提交 e0423236 编写于 作者: Z Zhang Wei 提交者: Paul Mackerras

[RAPIDIO] Auto-probe the RapidIO system size

The RapidIO system size will auto probe in RIO setup.  The route table
and rionet_active in rionet.c are changed to be allocated dynamically
according to the size of the system.
Signed-off-by: NZhang Wei <wei.zhang@freescale.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 cc2bb696
......@@ -1007,6 +1007,12 @@ int fsl_rio_setup(struct of_device *dev)
rio_register_mport(port);
priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1);
port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR))
& RIO_PEF_CTLS) >> 4;
dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n",
port->sys_size ? 65536 : 256);
priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win
+ RIO_ATMU_REGS_OFFSET);
priv->maint_atmu_regs = priv->atmu_regs + 1;
......
......@@ -77,7 +77,7 @@ static int rionet_capable = 1;
* could be made into a hash table to save memory depending
* on system trade-offs.
*/
static struct rio_dev *rionet_active[RIO_MAX_ROUTE_ENTRIES];
static struct rio_dev **rionet_active;
#define is_rionet_capable(pef, src_ops, dst_ops) \
((pef & RIO_PEF_INB_MBOX) && \
......@@ -195,7 +195,8 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
}
if (eth->h_dest[0] & 0x01) {
for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++)
for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rnet->mport->sys_size);
i++)
if (rionet_active[i])
rionet_queue_tx_msg(skb, ndev,
rionet_active[i]);
......@@ -385,6 +386,8 @@ static void rionet_remove(struct rio_dev *rdev)
struct net_device *ndev = NULL;
struct rionet_peer *peer, *tmp;
free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ?
__ilog2(sizeof(void *)) + 4 : 0);
unregister_netdev(ndev);
kfree(ndev);
......@@ -443,6 +446,15 @@ static int rionet_setup_netdev(struct rio_mport *mport)
goto out;
}
rionet_active = (struct rio_dev **)__get_free_pages(GFP_KERNEL,
mport->sys_size ? __ilog2(sizeof(void *)) + 4 : 0);
if (!rionet_active) {
rc = -ENOMEM;
goto out;
}
memset((void *)rionet_active, 0, sizeof(void *) *
RIO_MAX_ROUTE_ENTRIES(mport->sys_size));
/* Set up private area */
rnet = (struct rionet_private *)ndev->priv;
rnet->mport = mport;
......
#
# RapidIO configuration
#
config RAPIDIO_8_BIT_TRANSPORT
bool "8-bit transport addressing"
depends on RAPIDIO
---help---
By default, the kernel assumes a 16-bit addressed RapidIO
network. By selecting this option, the kernel will support
an 8-bit addressed network.
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
......
......@@ -73,7 +73,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
rio_mport_read_config_32(port, destid, hopcount, RIO_DID_CSR, &result);
return RIO_GET_DID(result);
return RIO_GET_DID(port->sys_size, result);
}
/**
......@@ -88,7 +88,7 @@ static u16 rio_get_device_id(struct rio_mport *port, u16 destid, u8 hopcount)
static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u16 did)
{
rio_mport_write_config_32(port, destid, hopcount, RIO_DID_CSR,
RIO_SET_DID(did));
RIO_SET_DID(port->sys_size, did));
}
/**
......@@ -100,7 +100,8 @@ static void rio_set_device_id(struct rio_mport *port, u16 destid, u8 hopcount, u
*/
static void rio_local_set_device_id(struct rio_mport *port, u16 did)
{
rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(did));
rio_local_write_config_32(port, RIO_DID_CSR, RIO_SET_DID(port->sys_size,
did));
}
/**
......@@ -350,8 +351,18 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
rswitch->switchid = next_switchid;
rswitch->hopcount = hopcount;
rswitch->destid = destid;
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
if (!rswitch->route_table) {
kfree(rdev);
rdev = NULL;
kfree(rswitch);
goto out;
}
/* Initialize switch route table */
for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES; rdid++)
for (rdid = 0; rdid < RIO_MAX_ROUTE_ENTRIES(port->sys_size);
rdid++)
rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
rdev->rswitch = rswitch;
sprintf(rio_name(rdev), "%02x:s:%04x", rdev->net->id,
......@@ -480,7 +491,7 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
{
u32 result;
rio_mport_read_config_32(port, RIO_ANY_DESTID, hopcount,
rio_mport_read_config_32(port, RIO_ANY_DESTID(port->sys_size), hopcount,
RIO_HOST_DID_LOCK_CSR, &result);
return (u16) (result & 0xffff);
......@@ -571,14 +582,16 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
/* Attempt to acquire device lock */
rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
hopcount,
RIO_HOST_DID_LOCK_CSR, port->host_deviceid);
while ((tmp = rio_get_host_deviceid_lock(port, hopcount))
< port->host_deviceid) {
/* Delay a bit */
mdelay(1);
/* Attempt to acquire device lock again */
rio_mport_write_config_32(port, RIO_ANY_DESTID, hopcount,
rio_mport_write_config_32(port, RIO_ANY_DESTID(port->sys_size),
hopcount,
RIO_HOST_DID_LOCK_CSR,
port->host_deviceid);
}
......@@ -590,7 +603,9 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
/* Setup new RIO device */
if ((rdev = rio_setup_device(net, port, RIO_ANY_DESTID, hopcount, 1))) {
rdev = rio_setup_device(net, port, RIO_ANY_DESTID(port->sys_size),
hopcount, 1);
if (rdev) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
} else
......@@ -598,7 +613,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
if (rio_is_switch(rdev)) {
next_switchid++;
sw_inport = rio_get_swpinfo_inport(port, RIO_ANY_DESTID, hopcount);
sw_inport = rio_get_swpinfo_inport(port,
RIO_ANY_DESTID(port->sys_size), hopcount);
rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
port->host_deviceid, sw_inport);
rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
......@@ -612,7 +628,8 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
}
num_ports =
rio_get_swpinfo_tports(port, RIO_ANY_DESTID, hopcount);
rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
hopcount);
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
rio_name(rdev), rdev->vid, rdev->did, num_ports);
......@@ -624,13 +641,15 @@ static int rio_enum_peer(struct rio_net *net, struct rio_mport *port,
cur_destid = next_destid;
if (rio_sport_is_active
(port, RIO_ANY_DESTID, hopcount, port_num)) {
(port, RIO_ANY_DESTID(port->sys_size), hopcount,
port_num)) {
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
rio_route_add_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
RIO_ANY_DESTID, port_num);
RIO_GLOBAL_TABLE,
RIO_ANY_DESTID(port->sys_size),
port_num);
if (rio_enum_peer(net, port, hopcount + 1) < 0)
return -1;
......@@ -735,7 +754,8 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
pr_debug(
"RIO: scanning device on port %d\n",
port_num);
for (ndestid = 0; ndestid < RIO_ANY_DESTID;
for (ndestid = 0;
ndestid < RIO_ANY_DESTID(port->sys_size);
ndestid++) {
rio_route_get_entry(port, rdev->rswitch,
RIO_GLOBAL_TABLE,
......@@ -917,7 +937,9 @@ static void rio_build_route_tables(void)
list_for_each_entry(rdev, &rio_devices, global_list)
if (rio_is_switch(rdev))
for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
for (i = 0;
i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
i++) {
if (rio_route_get_entry
(rdev->net->hport, rdev->rswitch, RIO_GLOBAL_TABLE,
i, &sport) < 0)
......@@ -981,7 +1003,8 @@ int rio_disc_mport(struct rio_mport *mport)
del_timer_sync(&rio_enum_timer);
pr_debug("done\n");
if (rio_disc_peer(net, mport, RIO_ANY_DESTID, 0) < 0) {
if (rio_disc_peer(net, mport, RIO_ANY_DESTID(mport->sys_size),
0) < 0) {
printk(KERN_INFO
"RIO: master port %d device has failed discovery\n",
mport->id);
......
......@@ -43,7 +43,8 @@ static ssize_t routes_show(struct device *dev, struct device_attribute *attr, ch
if (!rdev->rswitch)
goto out;
for (i = 0; i < RIO_MAX_ROUTE_ENTRIES; i++) {
for (i = 0; i < RIO_MAX_ROUTE_ENTRIES(rdev->net->hport->sys_size);
i++) {
if (rdev->rswitch->route_table[i] == RIO_INVALID_ROUTE)
continue;
str +=
......
......@@ -43,7 +43,7 @@ u16 rio_local_get_device_id(struct rio_mport *port)
rio_local_read_config_32(port, RIO_DID_CSR, &result);
return (RIO_GET_DID(result));
return (RIO_GET_DID(port->sys_size, result));
}
/**
......
......@@ -51,10 +51,5 @@ extern struct rio_route_ops __end_rio_route_ops[];
DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \
vid, did, add_hook, get_hook)
#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
#define RIO_GET_DID(x) ((x & 0x00ff0000) >> 16)
#define RIO_SET_DID(x) ((x & 0x000000ff) << 16)
#else
#define RIO_GET_DID(x) (x & 0xffff)
#define RIO_SET_DID(x) (x & 0xffff)
#endif
#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
......@@ -23,7 +23,6 @@
#include <linux/device.h>
#include <linux/rio_regs.h>
#define RIO_ANY_DESTID 0xff
#define RIO_NO_HOPCOUNT -1
#define RIO_INVALID_DESTID 0xffff
......@@ -39,11 +38,8 @@
entry is invalid (no route
exists for the device ID) */
#ifdef CONFIG_RAPIDIO_8_BIT_TRANSPORT
#define RIO_MAX_ROUTE_ENTRIES (1 << 8)
#else
#define RIO_MAX_ROUTE_ENTRIES (1 << 16)
#endif
#define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8))
#define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff)
#define RIO_MAX_MBOX 4
#define RIO_MAX_MSG_SIZE 0x1000
......@@ -178,6 +174,10 @@ struct rio_mport {
unsigned char id; /* port ID, unique among all ports */
unsigned char index; /* port index, unique among all port
interfaces of the same type */
unsigned int sys_size; /* RapidIO common transport system size.
* 0 - Small size. 256 devices.
* 1 - Large size, 65536 devices.
*/
unsigned char name[40];
void *priv; /* Master port private data */
};
......@@ -213,7 +213,7 @@ struct rio_switch {
u16 switchid;
u16 hopcount;
u16 destid;
u8 route_table[RIO_MAX_ROUTE_ENTRIES];
u8 *route_table;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册