dmaengine: pl08x: Use the BIT() macro consistently

This makes the driver shift bits with BIT() which is used on other
places in the driver.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

drivers/dma/amba-pl08x.c

@@ -420,7 +420,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
 
 	/* Enable the DMA channel */
 	/* Do not access config register until channel shows as disabled */
-	while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+	while (readl(pl08x->base + PL080_EN_CHAN) & BIT(phychan->id))
 		cpu_relax();
 
 	/* Do not access config register until channel shows as inactive */
@@ -487,8 +487,8 @@ static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
 
 	writel(val, ch->reg_config);
 
-	writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
-	writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
+	writel(BIT(ch->id), pl08x->base + PL080_ERR_CLEAR);
+	writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR);
 }
 
 static inline u32 get_bytes_in_cctl(u32 cctl)
@@ -1837,7 +1837,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 		return IRQ_NONE;
 
 	for (i = 0; i < pl08x->vd->channels; i++) {
-		if (((1 << i) & err) || ((1 << i) & tc)) {
+		if ((BIT(i) & err) || (BIT(i) & tc)) {
 			/* Locate physical channel */
 			struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
 			struct pl08x_dma_chan *plchan = phychan->serving;
@@ -1875,7 +1875,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 			}
 			spin_unlock(&plchan->vc.lock);
 
-			mask |= (1 << i);
+			mask |= BIT(i);
 		}
 	}
 

include/linux/amba/pl080.h

@@ -38,9 +38,9 @@
 #define PL080_SOFT_LSREQ			(0x2C)
 
 #define PL080_CONFIG				(0x30)
-#define PL080_CONFIG_M2_BE			(1 << 2)
-#define PL080_CONFIG_M1_BE			(1 << 1)
-#define PL080_CONFIG_ENABLE			(1 << 0)
+#define PL080_CONFIG_M2_BE			BIT(2)
+#define PL080_CONFIG_M1_BE			BIT(1)
+#define PL080_CONFIG_ENABLE			BIT(0)
 
 #define PL080_SYNC				(0x34)
 
@@ -58,18 +58,18 @@
 
 #define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
 #define PL080_LLI_ADDR_SHIFT			(2)
-#define PL080_LLI_LM_AHB2			(1 << 0)
+#define PL080_LLI_LM_AHB2			BIT(0)
 
-#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_TC_IRQ_EN			BIT(31)
 #define PL080_CONTROL_PROT_MASK			(0x7 << 28)
 #define PL080_CONTROL_PROT_SHIFT		(28)
-#define PL080_CONTROL_PROT_CACHE		(1 << 30)
-#define PL080_CONTROL_PROT_BUFF			(1 << 29)
-#define PL080_CONTROL_PROT_SYS			(1 << 28)
-#define PL080_CONTROL_DST_INCR			(1 << 27)
-#define PL080_CONTROL_SRC_INCR			(1 << 26)
-#define PL080_CONTROL_DST_AHB2			(1 << 25)
-#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_PROT_CACHE		BIT(30)
+#define PL080_CONTROL_PROT_BUFF			BIT(29)
+#define PL080_CONTROL_PROT_SYS			BIT(28)
+#define PL080_CONTROL_DST_INCR			BIT(27)
+#define PL080_CONTROL_SRC_INCR			BIT(26)
+#define PL080_CONTROL_DST_AHB2			BIT(25)
+#define PL080_CONTROL_SRC_AHB2			BIT(24)
 #define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
 #define PL080_CONTROL_DWIDTH_SHIFT		(21)
 #define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
@@ -95,20 +95,20 @@
 #define PL080_WIDTH_16BIT			(0x1)
 #define PL080_WIDTH_32BIT			(0x2)
 
-#define PL080N_CONFIG_ITPROT			(1 << 20)
-#define PL080N_CONFIG_SECPROT			(1 << 19)
-#define PL080_CONFIG_HALT			(1 << 18)
-#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
-#define PL080_CONFIG_LOCK			(1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080N_CONFIG_ITPROT			BIT(20)
+#define PL080N_CONFIG_SECPROT			BIT(19)
+#define PL080_CONFIG_HALT			BIT(18)
+#define PL080_CONFIG_ACTIVE			BIT(17)  /* RO */
+#define PL080_CONFIG_LOCK			BIT(16)
+#define PL080_CONFIG_TC_IRQ_MASK		BIT(15)
+#define PL080_CONFIG_ERR_IRQ_MASK		BIT(14)
 #define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
 #define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
 #define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
 #define PL080_CONFIG_DST_SEL_SHIFT		(6)
 #define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
 #define PL080_CONFIG_SRC_SEL_SHIFT		(1)
-#define PL080_CONFIG_ENABLE			(1 << 0)
+#define PL080_CONFIG_ENABLE			BIT(0)
 
 #define PL080_FLOW_MEM2MEM			(0x0)
 #define PL080_FLOW_MEM2PER			(0x1)