提交 ddd244dd 编写于 作者: E Eric Miao

[ARM] pxa: use 'pxa_last_gpio' instead of 'gpio_nr' in mfp-pxa2xx.c

The 'gpio_nr' can really be inferred by 'pxa_last_gpio', and since we
already have that variable, remove the unnecessary 'gpio_nr' now.

Also, fix the incorrect GPIO number passed in pxa27x_init_irq().

Note: pxa_last_gpio should be initialized earlier, and this is true
since it's been assigned in machine_desc->init_irq().
Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 99687114
......@@ -44,7 +44,6 @@ struct gpio_desc {
};
static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
static int gpio_nr;
static unsigned long gpdr_lpm[4];
......@@ -215,15 +214,13 @@ static void __init pxa25x_mfp_init(void)
{
int i;
for (i = 0; i <= 84; i++)
for (i = 0; i <= pxa_last_gpio; i++)
gpio_desc[i].valid = 1;
for (i = 0; i <= 15; i++) {
gpio_desc[i].can_wakeup = 1;
gpio_desc[i].mask = GPIO_bit(i);
}
gpio_nr = 85;
}
#else
static inline void pxa25x_mfp_init(void) {}
......@@ -276,7 +273,7 @@ static void __init pxa27x_mfp_init(void)
{
int i, gpio;
for (i = 0; i <= 120; i++) {
for (i = 0; i <= pxa_last_gpio; i++) {
/* skip GPIO2, 5, 6, 7, 8, they are not
* valid pins allow configuration
*/
......@@ -313,7 +310,6 @@ static void __init pxa27x_mfp_init(void)
INIT_GPIO_DESC_MUXED(WEMUX2, 53);
INIT_GPIO_DESC_MUXED(WEMUX2, 40);
INIT_GPIO_DESC_MUXED(WEMUX2, 36);
gpio_nr = 121;
}
#else
static inline void pxa27x_mfp_init(void) {}
......@@ -327,7 +323,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
int i;
for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
......@@ -342,7 +338,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
{
int i;
for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
......@@ -375,7 +371,7 @@ static int __init pxa2xx_mfp_init(void)
pxa27x_mfp_init();
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
return sysdev_class_register(&pxa2xx_mfp_sysclass);
......
......@@ -313,7 +313,7 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
pxa_init_gpio(128, pxa27x_set_wake);
pxa_init_gpio(121, pxa27x_set_wake);
}
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册