提交 dda7e6ce 编写于 作者: T Takeshi Kihara 提交者: Geert Uytterhoeven

pinctrl: sh-pfc: r8a7796: Fix SCIF_CLK_{A,B} pin's MOD_SEL assignment to MOD_SEL1 bit10

This patch fixes SCIF_CLK_{A,B} pin's MOD_SEL assignment from MOD_SEL1
bit11 to MOD_SEL1 bit10.

This is a correction to the incorrect implementation of IPSR register
pin assignment for R8A7796 SoC specification of R-Car Gen3 Hardware
User's Manual Rev.0.51E or later.

Fixes: f9aece73 ("pinctrl: sh-pfc: Initial R8A7796 PFC support")
Signed-off-by: NTakeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: NYoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
上级 04ee2ab3
......@@ -488,7 +488,7 @@ FM(IP16_31_28) IP16_31_28 FM(IP17_31_28) IP17_31_28
#define MOD_SEL1_13 FM(SEL_SCIF3_0) FM(SEL_SCIF3_1)
#define MOD_SEL1_12 FM(SEL_SCIF2_0) FM(SEL_SCIF2_1)
#define MOD_SEL1_11 FM(SEL_SCIF1_0) FM(SEL_SCIF1_1)
#define MOD_SEL1_10 FM(SEL_SATA_0) FM(SEL_SATA_1)
#define MOD_SEL1_10 FM(SEL_SCIF_0) FM(SEL_SCIF_1)
#define MOD_SEL1_9 FM(SEL_REMOCON_0) FM(SEL_REMOCON_1)
#define MOD_SEL1_6 FM(SEL_RCAN0_0) FM(SEL_RCAN0_1)
#define MOD_SEL1_5 FM(SEL_PWM6_0) FM(SEL_PWM6_1)
......@@ -1205,7 +1205,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP12_27_24, ADICHS0),
PINMUX_IPSR_GPSR(IP12_31_28, SCK2),
PINMUX_IPSR_MSEL(IP12_31_28, SCIF_CLK_B, SEL_SCIF1_1),
PINMUX_IPSR_MSEL(IP12_31_28, SCIF_CLK_B, SEL_SCIF_1),
PINMUX_IPSR_MSEL(IP12_31_28, MSIOF1_SCK_B, SEL_MSIOF1_1),
PINMUX_IPSR_MSEL(IP12_31_28, TS_SCK1_C, SEL_TSIF1_2),
PINMUX_IPSR_MSEL(IP12_31_28, STP_ISCLK_1_C, SEL_SSP1_1_2),
......@@ -1417,7 +1417,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP17_3_0, CC5_OSCOUT),
PINMUX_IPSR_MSEL(IP17_7_4, AUDIO_CLKB_B, SEL_ADG_B_1),
PINMUX_IPSR_MSEL(IP17_7_4, SCIF_CLK_A, SEL_SCIF1_0),
PINMUX_IPSR_MSEL(IP17_7_4, SCIF_CLK_A, SEL_SCIF_0),
PINMUX_IPSR_MSEL(IP17_7_4, STP_IVCXO27_1_D, SEL_SSP1_1_3),
PINMUX_IPSR_MSEL(IP17_7_4, REMOCON_A, SEL_REMOCON_0),
PINMUX_IPSR_MSEL(IP17_7_4, TCLK1_A, SEL_TIMER_TMU_0),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册