提交 e0c28116 编写于 作者: S Stephen Hemminger 提交者: Jeff Garzik

sky2: be more selective about FIFO watchdog

Be more selective about when to enable the ram buffer watchdog code.
It is unnecessary on XL A3 or later revs, and with Yukon FE
the buffer is so small (4K) that the watchdog detects false positives.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 6d3105d5
......@@ -826,7 +826,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
if (!(hw->flags & SKY2_HW_RAMBUFFER)) {
/* On chips without ram buffer, pause is controled by MAC level */
if (sky2_read8(hw, B2_E_0) == 0) {
sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
......@@ -1281,7 +1282,7 @@ static int sky2_up(struct net_device *dev)
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
unsigned port = sky2->port;
u32 imask;
u32 imask, ramsize;
int cap, err = -ENOMEM;
struct net_device *otherdev = hw->dev[sky2->port^1];
......@@ -1336,13 +1337,12 @@ static int sky2_up(struct net_device *dev)
sky2_mac_init(hw, port);
if (hw->flags & SKY2_HW_RAMBUFFER) {
/* Register is number of 4K blocks on internal RAM buffer. */
u32 ramsize = sky2_read8(hw, B2_E_0) * 4;
/* Register is number of 4K blocks on internal RAM buffer. */
ramsize = sky2_read8(hw, B2_E_0) * 4;
if (ramsize > 0) {
u32 rxspace;
printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize);
pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
else
......@@ -2005,7 +2005,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu)
synchronize_irq(hw->pdev->irq);
if (!(hw->flags & SKY2_HW_RAMBUFFER))
if (sky2_read8(hw, B2_E_0) == 0)
sky2_set_tx_stfwd(hw, port);
ctl = gma_read16(hw, port, GM_GP_CTRL);
......@@ -2536,7 +2536,7 @@ static void sky2_watchdog(unsigned long arg)
++active;
/* For chips with Rx FIFO, check if stuck */
if ((hw->flags & SKY2_HW_RAMBUFFER) &&
if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) &&
sky2_rx_hung(dev)) {
pr_info(PFX "%s: receiver hang detected\n",
dev->name);
......@@ -2694,8 +2694,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
switch(hw->chip_id) {
case CHIP_ID_YUKON_XL:
hw->flags = SKY2_HW_GIGABIT
| SKY2_HW_NEWER_PHY
| SKY2_HW_RAMBUFFER;
| SKY2_HW_NEWER_PHY;
if (hw->chip_rev < 3)
hw->flags |= SKY2_HW_FIFO_HANG_CHECK;
break;
case CHIP_ID_YUKON_EC_U:
......@@ -2721,11 +2723,10 @@ static int __devinit sky2_init(struct sky2_hw *hw)
dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
return -EOPNOTSUPP;
}
hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER;
hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK;
break;
case CHIP_ID_YUKON_FE:
hw->flags = SKY2_HW_RAMBUFFER;
break;
case CHIP_ID_YUKON_FE_P:
......
......@@ -2063,7 +2063,7 @@ struct sky2_hw {
#define SKY2_HW_FIBRE_PHY 0x00000002
#define SKY2_HW_GIGABIT 0x00000004
#define SKY2_HW_NEWER_PHY 0x00000008
#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */
#define SKY2_HW_FIFO_HANG_CHECK 0x00000010
#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */
#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册