[SCSI] qla2xxx: T10 DIF - Fix incorrect error reporting.

This fix:
    - Disables app tag peeking; correct tag check will be added when the
      SCSI API is available.
    - Always derive ref_tag from scsi_get_lba()
    - Removes incorrect swap of FCP_LUN in FCP_CMND
    - Moves app-tag error check before ref-tag check. The reason being,
      currently there is no interface in SCSI to retrieve the app-tag
      for protection I/Os, so driver puts zero for app-tag in the
      firmware interface, but requests not to validate it, but when a
      ref-tag error is detected by firmware, it would put
      expected/actual tags for all the protection tags (guard/app/ref).
      As driver checks for app tag error first, a ref-tag error is
      incorrectly flagged as app-tag error.
    - Convert HBA specific checks to capability based.
Signed-off-by: NArun Easi <arun.easi@qlogic.com>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -1786,7 +1786,7 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 			fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
 	}
 
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
 			int prot = 0;
 			vha->flags.difdix_supported = 1;

drivers/scsi/qla2xxx/qla_dbg.c

@@ -8,24 +8,24 @@
 /*
  * Table for showing the current message id in use for particular level
  * Change this table for addition of log/debug messages.
- * -----------------------------------------------------
- * |             Level            |   Last Value Used  |
- * -----------------------------------------------------
- * | Module Init and Probe        |       0x0116       |
- * | Mailbox commands             |       0x111e       |
- * | Device Discovery             |       0x2083       |
- * | Queue Command and IO tracing |       0x302e       |
- * | DPC Thread                   |       0x401c       |
- * | Async Events                 |       0x5059       |
- * | Timer Routines               |       0x600d       |
- * | User Space Interactions      |       0x709c       |
- * | Task Management              |       0x8043       |
- * | AER/EEH                      |       0x900f       |
- * | Virtual Port                 |       0xa007       |
- * | ISP82XX Specific             |       0xb027       |
- * | MultiQ                       |       0xc00b       |
- * | Misc                         |       0xd00b       |
- * -----------------------------------------------------
+ * ----------------------------------------------------------------------
+ * |             Level            |   Last Value Used  |     Holes	|
+ * ----------------------------------------------------------------------
+ * | Module Init and Probe        |       0x0116       |  		|
+ * | Mailbox commands             |       0x1126       |		|
+ * | Device Discovery             |       0x2083       |		|
+ * | Queue Command and IO tracing |       0x302e       |     0x3008     |
+ * | DPC Thread                   |       0x401c       |		|
+ * | Async Events                 |       0x5059       |		|
+ * | Timer Routines               |       0x600d       |		|
+ * | User Space Interactions      |       0x709d       |		|
+ * | Task Management              |       0x8041       |    		|
+ * | AER/EEH                      |       0x900f       |		|
+ * | Virtual Port                 |       0xa007       |		|
+ * | ISP82XX Specific             |       0xb04f       |    		|
+ * | MultiQ                       |       0xc00b       |		|
+ * | Misc                         |       0xd00b       |		|
+ * ----------------------------------------------------------------------
  */
 
 #include "qla_def.h"

drivers/scsi/qla2xxx/qla_def.h

@@ -2529,6 +2529,7 @@ struct qla_hw_data {
 #define DT_ISP8021			BIT_14
 #define DT_ISP_LAST			(DT_ISP8021 << 1)
 
+#define DT_T10_PI                       BIT_25
 #define DT_IIDMA                        BIT_26
 #define DT_FWI2                         BIT_27
 #define DT_ZIO_SUPPORTED                BIT_28
@@ -2572,6 +2573,7 @@ struct qla_hw_data {
 #define IS_NOCACHE_VPD_TYPE(ha)	(IS_QLA81XX(ha))
 #define IS_ALOGIO_CAPABLE(ha)	(IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
 
+#define IS_T10_PI_CAPABLE(ha)   ((ha)->device_type & DT_T10_PI)
 #define IS_IIDMA_CAPABLE(ha)    ((ha)->device_type & DT_IIDMA)
 #define IS_FWI2_CAPABLE(ha)     ((ha)->device_type & DT_FWI2)
 #define IS_ZIO_SUPPORTED(ha)    ((ha)->device_type & DT_ZIO_SUPPORTED)

drivers/scsi/qla2xxx/qla_inline.h

@@ -104,9 +104,17 @@ qla2x00_set_fcport_state(fc_port_t *fcport, int state)
 }
 
 static inline int
-qla2x00_hba_err_chk_enabled(unsigned char op)
+qla2x00_hba_err_chk_enabled(srb_t *sp)
 {
-	switch (op) {
+	/*
+	 * Uncomment when corresponding SCSI changes are done.
+	 *
+	if (!sp->cmd->prot_chk)
+		return 0;
+	 *
+	 */
+
+	switch (scsi_get_prot_op(sp->cmd)) {
 	case SCSI_PROT_READ_STRIP:
 	case SCSI_PROT_WRITE_INSERT:
 		if (ql2xenablehba_err_chk >= 1)

drivers/scsi/qla2xxx/qla_iocb.c

@@ -709,12 +709,11 @@ struct fw_dif_context {
  *
  */
 static inline void
-qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
+qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
     unsigned int protcnt)
 {
-	struct sd_dif_tuple *spt;
+	struct scsi_cmnd *cmd = sp->cmd;
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	unsigned char op = scsi_get_prot_op(cmd);
 
 	switch (scsi_get_prot_type(cmd)) {
 	case SCSI_PROT_DIF_TYPE0:
@@ -724,6 +723,10 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
 		 */
 		pkt->ref_tag = cpu_to_le32((uint32_t)
 		    (0xffffffff & scsi_get_lba(cmd)));
+
+		if (!qla2x00_hba_err_chk_enabled(sp))
+			break;
+
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
 		pkt->ref_tag_mask[2] = 0xff;
@@ -735,20 +738,16 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
 	 * match LBA in CDB + N
 	 */
 	case SCSI_PROT_DIF_TYPE2:
-		if (!qla2x00_hba_err_chk_enabled(op))
-			break;
-
-		if (scsi_prot_sg_count(cmd)) {
-			spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
-			    scsi_prot_sglist(cmd)[0].offset;
-			pkt->app_tag = swab32(spt->app_tag);
-			pkt->app_tag_mask[0] =  0xff;
-			pkt->app_tag_mask[1] =  0xff;
-		}
+		pkt->app_tag = __constant_cpu_to_le16(0);
+		pkt->app_tag_mask[0] = 0x0;
+		pkt->app_tag_mask[1] = 0x0;
 
 		pkt->ref_tag = cpu_to_le32((uint32_t)
 		    (0xffffffff & scsi_get_lba(cmd)));
 
+		if (!qla2x00_hba_err_chk_enabled(sp))
+			break;
+
 		/* enable ALL bytes of the ref tag */
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
@@ -768,26 +767,15 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
 	 * 16 bit app tag.
 	 */
 	case SCSI_PROT_DIF_TYPE1:
-		if (!qla2x00_hba_err_chk_enabled(op))
+		pkt->ref_tag = cpu_to_le32((uint32_t)
+		    (0xffffffff & scsi_get_lba(cmd)));
+		pkt->app_tag = __constant_cpu_to_le16(0);
+		pkt->app_tag_mask[0] = 0x0;
+		pkt->app_tag_mask[1] = 0x0;
+
+		if (!qla2x00_hba_err_chk_enabled(sp))
 			break;
 
-		if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
-		    op == SCSI_PROT_WRITE_PASS)) {
-			spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
-			    scsi_prot_sglist(cmd)[0].offset;
-			ql_dbg(ql_dbg_io, vha, 0x3008,
-			    "LBA from user %p, lba = 0x%x for cmd=%p.\n",
-			    spt, (int)spt->ref_tag, cmd);
-			pkt->ref_tag = swab32(spt->ref_tag);
-			pkt->app_tag_mask[0] = 0x0;
-			pkt->app_tag_mask[1] = 0x0;
-		} else {
-			pkt->ref_tag = cpu_to_le32((uint32_t)
-			    (0xffffffff & scsi_get_lba(cmd)));
-			pkt->app_tag = __constant_cpu_to_le16(0);
-			pkt->app_tag_mask[0] = 0x0;
-			pkt->app_tag_mask[1] = 0x0;
-		}
 		/* enable ALL bytes of the ref tag */
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
@@ -1208,7 +1196,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 
 	INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
 
-	qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *)
+	qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
 	    &crc_ctx_pkt->ref_tag, tot_prot_dsds);
 
 	cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
@@ -1237,7 +1225,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 		fcp_cmnd->additional_cdb_len |= 2;
 
 	int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
-	host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
 	memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 	cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
 	cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
@@ -1289,7 +1276,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 	    BUG();
 	}
 
-	if (!qla2x00_hba_err_chk_enabled(scsi_get_prot_op(cmd)))
+	if (!qla2x00_hba_err_chk_enabled(sp))
 		fw_prot_opts |= 0x10; /* Disable Guard tag checking */
 
 	if (!bundling) {

drivers/scsi/qla2xxx/qla_isr.c

@@ -1534,25 +1534,26 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
 		return 1;
 	}
 
-	/* check appl tag */
-	if (e_app_tag != a_app_tag) {
+	/* check ref tag */
+	if (e_ref_tag != a_ref_tag) {
 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
-		    0x10, 0x2);
+		    0x10, 0x3);
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
 		return 1;
 	}
 
-	/* check ref tag */
-	if (e_ref_tag != a_ref_tag) {
+	/* check appl tag */
+	if (e_app_tag != a_app_tag) {
 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
-		    0x10, 0x3);
+		    0x10, 0x2);
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
 		return 1;
 	}
+
 	return 1;
 }
 

drivers/scsi/qla2xxx/qla_mid.c

@@ -472,7 +472,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport)
 	host->can_queue = base_vha->req->length + 128;
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
 		host->max_cmd_len = 32;
 	else
 		host->max_cmd_len = MAX_CMDSZ;

drivers/scsi/qla2xxx/qla_os.c

@@ -2255,7 +2255,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
 	host->unique_id = host->host_no;
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
 		host->max_cmd_len = 32;
 	else
 		host->max_cmd_len = MAX_CMDSZ;
@@ -2382,7 +2382,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    "Detected hba at address=%p.\n",
 	    ha);
 
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
 			int prot = 0;
 			base_vha->flags.difdix_supported = 1;