提交 e0e31afb 编写于 作者: B Bob Sharp 提交者: Roland Dreier

RDMA/nes: Enable MC/UC after changing MTU

Re-enable multicast and unicast after changing MTU.
Signed-off-by: NBob Sharp <bsharp@neteffect.com>
Signed-off-by: NSweta Bhatt <sweta.bhatt@einfochips.com>
Signed-off-by: NChien Tung <ctung@neteffect.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 7a8d1407
......@@ -918,6 +918,10 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu)
struct nes_device *nesdev = nesvnic->nesdev;
int ret = 0;
u8 jumbomode = 0;
u32 nic_active;
u32 nic_active_bit;
u32 uc_all_active;
u32 mc_all_active;
if ((new_mtu < ETH_ZLEN) || (new_mtu > max_mtu))
return -EINVAL;
......@@ -931,8 +935,24 @@ static int nes_netdev_change_mtu(struct net_device *netdev, int new_mtu)
nes_nic_init_timer_defaults(nesdev, jumbomode);
if (netif_running(netdev)) {
nic_active_bit = 1 << nesvnic->nic_index;
mc_all_active = nes_read_indexed(nesdev,
NES_IDX_NIC_MULTICAST_ALL) & nic_active_bit;
uc_all_active = nes_read_indexed(nesdev,
NES_IDX_NIC_UNICAST_ALL) & nic_active_bit;
nes_netdev_stop(netdev);
nes_netdev_open(netdev);
nic_active = nes_read_indexed(nesdev,
NES_IDX_NIC_MULTICAST_ALL);
nic_active |= mc_all_active;
nes_write_indexed(nesdev, NES_IDX_NIC_MULTICAST_ALL,
nic_active);
nic_active = nes_read_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL);
nic_active |= uc_all_active;
nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active);
}
return ret;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册