSUM;
-
-/*
- * SKCS_PACKET_INFO - The packet information structure.
- */
-typedef struct s_CsPacketInfo {
-	/* Bit field specifiying the desired/found protocols. */
-	unsigned ProtocolFlags;
-
-	/* Length of complete IP header, including any option fields. */
-	unsigned IpHeaderLength;
-
-	/* IP header checksum. */
-	unsigned IpHeaderChecksum;
-
-	/* TCP/UDP pseudo header checksum. */
-	unsigned PseudoHeaderChecksum;
-} SKCS_PACKET_INFO;
-
-/* function prototypes ********************************************************/
-
-#ifndef SK_CS_CALCULATE_CHECKSUM
-extern unsigned SkCsCalculateChecksum(
-	void		*pData,
-	unsigned	Length);
-#endif /* SK_CS_CALCULATE_CHECKSUM */
-
-extern int SkCsEvent(
-	SK_AC		*pAc,
-	SK_IOC		Ioc,
-	SK_U32		Event,
-	SK_EVPARA	Param);
-
-extern SKCS_STATUS SkCsGetReceiveInfo(
-	SK_AC		*pAc,
-	void		*pIpHeader,
-	unsigned	Checksum1,
-	unsigned	Checksum2,
-	int			NetNumber);
-
-extern void SkCsSetReceiveFlags(
-	SK_AC		*pAc,
-	unsigned	ReceiveFlags,
-	unsigned	*pChecksum1Offset,
-	unsigned	*pChecksum2Offset,
-	int			NetNumber);
-
-#endif	/* __INC_SKCSUM_H */

drivers/net/sk98lin/h/skdebug.h

-/******************************************************************************
- *
- * Name:	skdebug.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.14 $
- * Date:	$Date: 2003/05/13 17:26:00 $
- * Purpose:	SK specific DEBUG support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDEBUG_H
-#define __INC_SKDEBUG_H
-
-#ifdef	DEBUG
-#ifndef SK_DBG_MSG
-#define SK_DBG_MSG(pAC,comp,cat,arg) \
-		if ( ((comp) & SK_DBG_CHKMOD(pAC)) && 	\
-		      ((cat) & SK_DBG_CHKCAT(pAC)) ) { 	\
-			SK_DBG_PRINTF arg ;		\
-		}
-#endif
-#else
-#define SK_DBG_MSG(pAC,comp,lev,arg)
-#endif
-
-/* PLS NOTE:
- * =========
- * Due to any restrictions of kernel printf routines do not use other
- * format identifiers as: %x %d %c %s .
- * Never use any combined format identifiers such as: %lx %ld in your
- * printf - argument (arg) because some OS specific kernel printfs may
- * only support some basic identifiers.
- */
-
-/* Debug modules */
-
-#define SK_DBGMOD_MERR	0x00000001L	/* general module error indication */
-#define SK_DBGMOD_HWM	0x00000002L	/* Hardware init module */
-#define SK_DBGMOD_RLMT	0x00000004L	/* RLMT module */
-#define SK_DBGMOD_VPD	0x00000008L	/* VPD module */
-#define SK_DBGMOD_I2C	0x00000010L	/* I2C module */
-#define SK_DBGMOD_PNMI	0x00000020L	/* PNMI module */
-#define SK_DBGMOD_CSUM	0x00000040L	/* CSUM module */
-#define SK_DBGMOD_ADDR	0x00000080L	/* ADDR module */
-#define SK_DBGMOD_PECP	0x00000100L	/* PECP module */
-#define SK_DBGMOD_POWM	0x00000200L	/* Power Management module */
-
-/* Debug events */
-
-#define SK_DBGCAT_INIT	0x00000001L	/* module/driver initialization */
-#define SK_DBGCAT_CTRL	0x00000002L	/* controlling devices */
-#define SK_DBGCAT_ERR	0x00000004L	/* error handling paths */
-#define SK_DBGCAT_TX	0x00000008L	/* transmit path */
-#define SK_DBGCAT_RX	0x00000010L	/* receive path */
-#define SK_DBGCAT_IRQ	0x00000020L	/* general IRQ handling */
-#define SK_DBGCAT_QUEUE	0x00000040L	/* any queue management */
-#define SK_DBGCAT_DUMP	0x00000080L	/* large data output e.g. hex dump */
-#define SK_DBGCAT_FATAL	0x00000100L	/* fatal error */
-
-#endif	/* __INC_SKDEBUG_H */

drivers/net/sk98lin/h/skdrv1st.h

-/******************************************************************************
- *
- * Name:	skdrv1st.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.4 $
- * Date:	$Date: 2003/11/12 14:28:14 $
- * Purpose:	First header file for driver and all other modules
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the first include file of the driver, which includes all
- * neccessary system header files and some of the GEnesis header files.
- * It also defines some basic items.
- *
- * Include File Hierarchy:
- *
- *	see skge.c
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDRV1ST_H
-#define __INC_SKDRV1ST_H
-
-typedef struct s_AC	SK_AC;
-
-/* Set card versions */
-#define SK_FAR
-
-/* override some default functions with optimized linux functions */
-
-#define SK_PNMI_STORE_U16(p,v)		memcpy((char*)(p),(char*)&(v),2)
-#define SK_PNMI_STORE_U32(p,v)		memcpy((char*)(p),(char*)&(v),4)
-#define SK_PNMI_STORE_U64(p,v)		memcpy((char*)(p),(char*)&(v),8)
-#define SK_PNMI_READ_U16(p,v)		memcpy((char*)&(v),(char*)(p),2)
-#define SK_PNMI_READ_U32(p,v)		memcpy((char*)&(v),(char*)(p),4)
-#define SK_PNMI_READ_U64(p,v)		memcpy((char*)&(v),(char*)(p),8)
-
-#define SK_ADDR_EQUAL(a1,a2)		(!memcmp(a1,a2,6))
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <net/checksum.h>
-
-#define SK_CS_CALCULATE_CHECKSUM
-#ifndef CONFIG_X86_64
-#define SkCsCalculateChecksum(p,l)	((~ip_compute_csum(p, l)) & 0xffff)
-#else
-#define SkCsCalculateChecksum(p,l)	((~ip_fast_csum(p, l)) & 0xffff)
-#endif
-
-#include	"h/sktypes.h"
-#include	"h/skerror.h"
-#include	"h/skdebug.h"
-#include	"h/lm80.h"
-#include	"h/xmac_ii.h"
-
-#ifdef __LITTLE_ENDIAN
-#define SK_LITTLE_ENDIAN
-#else
-#define SK_BIG_ENDIAN
-#endif
-
-#define SK_NET_DEVICE	net_device
-
-
-/* we use gethrtime(), return unit: nanoseconds */
-#define SK_TICKS_PER_SEC	100
-
-#define	SK_MEM_MAPPED_IO
-
-// #define SK_RLMT_SLOW_LOOKAHEAD
-
-#define SK_MAX_MACS		2
-#define SK_MAX_NETS		2
-
-#define SK_IOC			char __iomem *
-
-typedef struct s_DrvRlmtMbuf SK_MBUF;
-
-#define	SK_CONST64	INT64_C
-#define	SK_CONSTU64	UINT64_C
-
-#define SK_MEMCPY(dest,src,size)	memcpy(dest,src,size)
-#define SK_MEMCMP(s1,s2,size)		memcmp(s1,s2,size)
-#define SK_MEMSET(dest,val,size)	memset(dest,val,size)
-#define SK_STRLEN(pStr)			strlen((char*)(pStr))
-#define SK_STRNCPY(pDest,pSrc,size)	strncpy((char*)(pDest),(char*)(pSrc),size)
-#define SK_STRCMP(pStr1,pStr2)		strcmp((char*)(pStr1),(char*)(pStr2))
-
-/* macros to access the adapter */
-#define SK_OUT8(b,a,v)		writeb((v), ((b)+(a)))	
-#define SK_OUT16(b,a,v)		writew((v), ((b)+(a)))	
-#define SK_OUT32(b,a,v)		writel((v), ((b)+(a)))	
-#define SK_IN8(b,a,pv)		(*(pv) = readb((b)+(a)))
-#define SK_IN16(b,a,pv)		(*(pv) = readw((b)+(a)))
-#define SK_IN32(b,a,pv)		(*(pv) = readl((b)+(a)))
-
-#define int8_t		char
-#define int16_t		short
-#define int32_t		long
-#define int64_t		long long
-#define uint8_t		u_char
-#define uint16_t	u_short
-#define uint32_t	u_long
-#define uint64_t	unsigned long long
-#define t_scalar_t	int
-#define t_uscalar_t	unsigned int
-#define uintptr_t	unsigned long
-
-#define __CONCAT__(A,B) A##B
-
-#define INT32_C(a)		__CONCAT__(a,L)
-#define INT64_C(a)		__CONCAT__(a,LL)
-#define UINT32_C(a)		__CONCAT__(a,UL)
-#define UINT64_C(a)		__CONCAT__(a,ULL)
-
-#ifdef DEBUG
-#define SK_DBG_PRINTF		printk
-#ifndef SK_DEBUG_CHKMOD
-#define SK_DEBUG_CHKMOD		0
-#endif
-#ifndef SK_DEBUG_CHKCAT
-#define SK_DEBUG_CHKCAT		0
-#endif
-/* those come from the makefile */
-#define SK_DBG_CHKMOD(pAC)	(SK_DEBUG_CHKMOD)
-#define SK_DBG_CHKCAT(pAC)	(SK_DEBUG_CHKCAT)
-
-extern void SkDbgPrintf(const char *format,...);
-
-#define SK_DBGMOD_DRV			0x00010000
-
-/**** possible driver debug categories ********************************/
-#define SK_DBGCAT_DRV_ENTRY		0x00010000
-#define SK_DBGCAT_DRV_SAP		0x00020000
-#define SK_DBGCAT_DRV_MCA		0x00040000
-#define SK_DBGCAT_DRV_TX_PROGRESS	0x00080000
-#define SK_DBGCAT_DRV_RX_PROGRESS	0x00100000
-#define SK_DBGCAT_DRV_PROGRESS		0x00200000
-#define SK_DBGCAT_DRV_MSG		0x00400000
-#define SK_DBGCAT_DRV_PROM		0x00800000
-#define SK_DBGCAT_DRV_TX_FRAME		0x01000000
-#define SK_DBGCAT_DRV_ERROR		0x02000000
-#define SK_DBGCAT_DRV_INT_SRC		0x04000000
-#define SK_DBGCAT_DRV_EVENT		0x08000000
-
-#endif
-
-#define SK_ERR_LOG		SkErrorLog
-
-extern void SkErrorLog(SK_AC*, int, int, char*);
-
-#endif
-

drivers/net/sk98lin/h/skdrv2nd.h

-/******************************************************************************
- *
- * Name:	skdrv2nd.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/12/11 16:04:45 $
- * Purpose:	Second header file for driver and all other modules
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the second include file of the driver, which includes all other
- * neccessary files and defines all structures and constants used by the
- * driver and the common modules.
- *
- * Include File Hierarchy:
- *
- *	see skge.c
- *
- ******************************************************************************/
-
-#ifndef __INC_SKDRV2ND_H
-#define __INC_SKDRV2ND_H
-
-#include "h/skqueue.h"
-#include "h/skgehwt.h"
-#include "h/sktimer.h"
-#include "h/ski2c.h"
-#include "h/skgepnmi.h"
-#include "h/skvpd.h"
-#include "h/skgehw.h"
-#include "h/skgeinit.h"
-#include "h/skaddr.h"
-#include "h/skgesirq.h"
-#include "h/skcsum.h"
-#include "h/skrlmt.h"
-#include "h/skgedrv.h"
-
-
-extern SK_MBUF		*SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned);
-extern void		SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*);
-extern SK_U64		SkOsGetTime(SK_AC*);
-extern int		SkPciReadCfgDWord(SK_AC*, int, SK_U32*);
-extern int		SkPciReadCfgWord(SK_AC*, int, SK_U16*);
-extern int		SkPciReadCfgByte(SK_AC*, int, SK_U8*);
-extern int		SkPciWriteCfgWord(SK_AC*, int, SK_U16);
-extern int		SkPciWriteCfgByte(SK_AC*, int, SK_U8);
-extern int		SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA);
-
-#ifdef SK_DIAG_SUPPORT
-extern int		SkDrvEnterDiagMode(SK_AC *pAc);
-extern int		SkDrvLeaveDiagMode(SK_AC *pAc);
-#endif
-
-struct s_DrvRlmtMbuf {
-	SK_MBUF		*pNext;		/* Pointer to next RLMT Mbuf. */
-	SK_U8		*pData;		/* Data buffer (virtually contig.). */
-	unsigned	Size;		/* Data buffer size. */
-	unsigned	Length;		/* Length of packet (<= Size). */
-	SK_U32		PortIdx;	/* Receiving/transmitting port. */
-#ifdef SK_RLMT_MBUF_PRIVATE
-	SK_RLMT_MBUF	Rlmt;		/* Private part for RLMT. */
-#endif  /* SK_RLMT_MBUF_PRIVATE */
-	struct sk_buff	*pOs;		/* Pointer to message block */
-};
-
-
-/*
- * Time macros
- */
-#if SK_TICKS_PER_SEC == 100
-#define SK_PNMI_HUNDREDS_SEC(t)	(t)
-#else
-#define SK_PNMI_HUNDREDS_SEC(t)	((((unsigned long)t) * 100) / \
-										(SK_TICKS_PER_SEC))
-#endif
-
-/*
- * New SkOsGetTime
- */
-#define SkOsGetTimeCurrent(pAC, pUsec) {\
-	struct timeval t;\
-	do_gettimeofday(&t);\
-	*pUsec = ((((t.tv_sec) * 1000000L)+t.tv_usec)/10000);\
-}
-
-
-/*
- * ioctl definitions
- */
-#define		SK_IOCTL_BASE		(SIOCDEVPRIVATE)
-#define		SK_IOCTL_GETMIB		(SK_IOCTL_BASE + 0)
-#define		SK_IOCTL_SETMIB		(SK_IOCTL_BASE + 1)
-#define		SK_IOCTL_PRESETMIB	(SK_IOCTL_BASE + 2)
-#define		SK_IOCTL_GEN		(SK_IOCTL_BASE + 3)
-#define		SK_IOCTL_DIAG		(SK_IOCTL_BASE + 4)
-
-typedef struct s_IOCTL	SK_GE_IOCTL;
-
-struct s_IOCTL {
-	char __user *	pData;
-	unsigned int	Len;
-};
-
-
-/*
- * define sizes of descriptor rings in bytes
- */
-
-#define		TX_RING_SIZE	(8*1024)
-#define		RX_RING_SIZE	(24*1024)
-
-/*
- * Buffer size for ethernet packets
- */
-#define	ETH_BUF_SIZE	1540
-#define	ETH_MAX_MTU	1514
-#define ETH_MIN_MTU	60
-#define ETH_MULTICAST_BIT	0x01
-#define SK_JUMBO_MTU	9000
-
-/*
- * transmit priority selects the queue: LOW=asynchron, HIGH=synchron
- */
-#define TX_PRIO_LOW	0
-#define TX_PRIO_HIGH	1
-
-/*
- * alignment of rx/tx descriptors
- */
-#define DESCR_ALIGN	64
-
-/*
- * definitions for pnmi. TODO
- */
-#define SK_DRIVER_RESET(pAC, IoC)	0
-#define SK_DRIVER_SENDEVENT(pAC, IoC)	0
-#define SK_DRIVER_SELFTEST(pAC, IoC)	0
-/* For get mtu you must add an own function */
-#define SK_DRIVER_GET_MTU(pAc,IoC,i)	0
-#define SK_DRIVER_SET_MTU(pAc,IoC,i,v)	0
-#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v)	0
-
-/*
-** Interim definition of SK_DRV_TIMER placed in this file until 
-** common modules have been finalized
-*/
-#define SK_DRV_TIMER			11 
-#define	SK_DRV_MODERATION_TIMER		1
-#define SK_DRV_MODERATION_TIMER_LENGTH  1000000  /* 1 second */
-#define SK_DRV_RX_CLEANUP_TIMER		2
-#define SK_DRV_RX_CLEANUP_TIMER_LENGTH	1000000	 /* 100 millisecs */
-
-/*
-** Definitions regarding transmitting frames 
-** any calculating any checksum.
-*/
-#define C_LEN_ETHERMAC_HEADER_DEST_ADDR 6
-#define C_LEN_ETHERMAC_HEADER_SRC_ADDR  6
-#define C_LEN_ETHERMAC_HEADER_LENTYPE   2
-#define C_LEN_ETHERMAC_HEADER           ( (C_LEN_ETHERMAC_HEADER_DEST_ADDR) + \
-                                          (C_LEN_ETHERMAC_HEADER_SRC_ADDR)  + \
-                                          (C_LEN_ETHERMAC_HEADER_LENTYPE) )
-
-#define C_LEN_ETHERMTU_MINSIZE          46
-#define C_LEN_ETHERMTU_MAXSIZE_STD      1500
-#define C_LEN_ETHERMTU_MAXSIZE_JUMBO    9000
-
-#define C_LEN_ETHERNET_MINSIZE          ( (C_LEN_ETHERMAC_HEADER) + \
-                                          (C_LEN_ETHERMTU_MINSIZE) )
-
-#define C_OFFSET_IPHEADER               C_LEN_ETHERMAC_HEADER
-#define C_OFFSET_IPHEADER_IPPROTO       9
-#define C_OFFSET_TCPHEADER_TCPCS        16
-#define C_OFFSET_UDPHEADER_UDPCS        6
-
-#define C_OFFSET_IPPROTO                ( (C_LEN_ETHERMAC_HEADER) + \
-                                          (C_OFFSET_IPHEADER_IPPROTO) )
-
-#define C_PROTO_ID_UDP                  17       /* refer to RFC 790 or Stevens'   */
-#define C_PROTO_ID_TCP                  6        /* TCP/IP illustrated for details */
-
-/* TX and RX descriptors *****************************************************/
-
-typedef struct s_RxD RXD; /* the receive descriptor */
-
-struct s_RxD {
-	volatile SK_U32	RBControl;	/* Receive Buffer Control */
-	SK_U32		VNextRxd;	/* Next receive descriptor,low dword */
-	SK_U32		VDataLow;	/* Receive buffer Addr, low dword */
-	SK_U32		VDataHigh;	/* Receive buffer Addr, high dword */
-	SK_U32		FrameStat;	/* Receive Frame Status word */
-	SK_U32		TimeStamp;	/* Time stamp from XMAC */
-	SK_U32		TcpSums;	/* TCP Sum 2 / TCP Sum 1 */
-	SK_U32		TcpSumStarts;	/* TCP Sum Start 2 / TCP Sum Start 1 */
-	RXD		*pNextRxd;	/* Pointer to next Rxd */
-	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
-};
-
-typedef struct s_TxD TXD; /* the transmit descriptor */
-
-struct s_TxD {
-	volatile SK_U32	TBControl;	/* Transmit Buffer Control */
-	SK_U32		VNextTxd;	/* Next transmit descriptor,low dword */
-	SK_U32		VDataLow;	/* Transmit Buffer Addr, low dword */
-	SK_U32		VDataHigh;	/* Transmit Buffer Addr, high dword */
-	SK_U32		FrameStat;	/* Transmit Frame Status Word */
-	SK_U32		TcpSumOfs;	/* Reserved / TCP Sum Offset */
-	SK_U16		TcpSumSt;	/* TCP Sum Start */
-	SK_U16		TcpSumWr;	/* TCP Sum Write */
-	SK_U32		TcpReserved;	/* not used */
-	TXD		*pNextTxd;	/* Pointer to next Txd */
-	struct sk_buff	*pMBuf;		/* Pointer to Linux' socket buffer */
-};
-
-/* Used interrupt bits in the interrupts source register *********************/
-
-#define DRIVER_IRQS	((IS_IRQ_SW)   | \
-			(IS_R1_F)      |(IS_R2_F)  | \
-			(IS_XS1_F)     |(IS_XA1_F) | \
-			(IS_XS2_F)     |(IS_XA2_F))
-
-#define SPECIAL_IRQS	((IS_HW_ERR)   |(IS_I2C_READY)  | \
-			(IS_EXT_REG)   |(IS_TIMINT)     | \
-			(IS_PA_TO_RX1) |(IS_PA_TO_RX2)  | \
-			(IS_PA_TO_TX1) |(IS_PA_TO_TX2)  | \
-			(IS_MAC1)      |(IS_LNK_SYNC_M1)| \
-			(IS_MAC2)      |(IS_LNK_SYNC_M2)| \
-			(IS_R1_C)      |(IS_R2_C)       | \
-			(IS_XS1_C)     |(IS_XA1_C)      | \
-			(IS_XS2_C)     |(IS_XA2_C))
-
-#define IRQ_MASK	((IS_IRQ_SW)   | \
-			(IS_R1_B)      |(IS_R1_F)     |(IS_R2_B) |(IS_R2_F) | \
-			(IS_XS1_B)     |(IS_XS1_F)    |(IS_XA1_B)|(IS_XA1_F)| \
-			(IS_XS2_B)     |(IS_XS2_F)    |(IS_XA2_B)|(IS_XA2_F)| \
-			(IS_HW_ERR)    |(IS_I2C_READY)| \
-			(IS_EXT_REG)   |(IS_TIMINT)   | \
-			(IS_PA_TO_RX1) |(IS_PA_TO_RX2)| \
-			(IS_PA_TO_TX1) |(IS_PA_TO_TX2)| \
-			(IS_MAC1)      |(IS_MAC2)     | \
-			(IS_R1_C)      |(IS_R2_C)     | \
-			(IS_XS1_C)     |(IS_XA1_C)    | \
-			(IS_XS2_C)     |(IS_XA2_C))
-
-#define IRQ_HWE_MASK	(IS_ERR_MSK) /* enable all HW irqs */
-
-typedef struct s_DevNet DEV_NET;
-
-struct s_DevNet {
-	int             PortNr;
-	int             NetNr;
-	SK_AC   *pAC;
-};  
-
-typedef struct s_TxPort		TX_PORT;
-
-struct s_TxPort {
-	/* the transmit descriptor rings */
-	caddr_t		pTxDescrRing;	/* descriptor area memory */
-	SK_U64		VTxDescrRing;	/* descr. area bus virt. addr. */
-	TXD		*pTxdRingHead;	/* Head of Tx rings */
-	TXD		*pTxdRingTail;	/* Tail of Tx rings */
-	TXD		*pTxdRingPrev;	/* descriptor sent previously */
-	int		TxdRingFree;	/* # of free entrys */
-	spinlock_t	TxDesRingLock;	/* serialize descriptor accesses */
-	SK_IOC		HwAddr;		/* bmu registers address */
-	int		PortIndex;	/* index number of port (0 or 1) */
-};
-
-typedef struct s_RxPort		RX_PORT;
-
-struct s_RxPort {
-	/* the receive descriptor rings */
-	caddr_t		pRxDescrRing;	/* descriptor area memory */
-	SK_U64		VRxDescrRing;   /* descr. area bus virt. addr. */
-	RXD		*pRxdRingHead;	/* Head of Rx rings */
-	RXD		*pRxdRingTail;	/* Tail of Rx rings */
-	RXD		*pRxdRingPrev;	/* descriptor given to BMU previously */
-	int		RxdRingFree;	/* # of free entrys */
-	int		RxCsum;		/* use receive checksum hardware */
-	spinlock_t	RxDesRingLock;	/* serialize descriptor accesses */
-	int		RxFillLimit;	/* limit for buffers in ring */
-	SK_IOC		HwAddr;		/* bmu registers address */
-	int		PortIndex;	/* index number of port (0 or 1) */
-};
-
-/* Definitions needed for interrupt moderation *******************************/
-
-#define IRQ_EOF_AS_TX     ((IS_XA1_F)     | (IS_XA2_F))
-#define IRQ_EOF_SY_TX     ((IS_XS1_F)     | (IS_XS2_F))
-#define IRQ_MASK_TX_ONLY  ((IRQ_EOF_AS_TX)| (IRQ_EOF_SY_TX))
-#define IRQ_MASK_RX_ONLY  ((IS_R1_F)      | (IS_R2_F))
-#define IRQ_MASK_SP_ONLY  (SPECIAL_IRQS)
-#define IRQ_MASK_TX_RX    ((IRQ_MASK_TX_ONLY)| (IRQ_MASK_RX_ONLY))
-#define IRQ_MASK_SP_RX    ((SPECIAL_IRQS)    | (IRQ_MASK_RX_ONLY))
-#define IRQ_MASK_SP_TX    ((SPECIAL_IRQS)    | (IRQ_MASK_TX_ONLY))
-#define IRQ_MASK_RX_TX_SP ((SPECIAL_IRQS)    | (IRQ_MASK_TX_RX))
-
-#define C_INT_MOD_NONE                 1
-#define C_INT_MOD_STATIC               2
-#define C_INT_MOD_DYNAMIC              4
-
-#define C_CLK_FREQ_GENESIS      53215000 /* shorter: 53.125 MHz  */
-#define C_CLK_FREQ_YUKON        78215000 /* shorter: 78.125 MHz  */
-
-#define C_INTS_PER_SEC_DEFAULT      2000 
-#define C_INT_MOD_ENABLE_PERCENTAGE   50 /* if higher 50% enable */
-#define C_INT_MOD_DISABLE_PERCENTAGE  50 /* if lower 50% disable */
-#define C_INT_MOD_IPS_LOWER_RANGE     30
-#define C_INT_MOD_IPS_UPPER_RANGE     40000
-
-
-typedef struct s_DynIrqModInfo  DIM_INFO;
-struct s_DynIrqModInfo {
-	unsigned long   PrevTimeVal;
-	unsigned int    PrevSysLoad;
-	unsigned int    PrevUsedTime;
-	unsigned int    PrevTotalTime;
-	int             PrevUsedDescrRatio;
-	int             NbrProcessedDescr;
-        SK_U64          PrevPort0RxIntrCts;
-        SK_U64          PrevPort1RxIntrCts;
-        SK_U64          PrevPort0TxIntrCts;
-        SK_U64          PrevPort1TxIntrCts;
-	SK_BOOL         ModJustEnabled;     /* Moderation just enabled yes/no */
-
-	int             MaxModIntsPerSec;            /* Moderation Threshold */
-	int             MaxModIntsPerSecUpperLimit;  /* Upper limit for DIM  */
-	int             MaxModIntsPerSecLowerLimit;  /* Lower limit for DIM  */
-
-	long            MaskIrqModeration;   /* ModIrqType (eg. 'TxRx')      */
-	SK_BOOL         DisplayStats;        /* Stats yes/no                 */
-	SK_BOOL         AutoSizing;          /* Resize DIM-timer on/off      */
-	int             IntModTypeSelect;    /* EnableIntMod (eg. 'dynamic') */
-
-	SK_TIMER        ModTimer; /* just some timer */
-};
-
-typedef struct s_PerStrm	PER_STRM;
-
-#define SK_ALLOC_IRQ	0x00000001
-
-#ifdef SK_DIAG_SUPPORT
-#define	DIAG_ACTIVE		1
-#define	DIAG_NOTACTIVE		0
-#endif
-
-/****************************************************************************
- * Per board structure / Adapter Context structure:
- *	Allocated within attach(9e) and freed within detach(9e).
- *	Contains all 'per device' necessary handles, flags, locks etc.:
- */
-struct s_AC  {
-	SK_GEINIT	GIni;		/* GE init struct */
-	SK_PNMI		Pnmi;		/* PNMI data struct */
-	SK_VPD		vpd;		/* vpd data struct */
-	SK_QUEUE	Event;		/* Event queue */
-	SK_HWT		Hwt;		/* Hardware Timer control struct */
-	SK_TIMCTRL	Tim;		/* Software Timer control struct */
-	SK_I2C		I2c;		/* I2C relevant data structure */
-	SK_ADDR		Addr;		/* for Address module */
-	SK_CSUM		Csum;		/* for checksum module */
-	SK_RLMT		Rlmt;		/* for rlmt module */
-	spinlock_t	SlowPathLock;	/* Normal IRQ lock */
-	struct timer_list BlinkTimer;	/* for LED blinking */
-	int		LedsOn;
-	SK_PNMI_STRUCT_DATA PnmiStruct;	/* structure to get all Pnmi-Data */
-	int			RlmtMode;	/* link check mode to set */
-	int			RlmtNets;	/* Number of nets */
-	
-	SK_IOC		IoBase;		/* register set of adapter */
-	int		BoardLevel;	/* level of active hw init (0-2) */
-
-	SK_U32		AllocFlag;	/* flag allocation of resources */
-	struct pci_dev	*PciDev;	/* for access to pci config space */
-	struct SK_NET_DEVICE	*dev[2];	/* pointer to device struct */
-
-	int		RxBufSize;	/* length of receive buffers */
-        struct net_device_stats stats;	/* linux 'netstat -i' statistics */
-	int		Index;		/* internal board index number */
-
-	/* adapter RAM sizes for queues of active port */
-	int		RxQueueSize;	/* memory used for receive queue */
-	int		TxSQueueSize;	/* memory used for sync. tx queue */
-	int		TxAQueueSize;	/* memory used for async. tx queue */
-
-	int		PromiscCount;	/* promiscuous mode counter  */
-	int		AllMultiCount;  /* allmulticast mode counter */
-	int		MulticCount;	/* number of different MC    */
-					/*  addresses for this board */
-					/*  (may be more than HW can)*/
-
-	int		HWRevision;	/* Hardware revision */
-	int		ActivePort;	/* the active XMAC port */
-	int		MaxPorts;		/* number of activated ports */
-	int		TxDescrPerRing;	/* # of descriptors per tx ring */
-	int		RxDescrPerRing;	/* # of descriptors per rx ring */
-
-	caddr_t		pDescrMem;	/* Pointer to the descriptor area */
-	dma_addr_t	pDescrMemDMA;	/* PCI DMA address of area */
-
-	/* the port structures with descriptor rings */
-	TX_PORT		TxPort[SK_MAX_MACS][2];
-	RX_PORT		RxPort[SK_MAX_MACS];
-
-	SK_BOOL		CheckQueue;	/* check event queue soon */
-	SK_TIMER        DrvCleanupTimer;/* to check for pending descriptors */
-	DIM_INFO        DynIrqModInfo;  /* all data related to DIM */
-
-	/* Only for tests */
-	int		PortDown;
-	int		ChipsetType;	/*  Chipset family type 
-					 *  0 == Genesis family support
-					 *  1 == Yukon family support
-					 */
-#ifdef SK_DIAG_SUPPORT
-	SK_U32		DiagModeActive;		/* is diag active?	*/
-	SK_BOOL		DiagFlowCtrl;		/* for control purposes	*/
-	SK_PNMI_STRUCT_DATA PnmiBackup;		/* backup structure for all Pnmi-Data */
-	SK_BOOL         WasIfUp[SK_MAX_MACS];   /* for OpenClose while 
-						 * DIAG is busy with NIC 
-						 */
-#endif
-
-};
-
-
-#endif /* __INC_SKDRV2ND_H */
-

drivers/net/sk98lin/h/skerror.h

-/******************************************************************************
- *
- * Name:	skerror.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.7 $
- * Date:	$Date: 2003/05/13 17:25:13 $
- * Purpose:	SK specific Error log support
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _INC_SKERROR_H_
-#define _INC_SKERROR_H_
-
-/*
- * Define Error Classes
- */
-#define	SK_ERRCL_OTHER		(0)		/* Other error */
-#define	SK_ERRCL_CONFIG		(1L<<0)	/* Configuration error */
-#define	SK_ERRCL_INIT		(1L<<1)	/* Initialization error */
-#define	SK_ERRCL_NORES		(1L<<2)	/* Out of Resources error */
-#define	SK_ERRCL_SW			(1L<<3)	/* Internal Software error */
-#define	SK_ERRCL_HW			(1L<<4)	/* Hardware Failure */
-#define	SK_ERRCL_COMM		(1L<<5)	/* Communication error */
-
-
-/*
- * Define Error Code Bases
- */
-#define	SK_ERRBASE_RLMT		 100	/* Base Error number for RLMT */
-#define	SK_ERRBASE_HWINIT	 200	/* Base Error number for HWInit */
-#define	SK_ERRBASE_VPD		 300	/* Base Error number for VPD */
-#define	SK_ERRBASE_PNMI		 400	/* Base Error number for PNMI */
-#define	SK_ERRBASE_CSUM		 500	/* Base Error number for Checksum */
-#define	SK_ERRBASE_SIRQ		 600	/* Base Error number for Special IRQ */
-#define	SK_ERRBASE_I2C		 700	/* Base Error number for I2C module */
-#define	SK_ERRBASE_QUEUE	 800	/* Base Error number for Scheduler */
-#define	SK_ERRBASE_ADDR		 900	/* Base Error number for Address module */
-#define SK_ERRBASE_PECP		1000    /* Base Error number for PECP */
-#define	SK_ERRBASE_DRV		1100	/* Base Error number for Driver */
-
-#endif	/* _INC_SKERROR_H_ */

drivers/net/sk98lin/h/skgedrv.h

-/******************************************************************************
- *
- * Name:	skgedrv.h
- * Project:	Gigabit Ethernet Adapters, Common Modules
- * Version:	$Revision: 1.10 $
- * Date:	$Date: 2003/07/04 12:25:01 $
- * Purpose:	Interface with the driver
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef __INC_SKGEDRV_H_
-#define __INC_SKGEDRV_H_
-
-/* defines ********************************************************************/
-
-/*
- * Define the driver events.
- * Usually the events are defined by the destination module.
- * In case of the driver we put the definition of the events here.
- */
-#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */
-#define SK_DRV_NET_UP   		 2	/* The net is operational */
-#define SK_DRV_NET_DOWN			 3	/* The net is down */
-#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */
-#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */
-#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */
-#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */
-#define SK_DRV_PORT_FAIL		 8	/* One port fails */
-#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */
-#define SK_DRV_POWER_DOWN		10	/* Power down mode */
-#define SK_DRV_TIMER			11	/* Timer for free use */
-#ifdef SK_NO_RLMT
-#define SK_DRV_LINK_UP  		12	/* Link Up event for driver */
-#define SK_DRV_LINK_DOWN		13	/* Link Down event for driver */
-#endif
-#define SK_DRV_DOWNSHIFT_DET	14	/* Downshift 4-Pair / 2-Pair (YUKON only) */
-#endif /* __INC_SKGEDRV_H_ */

drivers/net/sk98lin/h/skgehwt.h

-/******************************************************************************
- *
- * Name:	skhwt.h
- * Project:	Gigabit Ethernet Adapters, Event Scheduler Module
- * Version:	$Revision: 1.7 $
- * Date:	$Date: 2003/09/16 12:55:08 $
- * Purpose:	Defines for the hardware timer functions
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEHWT.H	contains all defines and types for the timer functions
- */
-
-#ifndef	_SKGEHWT_H_
-#define _SKGEHWT_H_
-
-/*
- * SK Hardware Timer
- * - needed wherever the HWT module is used
- * - use in Adapters context name pAC->Hwt
- */
-typedef	struct s_Hwt {
-	SK_U32		TStart;	/* HWT start */
-	SK_U32		TStop;	/* HWT stop */
-	int		TActive;	/* HWT: flag : active/inactive */
-} SK_HWT;
-
-extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc);
-extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time);
-extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc);
-extern SK_U32 SkHwtRead(SK_AC *pAC, SK_IOC Ioc);
-extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc);
-#endif	/* _SKGEHWT_H_ */

drivers/net/sk98lin/h/skgei2c.h

-/******************************************************************************
- *
- * Name:	skgei2c.h
- * Project:	Gigabit Ethernet Adapters, TWSI-Module
- * Version:	$Revision: 1.25 $
- * Date:	$Date: 2003/10/20 09:06:05 $
- * Purpose:	Special defines for TWSI
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/*
- * SKGEI2C.H	contains all SK-98xx specific defines for the TWSI handling
- */
-
-#ifndef _INC_SKGEI2C_H_
-#define _INC_SKGEI2C_H_
-
-/*
- * Macros to access the B2_I2C_CTRL
- */
-#define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \
-	SK_OUT32(IoC, B2_I2C_CTRL,\
-		(flag ? 0x80000000UL : 0x0L) | \
-		(((SK_U32)reg << 16) & I2C_ADDR) | \
-		(((SK_U32)dev << 9) & I2C_DEV_SEL) | \
-		(dev_size & I2C_DEV_SIZE) | \
-		((burst << 4) & I2C_BURST_LEN))
-
-#define SK_I2C_STOP(IoC) {				\
-	SK_U32	I2cCtrl;				\
-	SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl);		\
-	SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP);	\
-}
-
-#define SK_I2C_GET_CTL(IoC, pI2cCtrl)	SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl)
-
-/*
- * Macros to access the TWSI SW Registers
- */
-#define SK_I2C_SET_BIT(IoC, SetBits) {			\
-	SK_U8	OrgBits;				\
-	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
-	SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits));	\
-}
-
-#define SK_I2C_CLR_BIT(IoC, ClrBits) {			\
-	SK_U8	OrgBits;				\
-	SK_IN8(IoC, B2_I2C_SW, &OrgBits);		\
-	SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits)));	\
-}
-
-#define SK_I2C_GET_SW(IoC, pI2cSw)	SK_IN8(IoC, B2_I2C_SW, pI2cSw)
-
-/*
- * define the possible sensor states
- */
-#define	SK_SEN_IDLE		0	/* Idle: sensor not read */
-#define	SK_SEN_VALUE	1	/* Value Read cycle */
-#define	SK_SEN_VALEXT	2	/* Extended Value Read cycle */
-
-/*
- * Conversion factor to convert read Voltage sensor to milli Volt
- * Conversion factor to convert read Temperature sensor to 10th degree Celsius
- */
-#define	SK_LM80_VT_LSB		22	/* 22mV LSB resolution */
-#define	SK_LM80_TEMP_LSB	10	/* 1 degree LSB resolution */
-#define	SK_LM80_TEMPEXT_LSB	 5	/* 0.5 degree LSB resolution for ext. val. */
-
-/*
- * formula: counter = (22500*60)/(rpm * divisor * pulses/2)
- * assuming: 6500rpm, 4 pulses, divisor 1
- */
-#define SK_LM80_FAN_FAKTOR	((22500L*60)/(1*2))
-
-/*
- * Define sensor management data
- * Maximum is reached on Genesis copper dual port and Yukon-64
- * Board specific maximum is in pAC->I2c.MaxSens
- */
-#define	SK_MAX_SENSORS	8	/* maximal no. of installed sensors */
-#define	SK_MIN_SENSORS	5	/* minimal no. of installed sensors */
-
-/*
- * To watch the state machine (SM) use the timer in two ways
- * instead of one as hitherto
- */
-#define	SK_TIMER_WATCH_SM		0	/* Watch the SM to finish in a spec. time */
-#define	SK_TIMER_NEW_GAUGING	1	/* Start a new gauging when timer expires */
-
-/*
- * Defines for the individual thresholds
- */
-
-/* Temperature sensor */
-#define	SK_SEN_TEMP_HIGH_ERR	800	/* Temperature High Err  Threshold */
-#define	SK_SEN_TEMP_HIGH_WARN	700	/* Temperature High Warn Threshold */
-#define	SK_SEN_TEMP_LOW_WARN	100	/* Temperature Low  Warn Threshold */
-#define	SK_SEN_TEMP_LOW_ERR		  0	/* Temperature Low  Err  Threshold */
-
-/* VCC which should be 5 V */
-#define	SK_SEN_PCI_5V_HIGH_ERR		5588	/* Voltage PCI High Err  Threshold */
-#define	SK_SEN_PCI_5V_HIGH_WARN		5346	/* Voltage PCI High Warn Threshold */
-#define	SK_SEN_PCI_5V_LOW_WARN		4664	/* Voltage PCI Low  Warn Threshold */
-#define	SK_SEN_PCI_5V_LOW_ERR		4422	/* Voltage PCI Low  Err  Threshold */
-
-/*
- * VIO may be 5 V or 3.3 V. Initialization takes two parts:
- * 1. Initialize lowest lower limit and highest higher limit.
- * 2. After the first value is read correct the upper or the lower limit to
- *    the appropriate C constant.
- *
- * Warning limits are +-5% of the exepected voltage.
- * Error limits are +-10% of the expected voltage.
- */
-
-/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */
-
-#define	SK_SEN_PCI_IO_5V_HIGH_ERR	5566	/* + 10% V PCI-IO High Err Threshold */
-#define	SK_SEN_PCI_IO_5V_HIGH_WARN	5324	/* +  5% V PCI-IO High Warn Threshold */
-					/*		5000	mVolt */
-#define	SK_SEN_PCI_IO_5V_LOW_WARN	4686	/* -  5% V PCI-IO Low Warn Threshold */
-#define	SK_SEN_PCI_IO_5V_LOW_ERR	4444	/* - 10% V PCI-IO Low Err Threshold */
-
-#define	SK_SEN_PCI_IO_RANGE_LIMITER	4000	/* 4000 mV range delimiter */
-
-/* correction values for the second pass */
-#define	SK_SEN_PCI_IO_3V3_HIGH_ERR	3850	/* + 15% V PCI-IO High Err Threshold */
-#define	SK_SEN_PCI_IO_3V3_HIGH_WARN	3674	/* + 10% V PCI-IO High Warn Threshold */
-					/*		3300	mVolt */
-#define	SK_SEN_PCI_IO_3V3_LOW_WARN	2926	/* - 10% V PCI-IO Low Warn Threshold */
-#define	SK_SEN_PCI_IO_3V3_LOW_ERR	2772	/* - 15% V PCI-IO Low Err  Threshold */
-
-/*
- * VDD voltage
- */
-#define	SK_SEN_VDD_HIGH_ERR		3630	/* Voltage ASIC High Err  Threshold */
-#define	SK_SEN_VDD_HIGH_WARN	3476	/* Voltage ASIC High Warn Threshold */
-#define	SK_SEN_VDD_LOW_WARN		3146	/* Voltage ASIC Low  Warn Threshold */
-#define	SK_SEN_VDD_LOW_ERR		2970	/* Voltage ASIC Low  Err  Threshold */
-
-/*
- * PHY PLL 3V3 voltage
- */
-#define	SK_SEN_PLL_3V3_HIGH_ERR		3630	/* Voltage PMA High Err  Threshold */
-#define	SK_SEN_PLL_3V3_HIGH_WARN	3476	/* Voltage PMA High Warn Threshold */
-#define	SK_SEN_PLL_3V3_LOW_WARN		3146	/* Voltage PMA Low  Warn Threshold */
-#define	SK_SEN_PLL_3V3_LOW_ERR		2970	/* Voltage PMA Low  Err  Threshold */
-
-/*
- * VAUX (YUKON only)
- */
-#define	SK_SEN_VAUX_3V3_HIGH_ERR	3630	/* Voltage VAUX High Err Threshold */
-#define	SK_SEN_VAUX_3V3_HIGH_WARN	3476	/* Voltage VAUX High Warn Threshold */
-#define	SK_SEN_VAUX_3V3_LOW_WARN	3146	/* Voltage VAUX Low Warn Threshold */
-#define	SK_SEN_VAUX_3V3_LOW_ERR		2970	/* Voltage VAUX Low Err Threshold */
-#define	SK_SEN_VAUX_0V_WARN_ERR		   0	/* if VAUX not present */
-#define	SK_SEN_VAUX_RANGE_LIMITER	1000	/* 1000 mV range delimiter */
-
-/*
- * PHY 2V5 voltage
- */
-#define	SK_SEN_PHY_2V5_HIGH_ERR		2750	/* Voltage PHY High Err Threshold */
-#define	SK_SEN_PHY_2V5_HIGH_WARN	2640	/* Voltage PHY High Warn Threshold */
-#define	SK_SEN_PHY_2V5_LOW_WARN		2376	/* Voltage PHY Low Warn Threshold */
-#define	SK_SEN_PHY_2V5_LOW_ERR		2222	/* Voltage PHY Low Err Threshold */
-
-/*
- * ASIC Core 1V5 voltage (YUKON only)
- */
-#define	SK_SEN_CORE_1V5_HIGH_ERR	1650	/* Voltage ASIC Core High Err Threshold */
-#define	SK_SEN_CORE_1V5_HIGH_WARN	1575	/* Voltage ASIC Core High Warn Threshold */
-#define	SK_SEN_CORE_1V5_LOW_WARN	1425	/* Voltage ASIC Core Low Warn Threshold */
-#define	SK_SEN_CORE_1V5_LOW_ERR 	1350	/* Voltage ASIC Core Low Err Threshold */
-
-/*
- * FAN 1 speed
- */
-/* assuming: 6500rpm +-15%, 4 pulses,
- * warning at:	80 %
- * error at:	70 %
- * no upper limit
- */
-#define	SK_SEN_FAN_HIGH_ERR		20000	/* FAN Speed High Err Threshold */
-#define	SK_SEN_FAN_HIGH_WARN	20000	/* FAN Speed High Warn Threshold */
-#define	SK_SEN_FAN_LOW_WARN		 5200	/* FAN Speed Low Warn Threshold */
-#define	SK_SEN_FAN_LOW_ERR		 4550	/* FAN Speed Low Err Threshold */
-
-/*
- * Some Voltages need dynamic thresholds
- */
-#define	SK_SEN_DYN_INIT_NONE		 0  /* No dynamic init of thresholds */
-#define	SK_SEN_DYN_INIT_PCI_IO		10  /* Init PCI-IO with new thresholds */
-#define	SK_SEN_DYN_INIT_VAUX		11  /* Init VAUX with new thresholds */
-
-extern	int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen);
-#endif	/* n_INC_SKGEI2C_H */

drivers/net/sk98lin/h/skgepnm2.h

-/*****************************************************************************
- *
- * Name:	skgepnm2.h
- * Project:	GEnesis, PCI Gigabit Ethernet Adapter
- * Version:	$Revision: 1.36 $
- * Date:	$Date: 2003/05/23 12:45:13 $
- * Purpose:	Defines for Private Network Management Interface
- *
- ****************************************************************************/
-
-/******************************************************************************
- *
- *	(C)Copyright 1998-2002 SysKonnect GmbH.
- *	(C)Copyright 2002-2003 Marvell.
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef _SKGEPNM2_H_
-#define _SKGEPNM2_H_
-
-/*
- * General definitions
- */
-#define SK_PNMI_CHIPSET_XMAC	1	/* XMAC11800FP */
-#define SK_PNMI_CHIPSET_YUKON	2	/* YUKON */
-
-#define	SK_PNMI_BUS_PCI		1	/* PCI bus*/
-
-/*
- * Actions
- */
-#define SK_PNMI_ACT_IDLE		1
-#define SK_PNMI_ACT_RESET		2
-#define SK_PNMI_ACT_SELFTEST	3
-#define SK_PNMI_ACT_RESETCNT	4
-
-/*
- * VPD releated defines
- */
-
-#define SK_PNMI_VPD_RW		1
-#define SK_PNMI_VPD_RO		2
-
-#define SK_PNMI_VPD_OK			0
-#define SK_PNMI_VPD_NOTFOUND	1
-#define SK_PNMI_VPD_CUT			2
-#define SK_PNMI_VPD_TIMEOUT		3
-#define SK_PNMI_VPD_FULL		4
-#define SK_PNMI_VPD_NOWRITE		5
-#define SK_PNMI_VPD_FATAL		6
-
-#define SK_PNMI_VPD_IGNORE	0
-#define SK_PNMI_VPD_CREATE	1
-#define SK_PNMI_VPD_DELETE	2
-
-
-/*
- * RLMT related defines
- */
-#define SK_PNMI_DEF_RLMT_CHG_THRES	240	/* 4 changes per minute */
-
-
-/*
- * VCT internal status values
- */
-#define SK_PNMI_VCT_PENDING	32
-#define SK_PNMI_VCT_TEST_DONE	64
-#define SK_PNMI_VCT_LINK	128
-
-/*
- * Internal table definitions
- */
-#define SK_PNMI_GET		0
-#define SK_PNMI_PRESET	1
-#define SK_PNMI_SET		2
-
-#define SK_PNMI_RO		0
-#define SK_PNMI_RW		1
-#define SK_PNMI_WO		2
-
-typedef struct s_OidTabEntry {
-	SK_U32			Id;
-	SK_U32			InstanceNo;
-	unsigned int	StructSize;
-	unsigned int	Offset;
-	int				Access;
-	int				(* Func)(SK_AC *pAc, SK_IOC pIo, int action,
-							 SK_U32 Id, char* pBuf, unsigned int* pLen,
-							 SK_U32 Instance, unsigned int TableIndex,
-							 SK_U32 NetNumber);
-	SK_U16			Param;
-} SK_PNMI_TAB_ENTRY;
-
-
-/*
- * Trap lengths
- */
-#define SK_PNMI_TRAP_SIMPLE_LEN			17
-#define SK_PNMI_TRAP_SENSOR_LEN_BASE	46
-#define SK_PNMI_TRAP_RLMT_CHANGE_LEN	23
-#define SK_PNMI_TRAP_RLMT_PORT_LEN		23
-
-/*
- * Number of MAC types supported
- */
-#define SK_PNMI_MAC_TYPES	(SK_MAC_GMAC + 1)
-
-/*
- * MAC statistic data list (overall set for MAC types used)
- */
-enum SK_MACSTATS {
-	SK_PNMI_HTX				= 0,
-	SK_PNMI_HTX_OCTET,
-	SK_PNMI_HTX_OCTETHIGH 	= SK_PNMI_HTX_OCTET,
-	SK_PNMI_HTX_OCTETLOW,
-	SK_PNMI_HTX_BROADCAST,
-	SK_PNMI_HTX_MULTICAST,
-	SK_PNMI_HTX_UNICAST,
-	SK_PNMI_HTX_BURST,
-	SK_PNMI_HTX_PMACC,
-	SK_PNMI_HTX_MACC,
-	SK_PNMI_HTX_COL,
-	SK_PNMI_HTX_SINGLE_COL,
-	SK_PNMI_HTX_MULTI_COL,
-	SK_PNMI_HTX_EXCESS_COL,
-	SK_PNMI_HTX_LATE_COL,
-	SK_PNMI_HTX_DEFFERAL,
-	SK_PNMI_HTX_EXCESS_DEF,
-	SK_PNMI_HTX_UNDERRUN,
-	SK_PNMI_HTX_CARRIER,
-	SK_PNMI_HTX_UTILUNDER,
-	SK_PNMI_HTX_UTILOVER,
-	SK_PNMI_HTX_64,
-	SK_PNMI_HTX_127,
-	SK_PNMI_HTX_255,
-	SK_PNMI_HTX_511,
-	SK_PNMI_HTX_1023,
-	SK_PNMI_HTX_MAX,
-	SK_PNMI_HTX_LONGFRAMES,
-	SK_PNMI_HTX_SYNC,
-	SK_PNMI_HTX_SYNC_OCTET,
-	SK_PNMI_HTX_RESERVED,
-	
-	SK_PNMI_HRX,
-	SK_PNMI_HRX_OCTET,
-	SK_PNMI_HRX_OCTETHIGH	= SK_PNMI_HRX_OCTET,
-	SK_PNMI_HRX_OCTETLOW,
-	SK_PNMI_HRX_BADOCTET,
-	SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET,
-	SK_PNMI_HRX_BADOCTETLOW,
-	SK_PNMI_HRX_BROADCAST,
-	SK_PNMI_HRX_MULTICAST,
-	SK_PNMI_HRX_UNICAST,
-	SK_PNMI_HRX_PMACC,
-	SK_PNMI_HRX_MACC,
-	SK_PNMI_HRX_PMACC_ERR,
-	SK_PNMI_HRX_MACC_UNKWN,
-	SK_PNMI_HRX_BURST,
-	SK_PNMI_HRX_MISSED,
-	SK_PNMI_HRX_FRAMING,
-	SK_PNMI_HRX_UNDERSIZE,
-	SK_PNMI_HRX_OVERFLOW,
-	SK_PNMI_HRX_JABBER,
-	SK_PNMI_HRX_CARRIER,
-	SK_PNMI_HRX_IRLENGTH,
-	SK_PNMI_HRX_SYMBOL,
-	SK_PNMI_HRX_SHORTS,
-	SK_PNMI_HRX_RUNT,
-	SK_PNMI_HRX_TOO_LONG,
-	SK_PNMI_HRX_FCS,
-	SK_PNMI_HRX_CEXT,
-	SK_PNMI_HRX_UTILUNDER,
-	SK_PNMI_HRX_UTILOVER,
-	SK_PNMI_HRX_64,
-	SK_PNMI_HRX_127,
-	SK_PNMI_HRX_255,
-	SK_PNMI_HRX_511,
-	SK_PNMI_HRX_1023,
-	SK_PNMI_HRX_MAX,
-	SK_PNMI_HRX_LONGFRAMES,
-	
-	SK_PNMI_HRX_RESERVED,
-	
-	SK_PNMI_MAX_IDX		/* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */
-};
-
-/*
- * MAC specific data
- */
-typedef struct s_PnmiStatAddr {
-	SK_U16		Reg;		/* MAC register containing the value */
-	SK_BOOL		GetOffset;	/* TRUE: Offset managed by PNMI (call GetStatVal())*/
-} SK_PNMI_STATADDR;
-
-
-/*
- * SK_PNMI_STRUCT_DATA copy offset evaluation macros
- */
-#define SK_PNMI_OFF(e)		((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
-#define SK_PNMI_MAI_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e))
-#define SK_PNMI_VPD_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e))
-#define SK_PNMI_SEN_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e))
-#define SK_PNMI_CHK_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e))
-#define SK_PNMI_STA_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e))
-#define SK_PNMI_CNF_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e))
-#define SK_PNMI_RLM_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e))
-#define SK_PNMI_MON_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e))
-#define SK_PNMI_TRP_OFF(e)	((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e))
-
-#define SK_PNMI_SET_STAT(b,s,o)	{SK_U32	Val32; char *pVal; \
-					Val32 = (s); \
-					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
-						&(((SK_PNMI_STRUCT_DATA *)0)-> \
-						ReturnStatus.ErrorStatus)); \
-					SK_PNMI_STORE_U32(pVal, Val32); \
-					Val32 = (o); \
-					pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \
-						&(((SK_PNMI_STRUCT_DATA *)0)-> \
-						ReturnStatus.ErrorOffset)); \
-					SK_PNMI_STORE_U32(pVal, Val32);}
-
-/*
- * Time macros
- */
-#ifndef SK_PNMI_HUNDREDS_SEC
-#if SK_TICKS_PER_SEC == 100
-#define SK_PNMI_HUNDREDS_SEC(t)	(t)
-#else
-#define SK_PNMI_HUNDREDS_SEC(t)	(((t) * 100) / (SK_TICKS_PER_SEC))
-#endif /* !SK_TICKS_PER_SEC */
-#endif /* !SK_PNMI_HUNDREDS_SEC */
-
-/*
- * Macros to work around alignment problems
- */
-#ifndef SK_PNMI_STORE_U16
-#define SK_PNMI_STORE_U16(p,v)	{*(char *)(p) = *((char *)&(v)); \
-					*((char *)(p) + 1) = \
-						*(((char *)&(v)) + 1);}
-#endif
-
-#ifndef SK_PNMI_STORE_U32
-#define SK_PNMI_STORE_U32(p,v)	{*(char *)(p) = *((char *)&(v)); \
-					*((char *)(p) + 1) = \
-						*(((char *)&(v)) + 1); \
-					*((char *)(p) + 2) = \
-						*(((char *)&(v)) + 2); \
-					*((char *)(p) + 3) = \
-						*(((char *)&(v)) + 3);}
-#endif
-
-#ifndef SK_PNMI_STORE_U64
-#define SK_PNMI_STORE_U64(p,v)	{*(char *)(p) = *((char *)&(v)); \
-					*((char *)(p) + 1) = \
-						*(((char *)&(v)) + 1); \
-					*((char *)(p) + 2) = \
-						*(((char *)&(v)) + 2); \
-					*((char *)(p) + 3) = \
-						*(((char *)&(v)) + 3); \
-					*((char *)(p) + 4) = \
-						*(((char *)&(v)) + 4); \
-					*((char *)(p) + 5) = \
-						*(((char *)&(v)) + 5); \
-					*((char *)(p) + 6) = \
-						*(((char *)&(v)) + 6); \
-					*((char *)(p) + 7) = \
-						*(((char *)&(v)) + 7);}
-#endif
-
-#ifndef SK_PNMI_READ_U16
-#define SK_PNMI_READ_U16(p,v)	{*((char *)&(v)) = *(char *)(p); \
-					*(((char *)&(v)) + 1) = \
-						*((char *)(p) + 1);}
-#endif
-
-#ifndef SK_PNMI_READ_U32
-#define SK_PNMI_READ_U32(p,v)	{*((char *)&(v)) = *(char *)(p); \
-					*(((char *)&(v)) + 1) = \
-						*((char *)(p) + 1); \
-					*(((char *)&(v)) + 2) = \
-						*((char *)(p) + 2); \
-					*(((char *)&(v)) + 3) = \
-						*((char *)(p) + 3);}
-#endif
-
-#ifndef SK_PNMI_READ_U64
-#define SK_PNMI_READ_U64(p,v)	{*((char *)&(v)) = *(char *)(p); \
-					*(((char *)&(v)) + 1) = \
-						*((char *)(p) + 1); \
-					*(((char *)&(v)) + 2) = \
-						*((char *)(p) + 2); \
-					*(((char *)&(v)) + 3) = \
-						*((char *)(p) + 3); \
-					*(((char *)&(v)) + 4) = \
-						*((char *)(p) + 4); \
-					*(((char *)&(v)) + 5) = \
-						*((char *)(p) + 5); \
-					*(((char *)&(v)) + 6) = \
-						*((char *)(p) + 6); \
-					*(((char *)&(v)) + 7) = \
-						*((char *)(p) + 7);}
-#endif
-
-/*
- * Macros for Debug
- */
-#ifdef DEBUG
-
-#define SK_PNMI_CHECKFLAGS(vSt)	{if (pAC->Pnmi.MacUpdatedFlag > 0 || \
-					pAC->Pnmi.RlmtUpdatedFlag > 0 || \
-					pAC->Pnmi.SirqUpdatedFlag > 0) { \
-						SK_DBG_MSG(pAC, \
-						SK_DBGMOD_PNMI, \
-						SK_DBGCAT_CTRL,	\
-						("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \
-						vSt, \
-						pAC->Pnmi.MacUpdatedFlag, \
-						pAC->Pnmi.RlmtUpdatedFlag, \
-						pAC->Pnmi.SirqUpdatedFlag))}}
-
-#else	/* !DEBUG */
-
-#define SK_PNMI_CHECKFLAGS(vSt)	/* Nothing */
-
-#endif	/* !DEBUG */
-
-#endif	/* _SKGEPNM2_H_ */